Odie's Wax

OWAX250 - Odie's Wax 266ml
£81.96

updown

 

You may also need:

Product Description

Odie's Wax

A food safe, solvent free, non-toxic high concentrate wood finish that can be used alone or in conjunction with any combination of other Odie’s Oil finish products. This is a high concentration wax that enhances lustre, protection and durability.

Use on lighter woods or any wood where only minimal colour change with added depth is desired.

Odie’s Wax is great for all the same applications as regular Odie’s Oil: All Interior and exterior wood, boats, bright work, doors, floors, decks, gates, fine furniture, patio furniture, bowls, cutting boards, kitchen implements, toys. The list goes on and on.

Odie’s Wax is great for wood turners and can be used as a friction polish. Ideal for new wood and suitable for use as a re-conditioner for old wood and it has a pleasant fresh citrus aroma. It's so easy to use; No sanding or stripping in between coats is required even for retouching. Wipe on, wait a while and buff off. It’s really easy…

This wax offers impressive coverage – many, many times the area of other wood finishes. Coverage will vary depending on wood density and porosity.

Contains natural UV inhibitors-sunscreen for wood!

Supplied in 266ml (9oz) jars.

Application tips:

  • Do not dilute
  • Calculate how much to use, no need to over apply
  • Work into the surface using a zero grit Scotch-Brite type pad
  • Wait for one to two hours
  • Buff off with a cotton cloth

Customer Reviews

Application Process

Applying Odie’s Oil

  • Stir or mix your jar well (Oil Only) to agitate all the ingredients as they settle over time. 
  • Tools needed: Zero grit Scotch-Brite type (non-woven) pad and clean 100% cotton cloth.
  • Use the fine Scotch-Brite pad to work the product into the wood in the direction of the grain.  The friction from the application helps drive the product into the wood grain. Check your progress, if the surface feels dry, apply more oil, continue until the surface will not absorb any more oil. Only use what is needed, a little Odie’s goes a long way, so don’t overdo it. It can also be used as a friction polish for wood turners.
  • After working the product into the surfaces with the pad, allow it to set for 45 minutes to 2 hours but not longer than 20 hours. You can wait a bit longer but you will find it harder to buff off and residual oil.
  • After waiting for the product to set, use a clean 100% cotton cloth and buff off all the product from your project surfaces.  When your towel is loading up with product switch to a new cloth until the entire surface is buffed off and no product remains. If you can swipe a clean finger across the surface and not leave a mark you are done. 
  • Your piece can be handled almost immediately after buffing; however, we suggest you give it a day or two to cure before use. If you know the piece is going to be exposed to water or liquids, we suggest you give it two weeks to cure for best results.

Additional coats of Odie’s products can be applied using these same easy steps above, we suggest waiting 24 hours between coats.

  •  

Video

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from FREE

check delivery cost

People who bought this also bought...

Abranet Single SheetAbranet Single Sheet
Abranet Single Sheet
from £0.48
Tealight CupTealight Cup
Tealight Cup
£1.32

Sycamore
Sycamore
from £1.45

Ash
Ash
from £2.86