Precision Carving System
PCS1000
Arbortech Precision Carving System
The Arbortech Precision Carving System is designed for free form carving, sculpting, detailing and texturing. The system consists of a Universal Base, which fits onto the Arbortech Power Carving Unit or a 100mm or 115mm angle grinder with an M14 thread. Into this base you have the choice of attaching either the Ball Gouge, Barrel Carver or Drum Sander. The system...
NOVA Nebula Bed Extension
55262
NOVA Nebula Bed Extension
The NOVA 55262 16” Bed Extension Accessory for Nebula, adds an extra 16” between centre capacity. Add as many extensions as you require for your project.
Easy to install.
Made from solid cast iron, with CAD designed webbing throughout, providing rigid strength and stability.
Comes with instructions and fasteners.
Weight: 41lbs (18.6kg)
NOVA Neptune Bed Extension
55265
NOVA Neptune Bed Extension
The 16″ (406mm) Bed Extension is a great add on accessory for your Neptune series lathes evolution. Made from Solid Cast Iron and CAD engineered to provide stability and sound dampening. This extension will bring your Neptune Benchtop to 34″ between Centers and the Neptune Max to a staggering 44″.
Easy to install.
Made from solid cast iron, with...
NOVA Neptune Outrigger
55266
NOVA Neptune Outrigger
This outrigger allows you to turn up to 20″ diameter platters and bowls in the outboard mode.
Made from solid cast iron, providing rigid strength and stability.
Arms are easy to articulate and the camlocks make it fast and easy to move into position and lock.
Size: Length 20.5″ (520Mm) x Width 4.7″ (120mm) x Height 14.2″ (360mm)
Weight:...
No.4 Turning Tool Handle (700/4)
HTT4
14" Ash Handle for woodturning tools, complete with ferrule and end cap.
NOVA Comet II Bed Extension (Grey)
Fits the NOVA Comet II Midi Lathe. This unit enables the spindle length of the NOVA Comet II Lathe to be expanded.
Each extension adds 23.4″ in length to the lathe (the standard NOVA Comet II Midi Lathe lathe comes with 16.5″ between center length) Made from solid cast iron for long life and maximum strength and rigidity.
Adds 24.6″ length to your NOVA Comet II Lathe
Solid...
8mm Scorp
KN23
KN23 5/16" (8mm) Right-Handed Scorp
KNL23 5/16" (8mm) Left-Handed Scorp
Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available.
Left-Handed carvers should choose a left-handed tool to cut towards yourself....
Patriot Chuck Jaws 2"
RSJ2
With a fine internal and external dovetail, these jaws are perfect for fine intricate or miniature projects.
Battery-Powered Long Neck Angle Grinder
TR29815
Proxxon Battery-Powered Long Neck Angle Grinder LHW/A
You can use the LHW/A for work on steel, non-ferrous metal, glass, ceramics, wood and plastic. It can cut, texture, sand or grind. The variable electronic speed control still has high torque, even in the lower speed range. It takes 50mm diameter discs. The extended neck allows easy access into narrower spaces. This professional quality battery-powered...
Robert Sorby Select Professional Tenon Saw 12” (305mm) x 13TPI
RS-5412K
12” (305mm) hardened and tempered carbon steel blade with a brass back for lasting strength and durability.
13TPI resharpenable blade for prolonged use in wearing environments.
Brass screws for corrosion resistance.
Wooden handle for a professional and aesthetically appealing finish.
Tool Rest - 8" For DML320
Toolrest for Coronet Envoy, Coronet Regent, DML320, CL3, CL4 and MAXI-1 Lathes.
Robert Sorby Select Carpenters Jack Plane No.5
RS-CJP5
Cast iron body for strength and robustness
Precision milled base and faces for enhanced accuracy
50mm (1 15/16”) wide high carbon steel blade for durability
Brass adjusting screw
A versatile plane, suitable for stock removal, surface flattening, smoothing, and general preparation
Supplied with a blade
Spare blade available :
RS-CJP5BLADE
Robert Sorby Five Piece Bevel Edge Chisel Ash Handle Set
5169
Five Piece Bevel Edge Chisel Ash Handle Set (E1695ST)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby 8" Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
Three Piece Chip Carving Set
KN115
The Flexcut Chip Carving Set is everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the chip carving craft. Lettering is also very much part of the art form - carving the name of somebody special on the boxes, address blocks, wall plaques and other objects you make, turns them into very personal keepsakes that can be cherished and even handed down generation...
Robert Sorby Gilt Edge Tapered Bolster & Ferrule Chisel
530
Gilt Edge Tapered Bolster & Ferrule Chisel (F530)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Arbortech Mini Pro
MIN630
Arbortech Mini Pro
Designed for use with the Arbortech Mini Carver, the Mini Pro broadens the scope of the carver and opens up new carving possibilities.
