Robert Sorby TurnMaster HSS Box Cutter
RSTM-TIP5
TurnMaster HSS Box Cutter (RSTM-TIP5)
This super fine grain structure will provide a razor sharp edge.
The result is a superior finish to your turning projects and less need for sanding.
Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.
Sharpens to 0.2 - 0.4 microns.
Hardness 62RC.
Material M2 High Speed Steel.
Better used...
Odie's Dark Oil
ODO250
Odie's Dark Oil
These special Odie’s finish products contain natural oxidizing oils that darken wood not only when applied, but also as wood ages and will also add contrast and patina with age. Use alone or together with other Odie’s products to add polish and sheen.
Odie’s Dark Oil creates incredible contrast. Blacks pop with this product. Use to not only darken any wood...
Robert Sorby Three Piece Micro Hollow/Ornamental Set
A38HS3T
This set of micro turning tools has been specifically designed for miniature hollowing.
Mick Hanbury Woodturning Course Tool Set
TRTURNINGCOURSESET
This set is recommended by Mick Hanbury and produced in partnership with Turners Retreat and manufactured by Robert Sorby, the set comprises of 6 woodturning tools.
All the essential tools required for bowl and spindle turning.
-Spindle Roughing Gouge 3/4"
-Fingernail Bowl Gouge (Deep Flute) 3/8"
-Standard Parting Tool 1/18"
-Standard Skew 1/2"
-Fingernail Spindle...
Robert Sorby Patriot Chuck Long Nose Jaws
RSJLN
Patriot Chuck Long Nose Jaws
Rough turned bowls can be remounted internally with the reach of almost 4" of these jaws.
Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2" away from the chuck body.
SAFELOCK Woodworm Screw for Cole Jaws
WWCJ
This Woodworm screw fits into the NOVA Cole jaws. It is longer than the standard screw to allow it to protrude sufficiently beyond the jaw. The major advantage is the support the Cole jaws offer to the back of the blank, especially when turning larger diameter blanks. The strong thin edged thread form cuts into wood for maximum holding power. The threads are 2mm deep with a 7mm diameter core. The...
12" Traditional Brass Back Tenon Saw
TR9550B
Spear & Jackson Traditional Brass Back Woodworking Saw 12" x 15pts
This Traditional Brass Back Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials.
Universal teeth for general use, cuts along and across the grain
Brass back for maximum rigidity
Comfortable, strong wooden handle securely fixed by rivets
High carbon steel blade
...
Robert Sorby Slick Edge Guard
289E
Slick Edge Guard (F289EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 60mm and 85mm, these tough leather guards are a snug fit for the Slicks (289)
Robert Sorby Micro Veiner 1.5mm
P501101
Micro Veiner 1.5mm (P501101)
Precision closed-die forgings ensure accurate shape and size of every blade.
The size and design of the handles puts Robert Sorby's micro tools ahead of all others.
The handles are larger and therefore more comfortable - particularly during prolonged use.
Solid brass ferrules enhance the overall design but are also functional when suspended in a tool rail.
Highly...
Pinata Colour Exciter Alcohol Inks
PCEP9
These Jacquard Piñata Alcohol Inks are high quality, dye based inks which are compatible with GlassCast clear epoxy coating resin.
Offering vibrant, highly saturated colours, these versatile inks are perfect for creating the amazing and very popular Resin Petri Art, tinting resin and creating stunning artwork which can then be coated with a layer of GlassCast resin afterwards to protect your...
Robert Sorby Square/Pointed Cutter
RS220
Square/Pointed Cutter (RS220)
One of two double ended chattertool cutters that will produce a myriad of decorative patterns.
Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre.
To be produced on end grain only.
Sharpening:
Use a diamond...
6mm Shear Cup Carbide Cutter
RDS61
6mm diameter Shear Cup Cutter suitable for the Pro-Hogger and Little Hogger 2.35mm thick 7' cutter angle Also suitable for: Osprey #1 Hercules Hunter Tools Jackosky Hollow pro Rocket JT Tools Hunter Retrofit Jimmy Clewes Mate 1
Lion King Stamp Set
J80020
Lion King Woodware Clear Stamp Set
Peel the stamp from the protective sheet and place on an acrylic block (no adhesive required). They can be used with any ink pad – use with a dark ink on card or a light ink on wood to follow the lines when burning with a pyrography tool. Clean after use and return to the protective sheet for storage before using again.
Wooden Wool 100g
J60030
Wooden wool material.
Ideal loose fill packaging material. Can also be used in decorative applications such as gift packaging in a box or hamper.
Bag of wooden wool: 100g
Box sold separately.
