Robert Sorby Patriot Chuck Zero Jaws
RSJZ
Patriot Chuck Zero Jaws
Zero Jaws will close down to 4mm minimum making them ideal for turning fine or delicate projects.
They are a must for those specialising in miniature work.
The dome shape is incorporated in the design to enable work very close to the project.
It also allows internal holding of larger projects without the fear of marking the wood.
Robert Sorby Patriot Wobble Chuck
RSWC
Patriot Wobble Chuck
An inexpensive introduction to off-centre or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring.
The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means.
It is then off-set by rotating the upper section of the Wobble Chuck.
Ideal...
No.2 Turning Tool Handle (700/2)
HTT2
10" Ash Handle for woodturning tools, complete with ferrule and end cap.
Robert Sorby Round Side Scraper
824
Round Side Scraper (824)
Designed for blending the parallel side wall and the curved bottom of vessels and boxes together.
It is excellent for undercutting the rims of small bowls.
Lifetime HSS Guarantee.
Robert Sorby Heavy Duty Full Round Scraper
B8004
Heavy Duty Full Round Scraper (800)
Produced with a massive 1 1/2' x 3/8' (38mm x 10mm) section to absorb vibration and ensure stability making it ideal for long overhangs over the tool rest when producing deep vessels.
Designed for finishing on bowls and platter especially where a smooth curve is required.
Lifetime HSS Guarantee.
Razertip HD Pen Spear Shader
HD5M
Razertip Heavy Duty Fix Tip Pen Spear Shader
Spear shaders are Razertip's most popular shading tip style, useful for most shading techniques, from straight lines to points and inside sharp corners. As with all shaders, the edge can also be used for dark, crisp lines.
A heavy-duty cord is recommended.
Robert Sorby TurnMaster Excelsior Mushroom Cutter
RSTM-GT7
TurnMaster Excelsior Mushroom Cutter (RSTM-GT7)
Titanium Nitride bonded onto quality High Speed Steel, provides the same advantages as HSS whilst enhancing the cutting life of the tool tip.
Use the same traditional sharpening equipment used for HSS.
Sharpens to 0.12-0.2 microns.
Harness of coating up to 85RC.
Material is Titanium Nitride on M2 HSS.
Better used for undercutting small...
Robert Sorby Patriot Chuck 1" Pin Jaws
RSJP
Patriot Chuck 1" Pin Jaws
These Pin Jaws have a multitude of uses.
Ideal for small projects utilising the fine internal and external dovetail.
The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.
Foredom High Speed Micromotor Kit 1/8" Collet
K107018-21
For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewellery making and fine detailing in wood. Kit includes control box, handpiece with 1/8" collet, variable speed foot control, handpiece cradle, spare pair of motor brushes, spare fuse and collet changing wrenches.
Compared to flexible shaft machines, micromotors have less torque, however,...
Set of Screws for Razertip BPH Pen
SCREWSET
Set of Screws for the Razertip BPH Pen
Set of 2 replacement screws for the BPH Interchangeable-tip Pen.
Razertip Writing Tip
T9
Razertip Writing Tip
The original writing tips. They heat fairly quickly, recover their heat well, and are good for general writing, signing, and drawing.
Standard Writing - Yields a line approximately 1/32 - 1/16 inch wide, depending on the heat setting and the material being burned.
Extra Small Writing - This is Ideal for very fine writing and super-miniatures, as well as extremely fine...
Robert Sorby Slick
289
Slick (F289)
This heavy duty timber framers and boat builders slick has an offset blade to allow for clearance when working deep sockets and mortises, also used as a heavy duty paring chisel with no limits to reach due to it's cranked neck.
Made from a special carbon alloy steel for a perfect combination of hardness and toughness. This ensures a razor sharp edge with outstanding edge retention.
This...
Robert Sorby Heavy Duty Bevel Edge Framing Chisel
286
Heavy Duty Bevel Edge Framing Chisel (F286)
A large framing chisel. Designed to handle the rigours of deep heavy duty work.
Side bevel enables under-cutting.
Similar to the 285 Framing Chisel but with a bevel to give extra clearance in the cut.
Tapered along the length.
Fitted with a heavy duty Ash handle.
Overall length 15.5"
Robert Sorby Micro Bent Gouge
P500903
Micro Bent Gouge (P50)
The size and design of the handles puts Robert Sorby’s micro tools ahead of all others.
The handles are larger and therefore more comfortable – particularly during prolonged use.
Solid brass ferrules enhance the overall design but are also functional when suspended in a tool rail.
Precision closed-die forgings ensure accurate shape and size of every blade.
Highly...
Bollé Sphere Safety Shield
BSS5214
Bollé Sphere Safety Shield
The Bollé Sphere face shield is an excellent option for face and brow protection.
It features a clear, polycarbonate visor which is resistant to high energy impact (A marking) which gives a 180° field of vision and weighs in at a mere 355g.
The easy to rise headgear and brow guard are adjustable for both height and depth and the SPHERE adapts itself...
