8" Robert Sorby Traditional Dovetail Saw
New
Made in Britain
8" Robert Sorby Traditional Dovetail Saw DS820
Robert Sorby 8″ Traditional Dovetail Saw Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints. Made from alloy spring steel Laser marked with Kangaroo logo Stained Sapele handle Straight tooth line Hand sharpened blade,...
£124.99
12" Robert Sorby Traditional Tenon Saw
New
Made in Britain
12" Robert Sorby Traditional Tenon Saw TS1213
Robert Sorby 12″ Traditional Tenon Saw Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making. Made from alloy spring steel Laser marked with Kangaroo logo Sapele handle Straight tooth line Hand sharpened blade,...
£119.99

22” Robert Sorby Traditional Sorby Panel Saw
New
Made in Britain
22” Robert Sorby Traditional Sorby Panel Saw PS2210
Robert Sorby 22” Traditional Panel Saw The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws. Made from alloy spring steel Laser marked with Kangaroo logo Sapele handle Straight tooth line Hand sharpened blade, can be re-sharpened Brass plated screws and...
£124.99
6" - Gents Saw
6" - Gents Saw PAXG
The perfect partner to the PAX quality hand and tenon saw, this saw has an alloy steel blade with a mirror finish, high quality, brass back and an attractively finished rosewood handle as standard.20tpi
£20.52

Flush Cut Saw
Flush Cut Saw PAXF
The Pax flush cutting saw has a flexible alloy steel blade which cuts on the pull stroke. This saw is very suited for cutting dowels etc. The same high quality and attractively finished walnut handle is standard and is suitable for the highest precision of work. 20tpi as standard, blade length 6". Special Flexible blade for cutting dowels flush against the surface of wood - no set means...
£19.26
Jewellers Saw
Jewellers Saw PAXJ
The Pax jewellers saw has a very thin alloy steel blade with a mirror finish high quality brass back. The same high quality and attractively finished rosewood handle is standard and suitable for the highest precision work. 20tpi as standard, blade length 6". For cutting very small pieces of soft metals - the saw has no set on the teeth Walnut Handle with Brass Ferrule Mirror Polished...
£22.74

Razor Saw
Razor Saw PAXR
The Pax Razor Saw is made to the same specification as the jewellers saw but has 40tpi with a 6" blade. It is suitable for high precision work and will give an excellent finish. Walnut Handle with Brass Ferrule Mirror Polished Brass Back Etched with PAX logo
£23.28
10" Traditional Professional Tenon Saw10" Traditional Professional Tenon Saw
10" Traditional Professional Tenon Saw TR5410Y
Spear & Jackson Traditional Professional Woodworking Tenon Saw 10" x 13pts The Spear & Jackson Traditional Professional Tenon Saw is used for joint cutting & sawing small pieces of wood Universal teeth for general use, cuts along and across the grain Precision cross ground teeth for extra sharpness Solid brass back for maximum rigidity Comfortable wooden handle secured...
£30.36

12" Traditional Brass Back Tenon Saw12" Traditional Brass Back Tenon Saw
12" Traditional Brass Back Tenon Saw TR9550B
Spear & Jackson Traditional Brass Back Woodworking Saw 12" x 15pts This Traditional Brass Back Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials. Universal teeth for general use, cuts along and across the grain Brass back for maximum rigidity Comfortable, strong wooden handle securely fixed by rivets High carbon steel blade ...
£27.98