NOVA Cole Jaw Extension 15" Version
NOVA Cole Jaw Extension 15" Version 6039
An exclusive accessory for the new large 12" Cole Jaws, add these to extend your Cole Jaws to 15"/381mm diameter. Easy to attach to your NOVA 12" Cole Jaws. Precision Die Cast All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes Same jaw fixing system across all Standard NOVA Chuck models (except Quick Change), giving you maximum system...
£39.99
NOVA Long Nose JawsNOVA Long Nose Jaws
NOVA Long Nose Jaws 6017
Made from K1045 steel for maximum structural strength. - Only NOVA chucks give you the same jaw fixing system and same insert/adapter system across all standard chuck models, giving you optimal flexibility. - NOVA chucks are specially designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength. - Special NOVA dovetail profile, designed to maximum...
£46.99

NOVA Pin Jaws
NOVA Pin Jaws JSPIN
Longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins - Acts like a pin chuck, expanding into a pre-bored hole. Perfect for free form edge bowls - These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge - A big advantage over pin chucks is...
£39.99
NOVA Soft Grip Jaws
NOVA Soft Grip Jaws 6021
NOVA 6021 Soft Chuck Accessory Jaw Set an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. - 4 segments of soft nylon - Cut and customize yourself to your specific holding requirements - Markless holding - Thick jaw body give maximum flexibility of design - Uses standard fasteners supplied with your NOVA Chuck...
£16.99

Jawslide #1
Jawslide #1 23051
Replacement Jaw Slide #1 for NOVA G3 and SuperNOVA2 chucks. Precision die cast.
£9.35
Jawslide #2
Jawslide #2 23052
Replacement Jaw Slide #2 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35

Jawslide #3
Jawslide #3 23053
Replacement Jaw Slide #3 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35
Jawslide #4
Jawslide #4 23054
Replacement Jaw Slide #4 for NOVA G3 and SuperNOVA2 Chucks. Precision die cast.
£9.35

SAFELOCK Woodworm Screw for Cole Jaws
SAFELOCK Woodworm Screw for Cole Jaws WWCJ
This Woodworm screw fits into the NOVA Cole jaws. It is longer than the standard screw to allow it to protrude sufficiently beyond the jaw. The major advantage is the support the Cole jaws offer to the back of the blank, especially when turning larger diameter blanks. The strong thin edged thread form cuts into wood for maximum holding power. The threads are 2mm deep with a 7mm diameter core. The...
£14.99
Spare Jaw Screw Set
Spare Jaw Screw Set NOVA-SSK
Accessory fastening spares kit for the NOVA chucks. Come standard with NOVA Chucks. Contains 8 M6 Screws. Handy spares pack to have on hand in the event of fasteners going missing.
£2.99

Titan III 5.75" Deep Grip JawTitan III 5.75" Deep Grip Jaw
Titan III 5.75" Deep Grip Jaw 13040
Titan III jaw Deep Grip Jaw Set - 3 Screw Hole Mount ONLY designed to fit Nova Titan III chuck - Huge 5-3/4' Jaw designed for turning very large work - A great compliment to the 5' Powergrip jaws that come with the Titan III chuck
£49.99
Titan III 6.5" Deep Grip Jaw
Titan III 6.5" Deep Grip Jaw 13041
3 Screw Hole Mount ONLY designed to fit Nova Titan III chuck - Huge 6-1/2' jaw designed for turning very large work - A great compliment to the 5' Powergrip jaws that come with the Titan III chuck
£54.99

NOVA 10" Cole JawsNOVA 10" Cole Jaws
NOVA 10" Cole Jaws JSCOLE
NOVA Cole Accessory Jaw Set is an accessory for NOVA chucks. Designed to expand the range and capacity of your standard NOVA chuck for specific projects and applications. Universally fits to any NOVA chuck* for maximum interchangeability. Duplicate accessories are not needed for different NOVA chucks. Designed for the re-chucking of bowls (to remove chuck marks), add decoration or to reshape the bottoms...
£59.99
Patriot Chuck Zero Jaws
Patriot Chuck Zero Jaws RSJZ
Zero Jaws will close down to 4mm minimum making them ideal for turning fine or delicate projects.They are a must for those specialising in miniature work.The dome shape is incorporated in the design to enable work very close to the project.It also allows internal holding of larger projects without the fear of marking the wood.
£72.25