Robert Sorby Excelsior Ultima Cutter
SOV-ULTCUTG
Excelsior Ultima Cutter (SOV-ULTCUTG)
The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms.
It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool.
The titanium nitride version of the cutter adds wear resistance and...
Robert Sorby Patriot Chuck Drive Centre
RSPDC
Patriot Chuck Drive Centre
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
Strong and durable design.
Robert Sorby Mushroom Tool
804H
Mushroom Tool (804H)
The Mushroom Tool uses the standard shaft and handle with the cutter particularly suitable for undercutting the cap of a mushroom, but may be adapted for undercutting.
Robert Sorby Modular Micro Spindlemaster
B888/2
Modular Micro Spindlemaster Unhandled (B888/2)
A miniature version of its versatile big brother the the modular micro Spindlemaster can be used to plane, bead, cove and trim end grain.
It's easy to use and easy to sharpen, and like the larger version, the polished back bevel helps to produce a high quality finish.
The unhandled tool allows the turner to add their own handle.
Delivers...
Robert Sorby Ultima Finishing Cutter Head
SOV-ULTFCH
Ultima Finishing Cutter Head
An optional finishing cutter head which has a shear scraper cutter can be fitted allowing the turner to achieve a smooth surface finish.
Uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Designed for use in the Sovereign Ultima hollowing system (SOV16S-ULTS) and (SOV22S-ULTM).
Robert Sorby Hollowmaster + 2 Tips
SOV-RS230
Hollowmaster + 2 Tips (SOV-RS230)
The Hollowmaster is designed to enable the hollowing of vases.
Its swan neck shape allows the cutter to access under rims.
Like the Multi Tip Hollowing Tool it has a half round shank which when the flat surface is placed on the tool rest gives extra control.
It comes complete with two cutters - one for hollowing and a second for finishing.
Robert Sorby Cutter Set with Bead/Cove/Recess Shapes
RS237C
Cutter Set with Bead/Cove/Recess Shapes (RS237C)
This set features three cutters for Robert Sorby's popular Multi-tip Hollowing Tool.
RS236C
The RS236C is the larger of two double sided beading cutters and is designed to cut 3/8" and 5/8" beads.
Designed for use with: Multi-tip Hollowing Tool (RS200KT and RS200)
RS235C
Similarly the RS235C is the larger of two...
Razertip SL1 Pyrography Unit (Power Supply Only)
SL1-UK-PS
Razertip SL1 Pyrography Unit (Power Supply Only). You will require a pen and cord to use the SL1 power supply. They are not included in the box, only available to buy separately.
Razertip SL3 Pyrography Unit (Power Supply Only)
SL3-UK-PS
Razertip SL3 Pyrography Unit (Power Supply Only). You will require a pen and cord to use the SL3 power supply. They are not included in the box, only available to buy separately.
Robert Sorby Mirco Skew Chisel 1/2"
869
Skew Chisel (869)
Rectangular in section, giving this type of skew more weight.
This makes them superb for large spindle work.
Lifetime HSS Guarantee.
Robert Sorby TurnMaster Excelsior French Curve Cutter
RSTM-GT4
TurnMaster Excelsior French Curve Cutter (RSTM-GT4)
Titanium Nitride bonded onto quality High Speed Steel, provides the same advantages as HSS whilst enhancing the cutting life of the tool tip.
Use the same traditional sharpening equipment used for HSS.
Sharpens to 0.12-0.2 microns.
Harness of coating up to 85RC.
Material is Titanium Nitride on M2 HSS.
Better used for internal shaping...
Burn-through Transfer Paper
PSPAP
Razertip Burn-through Transfer Paper
Create stunning woodburning designs with the help of Razertip's Pyro Studio burn-through transfer paper. Our top-quality transfer paper is specifically crafted to transfer intricate patterns onto your work surface with ease. Whether you're a pyrographic enthusiast or just starting out with woodburning, our paper will help you bring your designs to life...
Robert Sorby Screw Chuck 1/4"
649
Screw Chuck 1/4"
An inexpensive mini screw chuck suitable for miniature projects that fits into the jaws of the Patriot woodturning chuck.
Robert Sorby Universal Sharpening System Upgrade
W446/447UPG
Universal Sharpening System Upgrade
Sharpen those awkward bowl and fingernail gouges with precision by upgrading your Universal Sharpening System Adjustable Platform (446) into the Deluxe system.
This simple upgrade kit includes the fingernail profiling arm, boss and cross bar.
Slide the cross bar into place on your existing frame, drop the fingernail profiling arm into the boss and you're...
TurnMaster HSS Unhandled + 3 Cutters
RSTM-ST123
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects,...
Robert Sorby Mushroom Cutter
804C09
Mushroom Cutter (B804C09)
The Robert Sorby Mushroom Cutter is excellent for producing an undercut under the rim of a bowl or mushroom.
This immensely popular shape is also available with the TurnMaster but the two cutters are not interchangeable.
The Mushroom Cutter is one of 14 specialised tips that support a range of tools and offer incredible flexibility to the turner.
Sharpening:
Use...
