Decorative

Self adhesive Black velour.17.5" wide suitable for the base of wooden items or for lining the inside of boxes.Available in 1m or 5m.

Self adhesive Green velour.17.5" wide suitable for the base of wooden items or for lining the inside of boxes.Available in 1m or 5m.

Self adhesive Red velour.17.5" wide suitable for the base of wooden items or for lining the inside of boxes.Available in 1m or 5m.

High quality Calibrated Mixing cups ideal for when you need to measure out and mix resins by volume. These high quality cups are made from a see through plastic so you can easily check the resin level against the graduated markings. Again to make reading easier, the graduations are printed to enable reading looking into the cup and feature graduations for basic volume in ml as well as several graduation...

Designed to add an even shimmer to your work, these metallic paints will really make it glow. Mix and match them, use them to highlight certain areas or cover everything in them, the choice is yours. Available in 8 different colours: - Dark blue - Pink - Silver - Gold - Black - Green - White - Copper Best used over one of Chestnut's sanding sealers, apply a spray lacquer over them once dry to seal...

Americana Chalkboard Paint is an acrylic paint that turns nearly any porous surface into a chalkboard. This paint provides simple soap-and-water cleanup and comes in a water-based, non-toxic formula.

Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...

Filling cracks, burrs and fissures in timber is very popular using different materials.Fastglas Resin and Hardener is used with Aluminium, Brass and Copper powders.Mix the resin with a metal powder to a paste and add the hardener.Fill the gaps in your work, leave to set and then sand flat.Full instructions supplied on request.

High-temperature, pressure sensitive PET tape with silicone adhesive used in a very wide range of composites processes including resin infusion and pre-preg. 66m Roll. 25mm and 50mm widths available. Flash/release breaker tape is very commonly used in the aerospace and wider composites industry, particularly in vacuum bagging, resin infusion and pre-preg processes where it serves number of uses including...

GlassCast 10 is suitable for Smaller Castings up to 10mm thick, such as jewellery.GlassCast 10 is a water-clear, UV resistant clear casting resin developed for smaller or thinner castings such as jewellery, 3D resin-art, gaps/knots/wood inlays and more. It can be used to make parts up to around 10mm thick in a single pour.Because GlassCast 10 has been developed as a casting resin and not a coating...

GlassCast 50 is suitable for Thick Castings up to 50mm thick.GlassCast 50 is a water-clear, UV resistant epoxy casting resin developed specifically to meet the demands of thick section casting - especially in contact with wood - making it the ultimate 'river table' epoxy.Its slow-curing formulation allows it to be poured in depths of up to 50mm (25mm into wood) per layer without overheating. Recommended...

The Iwata Airbrush is suitable for beginners and professionals for all applications and can be used with a variety of different paints and mediums. The Iwata gravity feed airbrush is preferred when working in small to medium sized areas with small amounts of paint. Gravity feed airbrushes perform well at lower air pressures, which help create greater detail. It's so easy to use and clean too. The interchangeable...