Patriot Chuck Jaws 1"
Patriot Chuck Jaws 1" RSJ1
With a fine internal and external dovetail, these jaws are perfect for fine intricate or miniature projects.
£45.50
NOVA 100mm Jaws
NOVA 100mm Jaws JS100N
Designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. The NOVA JS100N is one of the most popular chuck accessories to mount 12-14″ bowls. Mount customized false wooden jaws and the customized jaws can be made for special purposes. They are built with a turning dovetail profile to maximize strength without jeopardizing wood fibers, and can...
£44.99

Patriot Chuck 1" Pin Jaws
Patriot Chuck 1" Pin Jaws RSJP
These Pin Jaws have a multitude of uses.Ideal for small projects utilising the fine internal and external dovetail.The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.
£60.75
NOVA 20mm Mini Jaws
NOVA 20mm Mini Jaws JS20N
The NOVA Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1″) jaws. They are designed to securely hold small bowls up to 6″ in diameter, and small, free-end spigot turnings up to 5″ long. They can be used in expansion mode for bowls, or in contraction mode for spigots. Made from K1045 medium tensile carbon steel...
£34.99

Patriot Chuck Jaws 1.3/8"
Patriot Chuck Jaws 1.3/8" RSJ15
Designed for smaller projects such as boxes and bowls up to 6' diameter.
£49.95
NOVA 12" Large Cole Jaws
NOVA 12" Large Cole Jaws 6040
NOVA Large Cole Jaw Set has 120"/304mm bowl diameter capacity. An accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications. Please note: Due to sizing, only the SuperNOVA2 and Titan chucks are compatible with these jaws. NOVA 6040 Large Cole Jaw Set is a versatile set, designed for the re-chucking of bowls to remove...
£69.99

Patriot Chuck Jaws 2.3/4"
Patriot Chuck Jaws 2.3/4" RSJ3
For bigger bowls and projects up to 13' diameter that need a little more substantial hold.
£66.95
NOVA 25mm JawsNOVA 25mm Jaws
NOVA 25mm Jaws JS25N
The 25mm jaw-set substitutes for the standard 50mm jaws for use on small work with 3/8″-1-1/4″ spigots, as a type of pin chuck with 1″ capacity, for expanding dovetail work on bowls up to 6″ diameter, and for 1/2″-1″ square blanks. This set is for small bowls and unsupported small spigot turning and is ideal for small bench-top lathe work. Features a special NOVA...
£34.99

Patriot Chuck Jaws 3.1/2"
Patriot Chuck Jaws 3.1/2" RSJ4
These jaws allow for even bigger bowls up to 16' diameter to be held securely.
£69.75
NOVA 28mm Mini Step Jaws
NOVA 28mm Mini Step Jaws 6025
The NOVA 6025 Mini Step Chuck Accessory Jaw has three step sizes providing optimum gripping of 3 base sizes with minimal crush damage to wood. The internal has a spigot grip for small unsupported or supported spindle work. Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres. Precisely machined from a single solid piece of 1045...
£39.99

NOVA 35mm Bowl Jaws
NOVA 35mm Bowl Jaws 6019
Fits perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm Accessory Jaws. - Made from K1045 steel for maximum structural strength. - The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws. EXPANDING GRIP 37.9mm (1.49?) ? 59mm (2.32?) CONTRACTING GRIP Square: 29mm (1.14?) ? 7.9mm (.31?) Spigot: 31mm (1.22?) ? 9.9mm...
£29.99
Patriot Chuck Long Nose Jaws
Patriot Chuck Long Nose Jaws RSJLN
Rough turned bowls can be remounted internally with the reach of almost 4' of these jaws.Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2' away from the chuck body.
£86.25

Patriot Chuck Jaws 4.1/4"
Patriot Chuck Jaws 4.1/4" RSJ5
Large bowls and platters over 16' diameter can be turned due to the much bigger spigot or recess this set of jaws allows.
£72.25
NOVA 35mm Spigot JawsNOVA 35mm Spigot Jaws
NOVA 35mm Spigot Jaws JS-SP35
For work where a long overhang is needed or hollowing into end grain, these NOVA 35mm Spigot Jaws provide superior gripping power. Designed for expanded dovetail and reverse dovetail for gripping footed bowls One of the most popular accessories for mounting 12-14" bowls Same jaw fixing system across all NOVA chuck models - total system interchangeability All NOVA chuck accessory jaws...
£42.99