Robert Sorby Sovereign Threaded Coupler
SOV-TC
Sovereign Threaded Coupler (SOV-TC)
For those wanting to join two or more Sovereign handles together we offer a dedicated threaded coupler.
This item is compatible with:
Sovereign 4" Handle Extension (SOV-EXT)
Magnetic Tool Holder
985
Fixed to a wall, this rack will hold your tools fast and safe when not in use.
35mm long.
Tools not included.
Butterflies Artist's Stencils
HSBS
Hampshire Sheen's new butterfly vinyl stencils are precision cut from professional grade paint masking vinyl and can be used as part of virtually any application technique. Have a go with air brushes, daubing with sea sponges, painting or anything you like!
Being light solvent resistant, Hampshire Sheen stencils can be used to apply water or alcohol based colours, aerosols, metallic or other...
Robert Sorby TurnMaster HSS Inside Cutter
RSTM-TIP4
TurnMaster HSS French Curve/ Inside Cutter (RSTM-TIP4)
This super fine grain structure will provide a razor sharp edge.
The result is a superior finish to your turning projects and less need for sanding.
Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.
Sharpens to 0.2 - 0.4 microns.
Hardness 62RC.
Material M2 HSS.
Better...
Robert Sorby Patriot Chuck Jaws 3.1/2"
RSJ4
Patriot Chuck Jaws 3.1/2"
These jaws allow for even bigger bowls up to 16" diameter to be held securely.
Complements the majority of lathes.
Light and compact, yet ideal for all sizes of project.
Smooth opening and closing action every time.
Robert Sorby Unhandled Easybeader
814
Unhandled Easybeader (814)
The Easybeader is designed to quickly and efficiently cut a series of evenly spaced beads.
Conceived by a production turner who needed to produce bee-hive designs, the Easybeader is simple to use and easy to sharpen.
Comes complete with a full set of instructions.
Ideal of honey dippers.
Lifetime HSS Guarantee.
Robert Sorby Five Piece Beading Tool Set
A55HS5T
Five Piece Beading Tool Set (55HS)
Bead forming tools cut perfect semi-circular beads every time.
Nose design permits multiple bead designs.
Set includes:
B835031 1/8" - 3mm
B835051 3/16" - 5mm
B835061 1/4" - 6mm
B835081 5/16" - 8mm
B835101 3/8" - 10mm
Robert Sorby Micro Spindle Gouge 1/8"
B862
Micro Spindle Gouge (862)
A spindle gouge is a detailing tool used on between centre work where the grain is running parallel to the lathe bed.
Part of the micro turning tool range.
Lifetime HSS Guarantee.
Robert Sorby Fluted Parting Tool 1/16"
87002
Fluted Parting Tool (B87002W)
This parting tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face.
These sever the fibres to produce a burnished finish.
The tapered profile also reduces the risk of binding in the cut.
Lifetime HSS Guarantee.
Robert Sorby Ultima Cutter
SOV-ULTCUT
Ultima Cutter (SOV-ULTCUT)
The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms.
It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool.
The titanium nitride version of the cutter adds wear resistance and so increases...
Robert Sorby Spindle Gouge 1/4"
867
Spindle Gouge 1/4" (867)
A spindle gouge is a detailing tool used on between centre work where the grain is running parallel to the lathe bed.
Part of the micro turning tool range.
Lifetime HSS Guarantee.
Teak Oil 250ml
TO250
Nourishes and enhances the natural beauty of hard exotic/oil wood; teak, iroko, rosewood etc.Provides a good durable water resistant finish.Suitable for interior and exterior use.Toy safe.
Robert Sorby Tear Drop Cutter
RS213C
Tear Drop Cutter (RS213C)
The Robert Sorby large tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great...
Robert Sorby Fingernail Profiler Upgrade
W445/447UPG
Fingernail Profiler Upgrade
Accurately sharpen a range of woodworking and woodturning tools by upgrading your Universal Sharpening System Fingernail Profiler (445) into the Deluxe system.
The addition of the adjustable platform opens the door to tool sharpening accuracy. Say goodbye to guesswork. Simply screw the adjustable platform onto your existing frame and you're ready to go.
A range...
Robert Sorby Five Piece Midi Woodturning Tool Set
A52HS5T
Five Piece Midi Woodturning Tool Set (A52HS5T)
The ideal turning tool combination for those preferring smaller tools. Five high quality HSS tools, all essential for bowl and spindle turning.
The A52HS5T, also known as the 52HS set, includes:
Spindle Roughing Gouge 3/8" (details spindle gouge)
Flat Skew Chisel 1/2" (ideal for smoothing spindle work)
Spindle Roughing Gouge 3/4"...
Robert Sorby Unhandled Fluted Parting Tool
B832020
Fluted Parting Tool Unhandled (B832020)
Size: 1/16" - 2mm
This parting tool has a flute running along the bottom edge, creating two sharp spurs at the cutting face.
The server are fibres to produce a burnished finish.
The tapered profile also reduces the risk of binding in the cut.
Lifetime HSS Guarantee.