Flexible Connector 20mm - 60mm
CVA10050102
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port.If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it.The adaptor can also be used to connect directly to a 2.5' diameter extraction system and...
2 1/2" Hose End
CVA25023100
This adaptor attaches to 2.5" diameter flexible hose, allowing it to be fitted to the 2.5" inlet of a dust extraction machine.
Airliner Twist Pen Kit
PKLINER
Airliner Ballpoint Twist Pen Kit
Anyone who loves planes, travelling or flying high and fast will love a handmade Airliner pen. The pen cap represents the front view of a modern jet turbine engine showing the fan blades. The pen clip embodies an airplane in flight, leaving a jet stream in its wake. While the pen tip represents the exhaust part of the engine which continues the engine theme from...
Robert Sorby Goblet & Bowl Mops
W49
Goblet & Bowl Mops (494)
Produced from a fine grade of cotton these deluxe mops have been made to deliver the ultimate finish.
They are used after sanding to buff oil, lacquer and wax finishes to a lustrous sheen.
Mops are fixed to the Sandmaster using the pigtail mandrel (W491).
Wire Burners - Pen Turners Set
KC3
From America, the KC Wire Burners can add that little extra detail to your turned work.The wires are made from high quality steel, and each burner should last several dozen applications before needing to be replaced.
Robert Sorby Spindle Roughing Gouge 5/16"
866
Spindle Roughing Gouge (866)
A commonly used tool recommended for the initial turning of uneven or square spindle stock to round.
The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece. This tool is commonly used for preparing pen blanks.
General Care
We recommend applying a light oil to the blades...
NOVA 76mm Power Grip Jaws
PJSN
The most powerful jaw available for large spigot/hollow turning.
Great multipurpose jaw for bowl and hollow form turners
Suitable for NOVA SuperNOVA2 and NOVA Titan Chucks only
Included as standard with all NOVA Titan Chucks
EXPANDING GRIP
95mm (3.74”) – 116mm (4.56”)
CONTRACTING GRIP
Square: 76mm (2.99”) – 55mm (2.16”)
Spigot: 97.8mm (3.85”)...
Square Carbide Cutter
SQ15
Cutter Size: 15mm square 2.5mm thick Cutting angle: 35 degree Mounting Countersunk hole: 6.15mm diameter Suitable for: Easy Wood Tools - Easy Roughers, Full & Pro (cutter (Ci1) Woodpecker Ultra-Shear FSS & MSS (cutter 20121) Simple Woodturning Tools - Simple Rougher SR
Robert Sorby Round Skew
813H
Round Skew (813H)
Intended for use on Spindle work.
Lightweight, making it highly manoeuvrable.
Ideal for production work.
Can be used on fine, detailed projects up to larger functional work to produce beads, coves, highlights and other details.
Lifetime HSS Guarantee.
Yellow Boxwood
YBOX
Color/Appearance: Heartwood ranges from light pink to golden brown. Pale gray sapwood is sharply demarcated from heartwood. Commonly seen in burl form. Please note, the image is an example of what you could create with Wild Mango wood.
Robert Sorby ProEdge Pigtail For Mop
PEPIG
ProEdge Pigtail For Mop
Pigtail mandrel accessory to fit the ProEdge Sharpening System.
Used to mount a buffing wheel onto the ProEdge.
Buffing wheel is not included.
Chameleon Flakes (Pack of 6)
TT-CFPHO
The Tiny Turner Chameleon Flakes (Pack of 6)
These amazing, chameleon colour-shift flakes have been chosen to give you a vibrant selection of striking colours to use in your work.
Emma Cook 'The Tiny Turner' uses these to create her banded bowls (as well as the chameleon powders).
Please note: each colour has a slightly different volume due to the different densities of that particular...
Robert Sorby Hollowmaster
RS230KT
Hollowmaster (RS230KT)
If even more access under the rim is required then the swan-necked Hollowmaster is an ideal complement to the Multi Tipped Hollowing Tool.
It has a flat working surface for stability, a hollowing cutter in an adjustable washer and also has an internal scraper cutter.
