Black Superglue
CA3SB
Creates the look of a natural defect on visible glue joints.
A new take on the Chestnut Products CA Superglue, this is a thick, black glue with all the same properties but ideal for use when the glue line shows. The dried glue imitates the look of a natural flaw in the timber, disguising the join so that it becomes a feature!
Size: 20g
Titebond II Premium Wood Glue
TITEBII
Fully weather proof.Resists solvents, heat and water.May be used on wood, paper, cloth, hardboard, particleboard and most other porous surfaces.
Titebond III Ultimate Wood Glue
TITEBIII
Offers the best possible performance in woodworking glues.This waterproof formula provides a superior bond strength, longer open assembly time and a lower application temperature.The perfect choice for interior and exterior woodworking.
Thin Cyanoacrylate
CA1
When you want to bond two surfaces together quickly and efficiently there’s nothing much that beats a cyanoacrylate superglue.
This is the thin glue, very low viscosity for capillary action when you want the glue to penetrate deep into small cracks. Can also be used to post-assembly to wick into parts. Ideal for use when joining very close fitting parts and smooth, even surfaces. Dries in...
Medium Cyanoacrylate
CA2
When you want to bond two surfaces together quickly and efficiently there’s nothing much that beats a cyanoacrylate superglue.
This is the medium glue, useful for general purpose use, stays where you put it! Takes up to 20 seconds to dry giving you enough time to line everything up. Good for fairly smooth surfaces.
A full cure – and maximum strength – requires 24 hours. Low...
Thick Cyanoacrylate
CA3
When you want to bond two surfaces together quickly and efficiently there’s nothing much that beats a cyanoacrylate superglue.
This is the thick glue, useful for gap filling where you want to seal a crack in your timber, mixed with sawdust if you want. Slower drying, up to 60 seconds when applied thickly.
A full cure – and maximum strength – requires 24 hours. Low temperatures...
Superfast PVA
FPVA1000
Wudcare 5 minute PVA woodworking adhesive provides an initial bond after 5 minutes and a strong bond after 10 minutes.
It is a very versatile glue and is ideal for laminating and veneering.
D3 waterproof makes this ideal for all types of woodworking applications
1000ml
Gorilla Wood Glue
GWG
Gorilla Wood Glue is the adhesive that woodworkers, carpenters and hobbyists trust for their woodworking projects. Gorilla Wood Glue, a PVA glue, offers the benefits of an easy-to use, water-based adhesive, with the holding power Gorilla is known for. This PVA glue is incredibly water resistant and dries a natural colour that offers an invisible bond line for your projects. Directions: For best results,...
Gorilla Glue
GG
Gorilla Glue has devoted following due to its strength, open working time and shelf life.
Gorilla Glue is unaffected by extremes of heat or cold.
100% waterproof.
Expands to 3 times its size during curing.
Bonds wood, metal, stone, foam, glass and much more.
Gorilla Glue Clear
GGC
The crystal-clear glue for virtually invisible fixes.
Easy to use
Crystal clear, non-foaming formula
Incredibly strong and ideal for indoor and outdoor applications
Available in 50ml or 110ml bottle
Gorilla Tape Handy Roll
GTHR
Gorilla Tape Handy Roll - 9 metres
Gorilla Tape is extra strong, double-thick and incredibly tough. Whether you need to stick rough, smooth or uneven surfaces, this is the duct tape with extra grip. Indoors and out, you can use Gorilla Tape where you want.
Rugged all-weather shell withstands the elements
Grips smooth, rough and uneven surfaces
Double-thick adhesive is super strong
Designed...
Titebond Dark Wood Glue
TBD16
Formulated for use with darker woods and suitable for hard and softwood.
Has strong initial 'tack' and is solvent and heat resistant.
16oz
Titebond Original Wood Glue
TITEBORI
Grabs fast, aligns easily and forms a bond stronger than wood. Doesn't soften or gum up when sanding down. Non toxic and non-flammable.
Acrylic Size 60ml
TT-60AS
The Tiny Turner Acrylic Size 60ml
A 60ml bottle of water-based acrylic size perfect for use with the Tiny Turner Chameleon ranges of pigments and flakes. Also suitable for use with metal leaf and gold leaf.
Classed as a 15 minute size, this glue takes approximately 15 minutes to reach tack point after which it remains open (sticky) for around 24 hours.
Apply the pigments/flakes/leaf after...