SteadyPro Turning SystemSteadyPro Turning System
SteadyPro Turning System STEADYPRO
The Robert Sorby SteadyPro is a very easy to use jig that gives additional tool support when hollowing as well as many other woodturning operations. The versatile SteadyPro fits a wide range of woodturning lathes by utilising the stems from the Robert Sorby modular tool rest system. The easy to adjust cantilever action of the clamping rollers, ensures the optimum control for a large selection of...
from £106.99
Tool Rest StemTool Rest Stem
Tool Rest Stem 765-S
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems...
£12.25

Tool Rest Cross BarTool Rest Cross Bar
Tool Rest Cross Bar 766
These crossbars are case hardened to avoid those irritating little nicks, so that your tool moves along smoothly.Available in 4', 6' and 9' lengths.
from £21.99
9" Internal Bowl Rest9" Internal Bowl Rest
9" Internal Bowl Rest 767
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm...
£31.99

9" External Bowl Rest9" External Bowl Rest
9" External Bowl Rest 767E
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm...
£31.99
Box Turners Table
Box Turners Table 768
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4', 6' and 9' as well as a 9' curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£13.75

StebcentreStebcentre
Stebcentre STBCENTRE
The original Stebcentre is a lathe drive centre with several unique features.It uses razor sharp serrated teeth to grip the work piece, without the need for pre-marking the wood with the drive prior to putting it onto the lathe.The greatest benefit the Stebcentre has over any other driver available on the market is the spring loaded centre point.Pressure can be applied so the wood can be driven with...
from £57.25
Revolving StebcentreRevolving Stebcentre
Revolving Stebcentre REVSTEBCEN
A revolutionary idea of using a revolving live centre with the head of a Stebcentre. This allows for basic off-centre work to be achieved, such as cabriolet candlesticks as well as multi-sided boxes and even small multi-sided bowls when used in conjunction with an original Stebcentre or the new Steb Drive.
from £66.99

Steb DriveSteb Drive
Steb Drive STBCHUCK
The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.
from £57.25
Deluxe Hollow Revolving CentreDeluxe Hollow Revolving Centre
Deluxe Hollow Revolving Centre REVDXCEN
Robert Sorby Deluxe Hollow Revolving Centre 1MT & 2MTThis revolving centre comes with a 60' removable point, the most popular workhorse in the range of accessories for this tool. Comes complete with convenient ejector tool. It is a high quality live centre made to last. This too comes in 1 and 2 morse taper.
£72.75

Hollow Revolving Centre Set
Hollow Revolving Centre Set REVKITCEN
Revolving Centre Sets comprise a high quality hollow revolving centre and seven popular accessories in a sturdy fitted storage box. These sets feature a stub morse taper fitting. Comes complete with ejector tool.
£98.99
Precision Boring SystemPrecision Boring System
Precision Boring System 765
Inlaying adds character. A Precision Boring System is used in conjunction with the Indexing System for accurate hole boring in work pieces. Pre-bored hardened steel inserts are available in: Metric 6mm, 9mm and 12mm Imperial inches 1/4", 3/8" and 1/2" Corresponding HSS brad point bits ensure total accuracy when drilling. For use in conjunction with the Indexing...
£66.50

NOVA 1624/XP Outrigger Unit
NOVA 1624/XP Outrigger Unit 55223
This unit will allow you to increase your turning capacity allowing you to turn larger items on the Outboard end of the Headstock. Up to 29" (740mm) with standard NOVA lathes. Solid Cast Iron Vibration dampening Quick to add, remove or move out of the way For NOVA Galaxi, XP, 1624 and 1624 II Lathes
£194.99
NOVA 1624/XP Bed Extension UnitNOVA 1624/XP Bed Extension Unit
NOVA 1624/XP Bed Extension Unit 55224
Adds between center capacity for your NOVA DVR 2024, DVR XP, 1624 and 1624 II Lathes. Each extension adds 20' between center capacity. Add as many extensions as you require for your project. Easy to install. Made from solid cast iron with CAD designed webbing throughout, providing rigid strength and stability. In the new black color, with new decaling. Works best with the 1624 II lathe but can be used...
£209.99

Stand for NOVA Comet II Midi Lathe
Stand for NOVA Comet II Midi Lathe 47050
The NOVA Comet II Stand Accessory provides a free standing platform for your NOVA Comet II Midi Lathe. It gives you a mobile and stable work support. Its rugged tubular steel design provides strength without adding a lot of unnecessary weight. The powder coated finish provides durability in all conditions. The specially designed V-legs allows more room under the lathe for maneuvering. The stand adjusts...
£191.99
Lathe Handwheel Unit for DVR LathesLathe Handwheel Unit for DVR Lathes
Lathe Handwheel Unit for DVR Lathes LHB
The NOVA Handwheel is used on the outboard end of the headstock spindle. It can be used to position work by hand or to slow down the spindle by hand once the lathe is switched off. Made from precision machined solid 1045K steel for extra strength and rigidity. A custom wooden handwheel can be designed by the user to insert this handwheel into for extra comfort. It comes standard with all NOVA DVR lathes...
£38.99