Cutters are sharpened with a diamond hone.
Full size Hollowmaster is 22" long and midi-size is...
Pen Turning: A Foundation Course
BPTFC
From the Back Cover Pen turning doesn’t require many costly tools, and it doesn’t take long to produce wonderful results. This is the ideal guide for those keen to learn the art of creating pens. All the basic techniques and information needed are fully explained, from blank preparation to turning, sanding, and assembling. Author: Kip Christensen & Rex Burningham Paperback: 119 pages Publisher:...
The Art of Turned Bowls by Richard Raffan
BTATB
From the Back Cover Everyone loves a spectacular bowl. In this provocative, in-depth examination of bowl design, master turner Richard Raffan teaches how to create bowls that will delight long after the colours and figure of the wood have faded. Great bowl design is about shape. Raffan shows how to create enduring and beautiful shapes from both and artistic and practical point of view – from creating...
Robert Sorby Spiralling Cutter
B350
Spiralling Cutter (B350)
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects.
One of a family of five cutters for the large texturing and spiralling tools.
Experiment using the various pitch depths these cutters provide. With a bit of practice you'll...
Round Carbide Cutter
RD15
Cutter Size: 15mm diameter 3.2mm thick Cutting angle: 30 degree Mounting Countersunk hole: 4.9mm diameter Suitable for: Robert Sorby Turnmaster Rockler Full Size Tool (cutter R2) Harrison Specialities Simple Turner & Hollower STH Tool Harrison Specialities Simple Swan Neck Hollower...
Round Carbide Cutter
RD16
Cutter Size: 16mm diameter 3mm thick Cutting angle: 30 degree Mounting Countersunk hole: 5.5mm diameter Suitable for: The AXE Carbide Tip Turning Tool by Carter Products Carbide Wood Turning Tools Easy Wood Tools (cutter Ci0)
Stickmaking A Complete Course
BSCC
From the Back Cover This complete introduction to stickmaking explains how to make a wide range of traditional walking sticks, market sticks and crooks. Expanded to include more detailed coverage of tools, moulds, formers, jigs and materials, this book is the ultimate, comprehensive guide to the hobby. Stickmaking shows you how to select suitable timbers, as well as alternative materials such as...
Big Book Of Pyrography Projects
BBPP
From the Back Cover
All-in-One Woodburning Guide
If you've ever wanted to take up the creative art of pyrography, here's the perfect place to start. Big Book of Pyrography Projects is packed with tips, tricks, and inspiration. All you need is this big book and an inexpensive woodburning tool to start adorning wood, paper, gourds, and more with beautifully burned images and patterns.
Leading...
Bandsaw Maintenance Course
BANDSAW
Bandsaw Maintenance Course
Learn the safety procedures, operation, and maintenance of a bandsaw!
Hosted in Harworth in May 2025 and in Sheffield from June 2025, this is a half-day instructional course suitable for all abilities. During this 3-hour session, you will learn how to set up a bandsaw correctly, be able to practice safe setting procedures and watch how to operate the bandsaw safely.
Topics...
Robert Sorby Spiralling Tool
320-330
Spiralling Tool (320-330)
Creating barley twists, spirals and flutes has always represented a problem for the woodturner.
The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner's imagination to run wild as he enters a new field of decoration.
Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice...
Patriot Screw
RSPS
Parallel thread for extra grip, fits directly into 50mm jaws.
Also fits all NOVA chucks.
Mixed Christmas Shapes (Pack of 15)
J60026
A fun Christmas activity! Use this pack of themed blank ornaments to create customised decorations for your tree, gifts, and other festive events - a fun activity for the whole family!
Decorate with paint, pyrography, glitter and more to create your own unique masterpiece for the holidays!
Lightweight wood.
Unfinished; suitable for pyrography, paint and more!
Each blank has a hole for...
Fluffy Brush
TT-FLBR1
The Tiny Turner Fluffy Brush
This wonderfully fluffy brush is fabulous for dry-brushing and for applying powders and flakes to size.
