Sort By
Per Page
View
Grid
List
Robert Sorby Five Piece Bevel Edge Chisel Ash Handle Set
5169
Five Piece Bevel Edge Chisel Ash Handle Set (E1695ST)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby Five Piece Gilt Edge Chisel Soft Grip Handle Set
5500
Five Piece Gilt Edge Chisel Soft Grip Handle Set (E5005ST)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworkers toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes. Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails.
Not...
Robert Sorby Five Piece Gilt Edge Chisel with Satinwood Handle Set
E5105ST
Five Piece Gilt Edge Chisel with Satinwood Handle Set (E5105ST)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts,...
Six Piece High Impact Bevel Edge Wood Chisel Set
TRTT-BEWC6BCE
High Impact Through Tang Bevel Edge Wood Chisels
Premium Chrome Vanadium steel for superior sharpness and edge retention. Fully forged steel core to better transfer energy from handle to blade. High impact resistant strike cap to withstand hammer impacts.
Through tang for strength and durability
High impact resistant steel striking cap
Ergonomic soft feel handle
Hardened & tempered...
Robert Sorby Five Piece Tapered Bolster and Ferrule Bevel Edge Chisel Set
E5305ST
Five Piece Tapered Bolster and Ferrule Bevel Edge Chisel Set (E5305ST)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are...
Robert Sorby Slick
289
Slick (F289)
This heavy duty timber framers and boat builders slick has an offset blade to allow for clearance when working deep sockets and mortises, also used as a heavy duty paring chisel with no limits to reach due to it's cranked neck.
Made from a special carbon alloy steel for a perfect combination of hardness and toughness. This ensures a razor sharp edge with outstanding edge retention.
This...
Robert Sorby Satinwood Handled Gilt Edge Chisel
F51006B
Satinwood Handled Gilt Edge Chisel (F510)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails.
Not...
Robert Sorby Cabinet Scraper
K1600XX
Cabinet Scraper (K1600)
A popular addition to any discerning cabinet maker's tool kit, these hand held scrapers smooth down rough edges quickly and easily.
Made from the best quality carbon steel the simple design of these tools belies their incredible effectiveness and designed to finish flat surfaces to the very highest standard.
Available in three sizes:
4 x 2"
5 x...
Robert Sorby Five Piece Bevel Edge Satinwood Set in Wooden Box
E1665DBS
Five Piece Bevel Edge Satinwood Set in Wooden Box (E1665DBS)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts,...
Robert Sorby Chisel Edge Guard
F285EG25
Chisel Edge Guard (F285EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 1", 1 1/2" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
Robert Sorby Slick Edge Guard
289E
Slick Edge Guard (F289EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 60mm and 85mm, these tough leather guards are a snug fit for the Slicks (289)
Robert Sorby Bevel Edge Chisel with Satinwood Handle
F16603H
Bevel Edge Chisel with Satinwood Handle (F166)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails.
Not...
Robert Sorby Bevel Edge Chisel with Octagonal Satinwood Handle
F16703X
Bevel Edge Chisel with Octagonal Satinwood Handle (F167)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like...
Robert Sorby Traditional Bolster & Ferrule Chisel
F16906A
Traditional Bolster & Ferrule Chisel (F169)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby Paring Chisel with Satinwood Handle
241
Paring Chisel with Satinwood Handle (F241)
Traditionally used by cabinet- and pattern-makers for shaving thin slivers of wood.
These paring chisels feature a long, flat, thin blade which tapers towards the cutting edge to give the finest of cuts when cleaning out grooves.
Normally used for hand paring with one hand on the handle and the other controlling blade.
Bevels on the top face enable...
Robert Sorby Registered Firmer Chisel
284
Thicker than conventional firmer chisels, registered chisels have the inherent strength to chop and lever out waste wood. Tapered from the shoulder to the cutting edge to give additional strength. Also suitable for less rigorous framing applications.
Robert Sorby Heavy Duty Framing Chisel
285
Heavy Duty Framing Chisel (285)
Long (10.1/2"), thick blade designed for large framing work when working with deep mortices where extra strength is required.
Blade tapers along its length.
The Heavy Duty Registered Chisel is fitted with ash handle.
Made with high quality High Speed Steel.
Available in 3 sizes.
Overall length 19.5"
Robert Sorby Slick Holster
289H
Slick Holster (F289H)
Purpose made leather holster for the Robert Sorby Slick (289).
The holster is especially useful when working outdoors.
Robert Sorby Sash Mortice Chisel
331
Sash Mortice Chisel (F331)
Traditional design.