Woodsurfers Bowlrest
Woodsurfers Bowlrest 9006
NOVA 9006 Woodsurfer Bowl Rest is a unique curved toolrest to make bowl turning easier. Excellent for large bowls. With a 1' shank for a super strong platform and solid cast iron for maximum strength. Fits all NOVA lathes (excluding the NOVA 46000 Comet II Midi Lathe) and suitable for all lathes with a 1' toolpost fitting. - Fits all lathes with a 1' Toolpost fitting - Special curved design makes...
£63.99
Toolpost RestToolpost Rest
Toolpost Rest TOOLPREST
Fits most mini lathe Toolslides. This is part of the modular NOVA Tool Rest System, a flexible system which allows you to mix and match your Toolrest Posts and Supports to create the perfect Toolrest for your needs. Requires one of the NOVA Tool Rest Bars (additional purchase) The 5/8 inch shaft and is 3-1/4 inch/196mm long, can fit to most Mini Lathe Toolside shafts. This threaded post enables you...
from £11.49

Modular Tool Rest BarModular Tool Rest Bar
Modular Tool Rest Bar TOOLREST
The NOVA Modular Tool Rest System is a flexible system which allows you to mix and match your tool rest posts and supports to create the perfect tool rest for your needs.Woodturning Tool Rest Bar - Perfect for most mini lathes or when you want more precise tool control for smaller work on your larger lathe. Made from cast steel with a stainless steel top rod for durability and smooth operation. Available...
from £21.99
Stand for JET 1221VS Lathe
New
Stand for JET 1221VS Lathe 719202A
Legstand for JET 1221VS Lathe Easy to assemble. Download the instructions by clicking the link near the 'Add the Basket' button.
£418.00

Coronet Herald Tubular Leg Stand
Sale
Coronet Herald Tubular Leg Stand 16015
Tubular leg stand for the Coronet Herald.
Was £142.99 Now £129.99
Coronet Herald Outrigger
Coronet Herald Outrigger 16013
Cast iron outrigger To fit the Coronet Herald.
£54.99

Coronet Herald Bench Feet
Sale
Coronet Herald Bench Feet 16012
To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand.
Was £82.49 Now £74.99
Cast Iron Bed Extension for Coronet Herald
Sale
Cast Iron Bed Extension for Coronet Herald 16011
Adds 400 mm extra capacity between centres to the Coronet Herald lathe.
Was £197.99 Now £179.99

Bed Extension For DML320
Bed Extension For DML320 DML320-E
A 20inch Cast bed extension for the Record Power DML320 Midi Lathe.
£137.49
Adjustable Stand For DML320
Adjustable Stand For DML320 DML305A
The height of this stand is adjustable to suit any user and is suitable for the DML305 and DML305-VS lathes.
£131.95

Tool Rest for DML305
Tool Rest for DML305 DMLTR
Tool Rest For DML305 & Early CL3/4 (3/4" stem)
from £18.69
Long Hole Boring Kit with Auger
Long Hole Boring Kit with Auger CWA131
The perfect tool for making long, uniform apertures through workpieces on the lathe. Ideal for lampstands, as the hole bored is 5/16”, to accept standard bulb holders.
£49.99

Mt2 To Mt1 Sleeve
Mt2 To Mt1 Sleeve MT1-MT2
Morse taper sleeve 2MT - 1MT
£9.99
1/2" Keyed Chuck no arbor
1/2" Keyed Chuck no arbor DC304
A standard drill chuck with 1/32" - 1/2" capacity. This chuck uses a morse taper abor to fit it to your machine. You will need a 1MT or 2MT. You can find them on our website under reference A604 (1MT) or A610 (2MT)
£10.95

ArborArbor
Arbor ARBOR
Morse taper arbor to suit keyed and keyless chucks as used on many pillar drills and lathes. The arbor has a JT33 taper to accept the chuck.
£4.00
Drive Centre
Drive Centre DRIVECENTR
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £13.90

Slim Deluxe Rotating Centre
Slim Deluxe Rotating Centre SDRC
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race.
£45.50
Standard Rotating Centre
Standard Rotating Centre SRCMT
Standard Duty Rotating Centre. 31mm dia. head with 60 deg. point. Excellent general purpose centre. Twin deep groove ball races.
£29.95

60 Degree Point Live Centre60 Degree Point Live Centre
60 Degree Point Live Centre LCMT
Standard Duty Rotating Centre with 60 degree point. Excellent general purpose centre. Available in two sizes: 1MT 2MT
£14.95
Long Bore Extendable Drilling System
Long Bore Extendable Drilling System LBEDS
Long Bore Extendable Drilling System is the ideal solution for boring a starting hole in your hollow form work peice. This system consists of three steel rods. The 3/4' diameter stee lrods are extremely rigid which perfomrs muc hbetter than standard smaller diameter single rods when drilling on a lathe. This system easily mounts into the tailstock on your lathe without the need for a drill chuck...
£16.75

Long Bore ExtensionLong Bore Extension
Long Bore Extension LBEDS
Long Bore Extendable Drilling System
from £6.95