Thin Tapered BladeThin Tapered Blade
Thin Tapered Blade MOR106C
This is an alternative woodcarving knife, great for those who want to start carving. With a barrel-shaped, oiled Scandinavian birch wood handle and an approximately 2.5 mm thick and 82 mm long, tapered carbon steel blade.
£21.90
Carving Knife CarbonCarving Knife Carbon
New
Carving Knife Carbon MOR120C
This is an alternative woodcarving knife, great for those who want to start carving. With a barrel-shaped, oiled Scandinavian birch wood handle and an approximately 2.5 mm thick and 60 mm long, tapered carbon steel blade.
£19.92

Double Edge Hook Knife with Leather SheathDouble Edge Hook Knife with Leather Sheath
Double Edge Hook Knife with Leather Sheath MOR162P
This knife has a double-edged stainless steel blade so that you can use it for both pull and push carving. This blade has a narrow curve. We have optimized the blade to make it run smooth over the inside of the spoon or bowl. Improved edge bevels complete the blade and give you the optimum carving experience. To protect both you and the knife it comes with a simple but ingeniously designed edge protection...
£29.94
25mm Double Edge Hook Knife
25mm Double Edge Hook Knife MOR163
A knife with a double-edged stainless steel blade, for both pull and push carving. This blade has a more open curve. Perfect for making a clean cut surface or bowls with large radius. We have optimised the blade to make it run smooth over the inside of the spoon or bowl. Improved edge bevels complete the blade and give it the optimum carving experience. To protect both you and the knife...
£29.94

Right-Handed Hook Knife
Right-Handed Hook Knife MOR164
Right Handed Mora Woodcarving Hook This knife has a single-edged stainless steel blade for right hand use. The back of the knife is not sharp which gives you the possibility to use your left hand to push the blade with your fingers from the back. This blade has a narrow curve. The Mora crook knife 164 is a specialist hook knife for spoon and bowl carving. It has an oiled birch wood handle...
£23.94
Left-Handed Hook Knife
Left-Handed Hook Knife MOR164-L
Left Handed Mora Woodcarving Hook This knife has a single-edged stainless steel blade for right hand use. The back of the knife is not sharp which gives you the possibility to use your left hand to push the blade with your fingers from the back. This blade has a narrow curve. The Mora crook knife 164 is a specialist hook knife for spoon and bowl carving. It has an oiled birch wood handle...
£23.94

106mm Draw Knife
106mm Draw Knife MOR220
The Mora Classic Wood Splitting knife has been developed by Mora of Sweden for over a century, and has been utilized by generations of carpenters and wood carvers. The tradition can be explained by the knives being pleasant to work with and having just the right feel. For carving tools and utensils and making firewood this is a great addition to any kit
£30.96
Skew Knife
Skew Knife KN11
Carving Knives with long lasting Flexcut razor edge. The comfortable carved handle allows for long periods of carving without hand fatigue.
£29.49

Cutting Knife
Cutting Knife KN12
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN12 Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. A great beginners knife, 28mm blade length. The comfortable carved handle allows for long periods of carving without fatigue.
£32.49
Detail Knife
Detail Knife KN13
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN13 Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 38mm blade can accommodate larger stock removal if needed. The comfortable carved handle allows for long periods of carving without fatigue.
£32.49

Roughing Knife
Roughing Knife KN14
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. It features a straight 2" blade for heavier stock removal, with a rounded durable point.
£33.98
Chip Carving Knife
Chip Carving Knife KN15
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. This traditional chip carving knife is honed, polished and ready to carve. The comfortable carved handle allows for long periods of carving without fatigue.
£31.47

5" Draw Knife
5" Draw Knife KN16
This Draw Knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. A leather sheath is included to help protect your cutting edge.
£63.48
Pelican Knife
Pelican Knife KN18
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. The curved 1.5/8" blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
£36.58

Mini-Pelican Knife
Mini-Pelican Knife KN19
KN19 Mini Pelican Knife. The mini-pelican knives offer the same features as their larger brother (KN18) only with a 22mm ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions. The Flexcut Mini-Pelican Knife has a curved, ultra-thin blade that offers a clean...
£37.47
Mini Chip Carving Knife
Mini Chip Carving Knife KN20
KN20 Mini Chip Knife. The mini-chip carving knife has a 16mm ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
£30.98

5mm Scorp5mm Scorp
5mm Scorp KNL22
KN22 3/16" (5mm) Right-Handed Scorp KNL22 3/16" (5mm) Left-Handed Scorp Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself....
£34.47
8mm Scorp8mm Scorp
8mm Scorp KN23
KN23 5/16" (8mm) Right-Handed Scorp KNL23 5/16" (8mm) Left-Handed Scorp Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Left-Handed carvers should choose a left-handed tool to cut towards yourself....
from £34.47

3" Draw Knife
3" Draw Knife KN25
This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. It fits nicely into your tool box. A leather sheath is included to help protect your cutting edge.
£57.98
Mini Detail KnifeMini Detail Knife
Mini Detail Knife KN27
The Mini Detail Knife has the smallest 19mm straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
£38.98

Flexcut Hip Knife
Flexcut Hip Knife KN30
The Flexcut Hip Knife is a versatile fine cutting tool that is capable of a wide range of woodcarving projects. Its high-carbon steel blade is precision machined and honed ready for use. The knife is supplied in a real leather sheath that easily attaches to your belt. Key Features A very versatile cutting knife from Flexcut Flexcut tools are supplied honed and ready for use Supplied with...
£49.99
Flexcut Pocket Jack 2.0
New
Flexcut Pocket Jack 2.0 JKN289
The Flexcut Pocket Jack 2.0 is a more compact version of the Carvin’ Jack 2.0. The Carvin’ Jack’s neat pocket sized multi-tool design is perfect for carving wherever and whenever inspiration strikes. It features four highly useful blades: a Detail knife, a Straight gouge, a Scorp and a V-Scorp. Pocket Jack 2.0 features a comfortable contoured aerospace aluminium body, cross hatched...
£116.98

Flexcut Spoon Carvin' Jack 2.0
New
Flexcut Spoon Carvin' Jack 2.0 JKN296
Carve a spoon, anywhere, anytime. With Flexcut’s Spoon Carvin’ Jack 2.0 in your pocket you are ready whenever an opportunity presents itself. Flexcut’s Spoon Carvin’ Jack 2.0 is neat and compact when fully closed. Within the body lie four razor sharp blades. The Spoon Carvin’ Jack 2.0 features a variable radius (9.5mm to 12.7mm) Hook Knife, a 19mm radius Hook Knife, a...
£162.58
1" Mini-Draw Knife
1" Mini-Draw Knife KN17
This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The shank allows the cutting angle to be changed easily for contoured cuts.
£33.48

Hook KnifeHook Knife
Hook Knife HOOKKNIFE
The Flexcut Hook Knife blade is curved, similar to a gouge, for working in hollows with ease and fast stock removal. Right-Handed carvers should choose a right-handed tool to cut towards yourself. Choose a left-handed tool to cut away from yourself. Blade Bevel Length: 7/8"
from £34.47
3mm Left-Handed Scorp
3mm Left-Handed Scorp KNL21
KNL21 1/8" (3mm) Left-Handed Scorp Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Left-Handed carvers should choose a left-handed tool to cut towards yourself. Choose a right-handed tool to cut away from...
£35.59