130mm Faceplate Ring
130mm Faceplate Ring 6002
Strong and fast mounting method for bowl blanks Secure mounting of a faceplate with the quick convenience and power of a chuck Strong even with irregular sized wood and rough cut surfaces 2" size to fit the 4" NOVA Chuck Accessory Jaws
£65.99
SuperNOVA 2 Chuck Key
SuperNOVA 2 Chuck Key 13006
Replacement handle for SuperNOVA2 and/or Titan Chuck.
£19.63

NOVA Chuck Insert
NOVA Chuck Insert NOVAI
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded). The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
Patriot Chuck Insert
Patriot Chuck Insert INSERT
This chuck insert system allows the Patriot chuck to be fitted to almost every lathe.
£23.50

10 in 1 Chuck Gauge
10 in 1 Chuck Gauge 10051
NOVA 10051 Complete Workshop 10 in 1 Gauge is an accessory for NOVA Chucks and the general workshop. This handy gauge is exclusive to the NOVA Chuck range. Quickly and easily work out your dovetails accurately. If you use a chuck, this is an essential accessory. In addition, this useful gauge also comes with a variety of common measurement and gauging functions used in the wider workshop; angle checker...
£14.99
NOVA Dovetail Chisel
NOVA Dovetail Chisel 6008
Accessory for NOVA Chucks to quickly and accurately make the dovetail recess for the chucking of a bowl. Ensures a dovetail with a sharp, clean edge to precisely match to the dovetail contour of NOVA Accessory Jaws. Creates maximum holding power to your NOVA Chuck. Scaled with a handy mark out scale for use as a guide.
£29.99

Jawslide #4
Jawslide #4 23054
Replacement Jaw Slide #4 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35
Jawslide #1
Jawslide #1 23051
Replacement Jaw Slide #1 for NOVA G3 and SuperNOVA2 chucks. Precision die cast.
£9.35

Jawslide #2
Jawslide #2 23052
Replacement Jaw Slide #2 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35
Jawslide #3
Jawslide #3 23053
Replacement Jaw Slide #3 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35

SAFELOCK Woodworm Screw for Cole Jaws
SAFELOCK Woodworm Screw for Cole Jaws WWCJ
This Woodworm screw fits into the NOVA Cole jaws. It is longer than the standard screw to allow it to protrude sufficiently beyond the jaw. The major advantage is the support the Cole jaws offer to the back of the blank, especially when turning larger diameter blanks. The strong thin edged thread form cuts into wood for maximum holding power. The threads are 2mm deep with a 7mm diameter core. The...
£14.99
Spare Jaw Screw Set
Spare Jaw Screw Set NOVA-SSK
Accessory fastening spares kit for the NOVA chucks. Come standard with NOVA Chucks. Contains 8 M6 Screws. Handy spares pack to have on hand in the event of fasteners going missing.
£2.99

Universal Spanner
Universal Spanner 23079
NOVA 23079 Universal Chuck Spanner Accessory is a handy NOVA Chuck Accessory. Fits all NOVA Chucks to quickly and easily loosen the chuck and chuck insert/adaptors from your lathe spindle. Features over 4 different NOVA specific functions in the one tool. - Ideal for removing your NOVA chuck insert/adaptors from your lathe - Handy NOVA Chuck essential tool - Solid steel for long life - Fits all NOVA...
£14.99
Steel Faceplate Ring
Steel Faceplate Ring CWA
Steel Faceplate Ring
from £25.29

100mm Faceplate Ring
100mm Faceplate Ring 6001
Strong and fast mounting method for bowl blanks - Secure mounting of a faceplate with the quick convenience and power of a chuck - Strong even with irregular sized wood and rough cut surfaces - 4' size to fit the 4' NOVA Chuck Accessory Jaws
£24.99
Cole Jaw Buffer Accessory KitCole Jaw Buffer Accessory Kit
Cole Jaw Buffer Accessory Kit 6030
Accessory for the NOVA JSCOLE Cole Jaw Set and the NOVA 6006 Mini Cole Chuck Jaw Set. This kit contains 8 multi-sided buffers and 8 long pin buffers to enable you to hold a variety of projects in your NOVA Cole Jaws and Mini Cole Jaws. - 8 multi-sided buffers, 8 long pin buffers (4 sided buffers and a long pin buffers). - Exclusive for the NOVA Cole and Mini Cole Jaws. - These 2 sets cover a majority...
£19.99

Cole Jaw Fastening Kit
Cole Jaw Fastening Kit NOVA-CJFK
Cole Jaw Fastening Spares. Contains 2 different designs in each kit ? a 4 sided buffer and a long pin buffer. Package only.
£9.99
Chuck Exert
Chuck Exert NEX
To enable Patriot chucks with a standard thread to fit large spindle lathes.
£44.25

Set of Screws & Rubbers
Set of Screws & Rubbers RSJBRSSK
Robert Sorby Bowl Reversing Jaws Spare Screw Kit
£9.25
Faceplate RingFaceplate Ring
Faceplate Ring FACERING
Designed with an internal dovetail to fit securely on to the standard 2' (50m) jaws.These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting.Available with an outer diameter of 3 1/8' (80mm) and 4 3/4' (120mm).
from £20.25

Patriot Screw
Patriot Screw RSPS
Parallel thread for extra grip, fits directly into 50mm jaws.Also fits all Nova chucks.
£14.19
Patriot Chuck Drive Centre
Patriot Chuck Drive Centre RSPDC
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
£19.25

Steb DriveSteb Drive
Steb Drive STBCHUCK
The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.
from £49.75
Spindle Extender
Spindle Extender TMIA86
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary. Each extender includes two No Lock
£46.95

33 x 3.5 - Spindle Extender
33 x 3.5 - Spindle Extender A863
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock. 33mm
£46.95
Adapter 1 x 8 Female To 1 1/4" x 8 Male
Adapter 1 x 8 Female To 1 1/4" x 8 Male A864
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1" x 8tpi F to 1 1/4" x 8tpi M
£40.95

Spindle Adaptor 1.25-8 F 1 x 8 M
Spindle Adaptor 1.25-8 F 1 x 8 M A866
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1 1/4' x 8tpi F to 1' x 8tpi M
£40.95
Adapter 1 1/4" x 8 Female To 33mm Male
Adapter 1 1/4" x 8 Female To 33mm Male A867
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1 1/4" x 8tpi F to 33mm M
£40.95

Spindle Adaptor 33M F 1.25 x 8 M
Spindle Adaptor 33M F 1.25 x 8 M A869
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 33i F to 1 1/4' x 8 M
£40.95
Chuck Reversing Adapter
Chuck Reversing Adapter A87
This chuck reversing adapter features a 2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck.Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock.By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly...
£25.95

G3 Chuck Key
G3 Chuck Key 48203
Replacement handle for the NOVA G3 Chuck. Solid steel with cast pinion.
£19.30
50mm Faceplate Ring
50mm Faceplate Ring 6000
Strong and fast mounting method for bowl blanks Secure mounting of a faceplate with the quick convenience and power of a chuck Strong even with irregular sized wood and rough cut surfaces 2" size to fit the 4" NOVA Chuck Accessory Jaws
£19.99

Adaptor M33 x 3.5 Female To 1" x 8tpi Male
Adaptor M33 x 3.5 Female To 1" x 8tpi Male A868
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two. No Lock Spindle Washers
£40.95