Heavy section makes it ideal for levering out waste wood from deep mortice for tenons, locks and hinges.
Special 2 degrees side taper prevents binding in the cut.
Fitted with Satinwood handle.
May be used with light blows from a mallet.
Overall length 11"
Robert Sorby Sash Mortice Chisel with Soft Grip Handle
332
Sash Mortice Chisel with Soft Grip Handle (F332)
Unbreakable plastic handle.
Same rugged specification as the 331 series.
Designed more for on-site work where heavier blows may need to be taken.
Fitted with a robust unbreakable plastic handle.
Overall length 11"
Robert Sorby Corner Chisel
F33310B
Corner Chisel (F33310B)
Designed for squaring up the ends of mortices, grooves or housings.
Faces are precision ground to produce clean, accurate 90 degree angles.
A beautiful tool to use, delicately balanced.
Nowadays often used to clean up after using a router.
Sharpen each face individually using an oil stone.
Fitted with a fine boxwood handle.
Overall length 9.5"
Robert Sorby Gilt Edge Tapered Bolster & Ferrule Chisel
530
Gilt Edge Tapered Bolster & Ferrule Chisel (F530)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby 10" Draw Knife
F56500R
10" Draw Knife (F56500R)
Draw Knives are one of the oldest woodworking tools around and were used in many occupations from Wheelwrighting to Coopering.
In the hands of a skilled craftsman these tools can be used to create massive roughing and shaping cuts or deft finishing cuts. Nowadays they are still used in chair and cricket bat manufacture.
They are also an essential part of any...
Robert Sorby 10" Bent Draw Knife
F56600R
10" Bent Draw Knife (F56600R)
Draw Knives are one of the oldest woodworking tools around and were used in many occupations from Wheelwrighting to Coopering.
In the hands of a skilled craftsman these tools can be used to create massive roughing and shaping cuts or deft finishing cuts.
Nowadays they are still used in chair and cricket bat manufacture.
They are also an essential part...
Flush Cut Saw
PAXF
The Pax flush cutting saw has a flexible alloy steel blade which cuts on the pull stroke. This saw is very suited for cutting dowels etc.
The same high quality and attractively finished walnut handle is standard and is suitable for the highest precision of work. 20tpi as standard, blade length 6".
Special Flexible blade for cutting dowels flush against the surface of wood - no set means...
Jewellers Saw
PAXJ
The Pax jewellers saw has a very thin alloy steel blade with a mirror finish high quality brass back.
The same high quality and attractively finished rosewood handle is standard and suitable for the highest precision work. 20tpi as standard, blade length 6".
For cutting very small pieces of soft metals - the saw has no set on the teeth
Walnut Handle with Brass Ferrule
Mirror Polished...
Razor Saw
PAXR
The Pax Razor Saw is made to the same specification as the jewellers saw but has 40tpi with a 6" blade.
It is suitable for high precision work and will give an excellent finish.
Walnut Handle with Brass Ferrule
Mirror Polished Brass Back
Etched with PAX logo
Robert Sorby Five Piece Bevel Edge Satinwood Chisel Set
E1665ST
Five Piece Bevel Edge Satinwood Chisel Set (E1665ST)
Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworker's toolkit.
They can be used either free-hand making a gentle paring cut or with light mallet strokes.
Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails.
Not...
Robert Sorby Heavy Duty Bevel Edge Framing Chisel
286
Heavy Duty Bevel Edge Framing Chisel (F286)
A large framing chisel. Designed to handle the rigours of deep heavy duty work.
Side bevel enables under-cutting.
Similar to the 285 Framing Chisel but with a bevel to give extra clearance in the cut.
Tapered along the length.
Fitted with a heavy duty Ash handle.
Overall length 15.5"
6" - Gents Saw
PAXG
The perfect partner to the PAX quality hand and tenon saw, this saw has an alloy steel blade with a mirror finish, high quality, brass back and an attractively finished rosewood handle as standard.20tpi
Robert Sorby Heavy Duty Corner Chisel
28725
Heavy Duty Corner Chisel (F28725L)
The Robert Sorby Heavy Duty Corner Chisel is also known as a ‘bruzz’ this rugged chisel will withstand the most demanding applications.
Heavy duty version of the popular cabinet makers corner chisel.
Milled from a solid 1" section it is designed for cleaning up corners in timber framing projects.
Sharpen each face individually using an...
10" Traditional Professional Tenon Saw
TR5410Y
Spear & Jackson Traditional Professional Woodworking Tenon Saw 10" x 13pts
The Spear & Jackson Traditional Professional Tenon Saw is used for joint cutting & sawing small pieces of wood
Universal teeth for general use, cuts along and across the grain
Precision cross ground teeth for extra sharpness
Solid brass back for maximum rigidity
Comfortable wooden handle secured...