Robert Sorby ProEdge Table & Arm
PETA
ProEdge Table & Arm
Replacement part for the Robert Sorby ProEdge Sharpening System.
Robert Sorby TurnMaster HSS Square Cutter
RSTM-TIP3
TurnMaster HSS Square Cutter (RSTM-TIP3)
This super fine grain structure will provide a razor sharp edge.
The result is a superior finish to your turning projects and less need for sanding.
Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.
Sharpens to 0.2 - 0.4 microns.
Hardness 62RC.
Material M2 HSS.
Better used for external...
Sycamore Leaves Artist's Stencils
HSSYCS
Hampshire Sheen's new vinyl stencils are precision cut from professional grade paint masking vinyl and can be used as part of virtually any application technique. Have a go with air brushes, daubing with sea sponges, painting or anything you like!
Being light solvent resistant, Hampshire Sheen stencils can be used to apply water or alcohol based colours, aerosols, metallic or other mediums.
30...
Robert Sorby Square Nose Scraper 1"
B801105
Square Nose Scraper 1"
Slightly narrower than the heavy duty scrapers but produced from thicker 1/2" (13mm section).
Designed for finishing convex and flat bottomed forms.
Lifetime HSS Guarantee.
Robert Sorby Excelsior Round Scraper Tip
RS230GC
Excelsior Round Scraper Tip (RS230GC)
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning.
An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Hollowmaster the...
Robert Sorby TurnMaster Excelsior Square Cutter
RSTM-GT3
TurnMaster Excelsior Square Cutter (RSTM-GT3)
Titanium Nitride bonded onto quality High Speed Steel, provides the same advantages as HSS whilst enhancing the cutting life of the tool tip.
Use the same traditional sharpening equipment used for HSS.
Sharpens to 0.12-0.2 microns.
Harness of coating up to 85RC.
Material is Titanium Nitride on M2 HSS.
Better used for external waste removal,...
Robert Sorby Modular Micro Pen Gouge
B888/13
Modular Micro Pen Gouge (B888/13)
Pen turning has always attracted woodworkers with a taste for highly finished, eye-catching work. This tool is commonly used for preparing acrylic pen blanks.
The 8mm spindle roughing gouge has a shallower flute than a traditional roughing gouge. The shallow flute allows for more finesse and control when turning down to the required size. This reduces the chances...
Diamond Carbide Cutter
DIA10R
Cutter Size: 10mm x 28mm diamond shape 2.5mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.15mm diameter Suitable for: Rockler Mini Carbide Turning Tool (cutter D1) Penn State industries Carbide Magic Detailer Easy Wood Tools - Easy Detailers (except micro & mid-size micro) (cutter (Ci4)
Robert Sorby Modular Micro Boring Tool
B888/6
Modular Micro Boring Tool (B888/6)
This tool is designed for boring out apertures and for straight hollowing on small projects.
Compatible with the Robert Sorby Modular Micro Aluminium Handle (B888).
Robert Sorby Domed Cutter
RS221
Domed Cutter (RS221)
One of two double ended chattertool cutters that will produce a myriad of decorative patterns.
Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre.
To be produced on end grain only.
Sharpening:
Use a diamond...
Turning Bowls with Richard Raffan
BTBRR
From the Back Cover The world’s pre-eminent woodturning teacher provides everything you need to know for turning bowls. From wood selection and design advice to surface embellishment and finishing techniques, the detailed text and step-by-step photos are inspiring. Turning Bowls is for all levels of turners, from beginners looking for advice every step of the way to advanced turners looking for...
Robert Sorby Sovereign Counterweight
SOV-CW
Sovereign Counterweight (SOV-CW)
There is an internal thread in the end cap allowing for the fitting of a counterweight.
This means that the weight is always in the bottom of the handle where you want it.
Robert Sorby Diamond Side Scraper
825
Diamond Side Scraper (825)
Used on square bottomed boxes the end profile allows the tool to create a right angled juncture between side wall and bottom.
The 85 degree angle at the end prevents the tool from cutting the side wall and the bottom at the same time.
Lifetime HSS Guarantee.
Robert Sorby TurnMaster Unhandled Chisel Includes 3 Carbide Cutters
RSTM-SCT123
TurnMaster Unhandled Chisel Includes 3 Carbide Cutters (RSTM-SCT123)
Providing choice and flexibility in one easy to handle tool.
This is an unhandled tool but will fit directly into your Sovereign Handle using a 1/2" collet.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between...
Mini Carver MkII
MIN900
Arbortech Mini Carver MkII
The Mini Carver MkII is fitted with Arbotech’s latest 1,000W motor. Whether shaping, sculpting or sanding it has plenty of power and more. The Arbortech Mini Carver is a hugely versatile power carving tool. From rough shaping to sculpting, texturing, and sanding, the Mini Carver can do it all. The Mini Carver’s narrow, extended neck offers greater access into...