1 x Single brush.
One-Handed Bar Clamp
TREOHBC
One handed bar clamps and spreaders for a variety of medium duty wood working applications.
Carbon steel bar and reinforced nylon body for strength and durability and can achieve a sustainable clamping force up to 150kg
Ideal for medium duty clamping and temporary hold down work
The quick release insert trigger enables the clamps to be quickly positioned and released
Easy push button system...
Buff Off Towels (Pack of 5)
TTPC5
Pack of 5 Terry Towelling polishing cloths, perfect for buffing off Odie’s Oil and polishing wooden furniture and floors etc.
The average size of each towel is 36" x 18″ and the pack weight varies between 1.3 and 1.6kg (please note, towel sizes will vary and some are cut down larger towels, we ensure you get a good value pack).
For your safety, we highly recommend that you cut...
Large Square Wooden Storage Box
J60001
Plain wooden chest for you to personalise and decorate as you like. Whether it be used as a Christmas eve box, blanket box, memory box or toy box, once personalised, it could become a unique, precious item to cherish forever.
Please note, as wood is a natural product, the grain will vary between boxes.
External Size: 30 x 30 x 23cm
Internal Size: 27.5 x 27.5 x 19cm
Robert Sorby Modular Micro Parting Tool 1/16"
B888/3
Modular Micro Parting Tool (B888/3)
A smaller version of the full size diamond parting tool, the special profile of this tool reduces the risk of binding in the cut.
It also reduces the amount of heat build-up caused by friction, thereby lessening the chance of burning the bottom of the parted-off project.
Possesses a fine 2mm cutting edge.
Lifetime HSS Guarantee.
Compatible with the...
Robert Sorby Patriot Chuck Jaws 2.3/4"
RSJ3
Patriot Chuck Jaws 2.3/4"
For bigger bowls and projects up to 13" diameter that need a little more substantial hold.
Complements the majority of lathes.
Light and compact, yet ideal for all sizes of project.
Smooth opening and closing action every time.
Robert Sorby Aluminium Handle
B888
Aluminium Handle (B888)
The micro tool system is ideal for woodturners who specialise in miniature pieces.
This micro aluminium handle 5.1/2” (140mm) is ideal for those who work primarily on mini or midi lathes.
The handle can be fitted with various interchangeable blades (sold separately) which makes this a versatile piece of kit.
Blades to fit this handle:
Modular Micro...
Robert Sorby Thread & Sizing Gauge
H973000
Thread & Sizing Gauge (H973000)
Ideal for box-makers, this gauge takes all the guess-work out of fitting the major and minor diameters of pieces.
With the gauge set at the unmarked anvil this creates a 1:1 correlation between the measuring faces and facilitates accurate push fits.
The other three anvils are marked 10, 16 and 20 which relates to the tip most commonly used by thread cutters.
The...
NOVA Viking DVR 16" Drill Press (Bench Mount)
VIKING
NOVA’s latest machine is a 16” DVR Benchtop Drill Press. The NOVA Viking is a 1HP, 150-3,000 RPM (programmable to 5,000) electronic variable speed machine, with a large easy to read display and a variety of intelligent features such as Auto Start feature for one handed drilling and Electronic Depth Stop. The table can be tilted and rotated.
Direct Drive Power and Consistent Torque
1HP...
Robert Sorby ProEdge Polishing Mop
PEMOP
ProEdge Polishing Mop
The Polishing Mop is an accessory for the Robert Sorby ProEdge sharpening system.
The buffing wheel fits onto the sharpening system after the Pigtail mandrel has been installed (Mandrel is not included here - search for PEPIG).
Buffing wheel diameter 110mm.
Creates a high polish on any steel.
6" - Gents Saw
PAXG
The perfect partner to the PAX quality hand and tenon saw, this saw has an alloy steel blade with a mirror finish, high quality, brass back and an attractively finished rosewood handle as standard.20tpi
Robert Sorby Box Scraper
B829192
Box Scraper (829)
The special cutting profile of this scraper makes it ideal for cutting the parallel side walls of end grain boxes.