The Mini Pro is a 50mm diameter blade with 2 tungsten carbide cutting teeth. These teeth are circular and rotatable, ensuring you get the maximum possible use from their edges. When eventually worn they are easy to replace. You can use this...
Five Piece Octagonal Boxwood Handled Chisel Set
5167
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.They can be used either free-hand making a gentle paring cut or with light mallet strokes. Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails. Not recommended for heavy duty applications.Robert Sorby offers...
Razertip P88 Pyrography Base Unit
P88-GB-PS
Razertip P88 Pyrography Unit (Power Supply Only). You will require a pen to use the P88 power supply. There is no pen included in the box, only available to buy separately.
Scorp Set
KN150
Scorps Set includes:
KN12 - Cutting Knife
KN13 - Detail Knife
KN18 - Pelican Knife
KN19 - Mini Pelican Knife
Presented in a handy tool roll with a specially shaped strap. Choose a right-handed tool to cut towards you and a left-handed tool to cut away from you.
Robert Sorby Micro Cranked Tool 3/16"
B87706W
Micro Cranked Tool (B87706W)
The cranked tool is ideal for taking the undercuts required in miniature hollowing work.
Use in combination with the Hook tool to create some unbelievably small hollow forms.
Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
Lifetime HSS Guarantee.
Hollow Roller System - Unhandled
HR-1000U
The hollow roller is a torque arrestor tool rest which attaches to the lathe through the users existing banjo, an auxiliary height adjustable tool rest and the unique profile Hollow Roller boring bar (3/4 quarter round diameter) with high speed steel scraper bit. The only other parts needed are the Hollow Roller stud adaptor to fit your size lathe banjo and a desire to create unique artful vessels...
Robert Sorby Select Carpenters Try Square
RS-CTS
Spring steel blade for strength and flexibility.
Durable brass top and bottom faces for corrosion resistance.
Traditional hardwood stock for durability in wearing environments and natural shock absorbance.
Available in 6” (152mm), 9” (229mm) and 12” (305mm) sizes.
Robert Sorby Select Sash Clamp
RSC24
Durable steel bar offering maximum tensile and yield strength, achieving a clamping force of 500kgf.
Slightly tapered jaws enable parallel clamping. Ductile head and slide are guaranteed unbreakable.
Tommy bar will bend before the clamp becomes over stressed to prevent further damage.
Twin start rolled acme thread applies quick and smooth pressure to the workpiece.
Flat bottomed head and...
Leather Tool Roll
888TROLL
This easy to carry and store leather tool will keep your tools safe and in good condition. Made from quality Sheffield sourced leather the tool roll features 12 pockets, ideal for Robert Sorby's modular micro tools.
Robert Sorby 22” Traditional Sorby Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
Robert Sorby TurnMaster Handled Chisel with Detail Carbide Cutter
RSTM-HCT2
TurnMaster Handled Chisel with TCT Detail Cutter (RSTM-HCT2)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way...
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...
Knife Jig Wearplate Only
You can order the following replacement part for your ProEdge System- WPEKWPLATE, Knife Backplate.
Robert Sorby Select Traditional Brass Back Tenon Saw 12” (305mm) x 15TPI
RS-9550B
12” (305mm) hardened carbon steel blade with a brass back for lasting strength and durability.
Cuts on both forward and backward stroke. 15TPI resharpenable blade for prolonged use in wearing environments.
Brass-riveted handle provides enhanced security and stability during use.
Wooden handle for a professional and aesthetically appealing finish.
Robert Sorby Select Spare Blade to Fit CBP95 Block Plane
RS-CBP95BLADE
Spare blade to fit RS-CBP95 - 9 ½ Block Plane.
Ground and hardened carbon steel for strength and durability.
Ideal to have as a spare, or to be bought as a replacement.
We offer spare blades for all of our Carpenter's Planes.
Robert Sorby Select Carpenters Sliding Bevel
RS-CSB
Rosewood-stained hardwood body for strength and durability.
Spring steel blade for resilience, reliability, and flexibility.
Brass screw and accent features for corrosion resistance and a traditional appearance.
Available in three different sizes :
7 1/2" Carpenters Sliding Bevel RS-CSB75.
9" Carpenters Sliding Bevel RS-CSB9.
10 1/2" Carpenters Sliding Bevel RS-CSB105.
Robert Sorby Select Mini One Handed Bar Clamp
RSOHBC6-MINI
Carbon steel bar and reinforced nylon body for strength and durability.
60mm (2 3/8”) throat depth, achieving a clamping force of 75kgf.