Robert Sorby Modular Micro Diamond Side Cut
B888/12
Modular Micro Diamond Side Cut (B888/12)
Compatible with the Robert Sorby Modular Micro Aluminium Handle (B888).
Razertip SL3 Pyrography Unit (Power Supply Only)
SL3-UK-PS
Razertip SL3 Pyrography Unit (Power Supply Only). You will require a pen and cord to use the SL3 power supply. They are not included in the box, only available to buy separately.
Rubber Mallet - White
633608
Semi-hard white rubber mallet.Will not mark or discolour surfaces.Hardwood shaft.16oz.
Robert Sorby Excelsior Medium Tear Drop Cutter
RS200GC
Medium Tear Drop Cutter (RS200GC)
The Robert Sorby Excelsior medium tear drop cutter provides a multi-facetted, highly efficient cutting edge in a durable coating.
As with all teardrop cutters, the shape effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms.
Use the straight edge on outside curves...
Robert Sorby TurnMaster Carbide Detail Point Cutter
RSTM-CT2
TurnMaster Carbide Detail Point Cutter (RSTM-CT2)
Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.
Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.
Sharpens to 0.7 microns.
Hardness is 90RC.
Material is micro grade tungsten carbide.
Better...
Robert Sorby Bowl Finishing Outboard Scraper
B800704
Bowl Finishing Outboard Scraper (8007)
Produced with a massive 1 1/2' x 3/8' (38mm x 10mm) section to absorb vibration and ensure stability making it ideal for long overhangs over the tool rest when producing deep vessels.
Designed for finishing when working in the outboard mode of the lathe.
Lifetime HSS Guarantee.
Mini Detail Knife
KN27
The Mini Detail Knife has the smallest 19mm straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
Robert Sorby Shallow Hollowing 14" Tool
B850001
Shallow Hollowing 14" Tool (850H)
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber.
The smallest (850H) is designed to work through the narrowest of apertures, down to as small as 3/8" (10mm).
Burn-through Transfer Paper
PSPAP
Razertip Burn-through Transfer Paper
Create stunning woodburning designs with the help of Razertip's Pyro Studio burn-through transfer paper. Our top-quality transfer paper is specifically crafted to transfer intricate patterns onto your work surface with ease. Whether you're a pyrographic enthusiast or just starting out with woodburning, our paper will help you bring your designs to life...
Tormek - Sp-650 Stone Grader
SP-650
The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening.This has obvious advantages.You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same setting of the jig.Besides being a very fast method, you achieve a perfect edge...
Carpenters Block Plane 6.5"
TRCBP65
Spear & Jackon No. 6 1/2" Block Plane.
Ideal for end grain work and single-handed operation.
Cast iron body
Precision milled base and faces
35mm wide low angle cutter and fully adjustable mouth
Brass adjusting screw
5" Draw Knife
KN16
This Draw Knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape.
A leather sheath is included to help protect your cutting edge.
Rc Pro-Carving Blade
RC115
The RC Pro-Carving disc from Rotarex allows any 115mm angle grinder to be utilised as an effective carving machine, Rotarex Pro-Carving discs feature six alternating teeth each followed by a limiter that regulates the cut and virtually eliminates the threat of kickback. Precision manufactured in Europe from stainless steel and hand sharpened, re-sharpening of the disc is also easily carried out with...
Proxxon LHW Long Neck Angle Grinder
TR28547
Proxxon LHW Long Neck Angle Grinder
Perfect for craft or hobby use, this tool is for cutting, rough machining, grinding, precision polishing, fine polishing and carving many materials including steel, non ferrous metals, glass, ceramics, wood and plastics. With 50mm diameter discs, it features a specially balanced, 100W powerful, quiet and long lasting DC motor. Comfortable to hold with a length...
Noise Reducing Ear Defender
SENS31
SensGard Noise Reducing Ear Defender
Hearing protection that filters out damaging noises while allowing speech and other important sounds to be heard!
HEAR SMARTER hearing protection shields against damaging noise while still allowing to you to hear people speaking to you or other communications when in a noisy environment.
How it works: Soft ear cuffs from a secure comfortable seal around...
Carpenters Try Square
TRCTS
Spear and Jackson Carpenters Try Square
The perfect hand tool for checking and marking right angles in constructional work.
It is rosewood stained with a brass top and bottom face for increased durability.
Features:
Perfect for marking right angles
Rosewood stained hardwood with brass top and bottom faces
Spring steel blade.
Available as a 6", 9" or 12" square