The small radius on the point at the bottom of the cutting section creates a smooth intersection between the side wall and flat bottomed vessels.
The profiles cause this to be very responsive and sensitive in use.
Lifetime HSS Guarantee.
Three Piece Knife Starter Set
KN500
Three of Flexcut's most popular knives in one, Three-Knife Starter Set.
These knives are made with the same edge-holding steel as our gouges and chisels. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Polishing Compound is included with the set to maintain your razor-sharp knives.
The set contains
KN20 - Mini Chip Knife
KN27 - Mini...
Robert Sorby Internal/External Caliper 8.1/2"
H978500
Internal/External Caliper 8.1/2" (H978500)
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture.
As with double ended callipers the measurement at one end automatically transfers to the opposite.
Available in 6" and 8 1/2" models.
NOVA 130mm Jaws
JS130N
The NOVA JS130N 130mm (5″) Chuck Accessory Jaw Set is designed to mount big bowls, up to 29″in diameter. They are designed particularly for the expanded dovetail, reverse dovetail for gripping footed bowls. With a special NOVA wood turning dovetail profile, designed specifically for maximum strength and holding in wood turning, without crushing the wood fibers. These jaws will hold in both...
Spirit Thinners
CST500
A clear, meths based solvent for use with Spirit Stain, French Polish and also for making polishes using shellac flakes.
Barrel Trimmer and Sleeves System
TRIMSYS
7mm Barrel Trimmer with 3/4" Head and Sleeve Set
The 9 sleeve sizes will insert into tube sizes: 8mm, 11/32 in., 3/8 in., 10mm , 25/64, 10.5mm, 27/64 in., 15/32 in., 31/64 in., 12.5mm, 33/64 in., 9/16 in., 37/64 in. Sleeves are 2-1/2 in.long.
Woodsurfers Bowlrest
9006
NOVA 9006 Woodsurfer Bowl Rest is a unique curved toolrest to make bowl turning easier. Excellent for large bowls. With a 1' shank for a super strong platform and solid cast iron for maximum strength. Fits all NOVA lathes (excluding the NOVA 46000 Comet II Midi Lathe) and suitable for all lathes with a 1' toolpost fitting. - Fits all lathes with a 1' Toolpost fitting - Special curved design makes...
Tormek - Universal Gouge Jig
SVD-186
Use the SVD-186 for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186 can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The SVD-186 and Tormek wetstone machine combination offers three crucial benefits. The water cooled wheel results in a superior edge,...
Spare Star Jaw Screw Set
TR6077
Accessory fastening spares kit for the NOVA chucks. Come standard with NOVA Chucks. Contains 8 M6 Screws. Handy spares pack to have on hand in the event of fasteners going missing.
Heavy Duty One Handed Bar Clamp
TREOHBC6-HD
Heavy Duty One Handed Bar Clamp
High quality aluminium heavy duty one handed bar clamps and spreaders for a variety of wood working applications.
Body is manufactured from aluminium with a carbon steel bar
Throat Depth: 85mm (3 3/8")
Sizes and Details
EOHBC6-HD: Clamping Capacity 150mm (6") Minimum Spreading Capacity 168mm (6 5/8") Maximum Spreading Capacity 355mm...
Round Magnetic Dish
MD01
Round Magnetic Dish ideal for holding tools, nuts, bolts etc.
Magnetic both sides - can be used at any angle
Features a rubber coated magnetic base to protect surfaces from wear or scuffing
Ideal for use in awkward locations to retain tools, screws, bolts etc
Premium quality dish with stainless steel finish
Available in 100mm or 150mm diameter
Robert Sorby Sizing Tool
970
Sizing Tool (H970000)
In order to obtain accurate and consistent diameters up to 3" the Sizing Tool is a useful accessory.
It takes the parting tool, 3/16" diamond parting tool and the beading and parting tool.
Perfect for measuring the inside or the outside of your pieces on the board.
Adjusting the distance between the tip and cutting edge determines the diameter of filming.
It...