NOVA 45mm Spigot Jaws
NOVA 45mm Spigot Jaws JS-SP45
Designed for expanded dovetail and reverse dovetail for gripping footed bowls - One of the most popular accessories for mounting 12-14' bowls - Same jaw fixing system across all NOVA chuck models ? total system interchangeability - All NOVA chuck accessory jaws are designed to hold in the expansion and contraction modes EXPANDING GRIP 96.8mm (3.81?) ? 118mm (4.64?) CONTRACTING GRIP Square: 77mm...
£47.99
Patriot Chuck Deep Grip Jaws 4.1/4"
Patriot Chuck Deep Grip Jaws 4.1/4" RSJDG
Designed with deep sides to give extra grip on large logs and awkward pieces of wood.They also have a large internal and external dovetail to securely hold large bowls in excess of 16' diameter.
£72.25

Bowl Reversing Jaws
Bowl Reversing Jaws RSJBR
These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl.Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.
£79.75
NOVA 50mm Jaws
NOVA 50mm Jaws JS50N
Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. - All NOVA Chuck accessory jaws are designed to hold in the expansion and contraction modes. - Same jaw fixing system across all NOVA Chuck models ? total system interchangeability. - Versatile jaw. Comes standard with most NOVA Chucks.
£39.99

NOVA 70mm Mini Jaws
NOVA 70mm Mini Jaws JS70N
Perfect for bowl and spigot projects. Expanded dovetail and reverse dovetail holds for gripping footed bowls. - Made from K1045 steel - The standard Woodworm Screw (included with Nova chucks) can be used with these jaws. - Designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength. - Special Nova dovetail profile. Designed for maximum strength...
£39.99
NOVA 75mm Bowl JawsNOVA 75mm Bowl Jaws
NOVA 75mm Bowl Jaws 6014
Perfect for bowl and spigot projects. Designed for expanded dovetail and reverse dovetail holds, for gripping footed bowls. - Made from K1045 steel for maximum structural strength. - The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws. All accessory jaws in the Standard Chuck range will fit all the Standard NOVA (NOVA Infinity Quick Change requires optional accessory...
£49.99

NOVA 75mm Step Jaws
NOVA 75mm Step Jaws JS75DT
With three step sizes providing optimum gripping of 3 base (foot) sizes with minimal crush damage to wood. The optimum step sizes are 1.65', 2', 2.5'. - Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability, maximum structural strength, and long life. - The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws. EXPANDING...
£44.99
Patriot Chuck Pen Jaws
Patriot Chuck Pen Jaws PBDJ
These Jaws will hold your pen blank central so you can drill on the lathe.A groove in both jaws ensure you have a tight secure grip of the pen blank.Mount your drill chuck into your tailstock and simply wind in the drill.With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.These jaws have been designed to fit a Robert...
£35.15

NOVA 8" Mini Cole Jaws
NOVA 8" Mini Cole Jaws 6006
An accessory for NOVA chucks, to expand your range and capacity of your standard NOVA chuck for specific projects and applications. It?s a versatile set, designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls. Universally fits to any NOVA chuck* for maximum flexibility. Duplicate accessories are not needed for different NOVA chucks. Other NOVA...
£39.99
NOVA 76mm Power Grip JawsNOVA 76mm Power Grip Jaws
NOVA 76mm Power Grip Jaws PJSN
The most powerful jaw available for large spigot/hollow turning - Great multipurpose jaw for bowl and hollow form turners - Suitable for NOVA SuperNOVA2 and NOVA Titan Chucks only - Included as standard with all NOVA Titan Chucks EXPANDING GRIP 95mm (3.74?) ? 116mm (4.56?) CONTRACTING GRIP Square: 76mm (2.99?) ? 55mm (2.16?) Spigot: 97.8mm (3.85?) ? 77mm (3.03?)
£39.99

NOVA 130mm JawsNOVA 130mm Jaws
NOVA 130mm Jaws JS130N
The NOVA JS130N 130mm (5″) Chuck Accessory Jaw Set is designed to mount big bowls, up to 29″in diameter. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both...
£46.99