Convenient quick release trigger allowing the clamp to be positioned and released with ease.
Push-button system enabling the clamp to be changed into a spreader for enhanced versatility.
Ergonomic soft-feel handle grip for user comfort.
Removable...
Robert Sorby Select Micro Bar Clamp 4"
RSOHBC4-MICRO
Carbon steel bar and reinforced nylon body for strength and durability.
36mm (1 3/8”) throat depth, achieving a clamping force of 25kgf.
Convenient quick release trigger allowing the clamp to be positioned and released with ease.
Ergonomic soft-feel handle grip for user comfort.
Removable pads securely attached to the clamp and incorporate a toe-in feature, ensuring an even distribution...
Compact Double Motor Wall Mounted Extractor
CGV286-3WALL
This compact wall mounted machine has a large 150 litre capacity and is ideal for serving extraction systems in smaller workshops. The waste is collected in reusable bag which is fitted to the exterior of a strong steel cage to retain its shape. The cyclonic neutral vane theory technology draws the waste into the drum with great force and directs it around the outside edge, keeping the filters cleaner...
Robert Sorby Traditional Bolster & Ferrule Chisel
F16906A
Traditional Bolster & Ferrule Chisel (F169)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
NOVA Nebula Outrigger
55261
NOVA Nebula Outrigger
The Nova 55261 Fixed mount Outrigger gives your Nebula Lathe the ultimate in outboard turning stability, with a capacity of up to 35'' in diameter.
With both 90° and 180° mounts included, you can position the outrigger however it works best for your shop and your turning needs.
The fixed leg ensures a vibration-free experience.
Made from solid cast...
No. 2 Double Hooped Handle
680-2
These handles are crafted from robust, high-quality ash, designed to withstand the rigours of heavy-duty framing. Their ergonomic shape provides a comfortable, secure grip, giving you maximum control and leverage when working on deep mortices or large joints.
No.5 Turning Tool Handle (700/5)
14" Handle.
These handles are crafted from carefully selected ash, combining strength, durability, and a naturally comfortable grip. Their classic finish highlights the beauty of the ash grain while ensuring long-lasting performance in the workshop.
Robert Sorby Sovereign Ultima Head - No Cutter
SOV-ULTMHEAD
Ultima Head without cutter (SOV-ULTMHEAD)
The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of...
Saw Tooth Setter
TR94-370R
Eclipse Saw Tooth Setter
Used for setting teeth on resharpenable woodsaws.
7.1/4"(184mm) overall length
Powder coated metal head
Nickle plated anvil
Soft feel rubber handle grips
Knurled adjustment screw for increased torque/
Painted metal head and nickel plated anvil for rust resistance
Metal handles for extra strength and durability
Soft feel, non-slip rubber handle grips...
Robert Sorby Select Spare Blade to Fit CBP65 Block Plane
RS-CBP65BLADE
Spare blade to fit RS-CBP65 - 6 ½ Block Plane.
Ground and hardened carbon steel for strength and durability.
Ideal to have as a spare, or to be bought as a replacement.
We offer spare blades for all of our Carpenter's Planes.
Floor Stand for Wall-Mount Camvac Extractor
104950
This stand brings even greater versatility to the CamVac range, allowing the huge 150 litre capacity of the CGV286-3-WALL to be used in workshops where it is not possible or desirable to mount the extractor to the wall.
The stand holds the extractor securely at a height which allows easy access to the collection bag, for quick and simple emptying.
The stand and machine sit securely on the workshop...
Robert Sorby Select Carpenters Smoothing Plane
RS-CSP
Cast iron body for strength and durability.
Precision milled base and faces for enhanced accuracy.
Sharp 45mm (1 3/4 ) / 50mm (1 15/16”) wide high carbon steel blade, suitable for final surface preparation.
Brass adjusting screw.
Supplied with a blade.
Available in two sizes : RS-CSP3 & RS-CSP4.
Spare blade available : RS-CSP3BLADE & RS-CSP4BLADE.
Sundström P3 Particulate Replacement Filter
H02-1312
One Sundström P3 Particulate Replacement Filter
Sundström P3 filters are compatible with all Sundström’s masks - whether they are half-face, full-face or powered respirators.
Designed for use with the Sundström range of half-face and full-face respirator masks, this SR 510 P3 R particulate filter offers respiratory protection against fine dusts and fumes, as well as...
Robert Sorby Select Spare Blade to Fit CSP3 Smoothing Plane
RS-CSP3BLADE
Spare blade to fit RS-CSP3 - No.3 Smoothing Plane.
Ground and hardened carbon steel for strength and durability.
Ideal to have as a spare, or to be bought as a replacement.
We offer spare blades for all of our Carpenter's Planes.