Traditional Skew Back Saw 22" x 10pts
TR9500R
Spear & Jackson 22" (559mm) x 10pts Traditional Skew Back Saw
A general purpose saw for use along and across the grain.
22" (559mm) harden and tempered carbon steel blade
10 PPI Resharpenable teeth
Precision cross ground
Riveted wooden handle
Fast cut - rapid, clean cutting action
Skew back for balance and reduced friction
Ideal for cutting planed wood, architraves,...
12" Traditional Brass Back Tenon Saw
TR9550B
Spear & Jackson Traditional Brass Back Woodworking Saw 12" x 15pts
This Traditional Brass Back Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials.
Universal teeth for general use, cuts along and across the grain
Brass back for maximum rigidity
Comfortable, strong wooden handle securely fixed by rivets
High carbon steel blade
...
Carpenters Sliding Bevel
TRCSB
Spear & Jackson Carpenters Sliding Bevel
Carpenters Sliding Bevel. Rosewood Stained Hardwood with Brass Top and Bottom end plates.
Hardwood stock
Brass top and bottom end plates
Spring steel blade
Available in 7.5", 9" or 10" inch
Robert Sorby 12" Traditional Tenon Saw
TS1213
Robert Sorby 12″ Traditional Tenon Saw
Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade,...
Carpenters Marking Gauge
TRCMKG
Spear & Jackson Carpenter's Marking Gauge 8"
Rosewood Stained Hardwood with two brass plates on the working face, round brass bar through top section & brass lock screw on top.
Block size: 66 x 55 x 28 ± 1mm
Brass Plates in Block: 7 x 3mm
Brass Bar in Block: 12mm diameter
Hardwood stock and beam
Brass wear plates and locking screw
Internal brass thread
Carpenters Smoothing Plane
TRCSP
Spear & Jackson Carpenter's Smoothing Plane.
Ideal for cabinet work and general joinery.
Cast iron body
Precision milled base and faces
45mm or 50mm wide high carbon steel blade options available
Robert Sorby 22” Traditional Sorby Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
Robert Sorby 8" Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
5" Draw Knife
KN16
This Draw Knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape.
A leather sheath is included to help protect your cutting edge.
Carpenters Jack Plane
TRCJP5
Spear & Jackson No. 5 Carpenters Jack Plane
No. 5 Jack Plane. Ideal for the initial preparation of rough timber.
Cast iron body
Precision milled base and faces
50mm wide high carbon steel blade
Brass adjusting screw
3" Draw Knife
KN25
This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. It fits nicely into your tool box. A leather sheath is included to help protect your cutting edge.
Four Piece Carpenters Tool Set
TRCT4PS
Four Piece Carpenter's Tool Set
A carpenter's tool set featuring a sliding bevel, carpenter's try square, mortice gauge and smoothing plane.
Hardwood handles
Brass fittings
Spring steel handles
Tools included in the set
9"/230mm Sliding Bevel
9"/230mm Carpenters Set Square
8"/200mm Mortice Gauge
No.4 Smoothing Plane
106mm Draw Knife
MOR220
The Mora Classic Wood Splitting knife has been developed by Mora of Sweden for over a century, and has been utilized by generations of carpenters and wood carvers. The tradition can be explained by the knives being pleasant to work with and having just the right feel. For carving tools and utensils and making firewood this is a great addition to any kit
Traditional Skew Back Saw 24" x 7pts
TR9515K
Spear & Jackson Traditional Skew Back Saw 24" x 7pts
A coarser cutting saw for use along and across the grain.
24" (610mm) harden and tempered carbon steel blade
7 PPI Resharpenable teeth
Precision cross ground
Riveted wooden handle
Fast cut - rapid, clean cutting action
Skew back for balance and reduced friction
Ideal for cutting all rough sawn timber
Comfortable...
1" Mini-Draw Knife
KN17
This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The shank allows the cutting angle to be changed easily for contoured cuts.
Predator Tenon Saw 10" x 15pts
TRB9810
Spear & Jackson Predator 10" (254mm) x 15pts Tenon Saw
A fine cutting saw for use along and across the grain.
10" (254mm) harden and tempered carbon steel blade
15 PPI Hard Pointed teeth
High Impact Polystyrene handle
Soft feel non-slip grip
Fine cut - smooth, clean cutting action
Solid steel back for maximum rigidity
Ideal for tenon joints, mouldings, dowelling,...