Search results for... Zebrano lathe
Did you mean zebra lathe?
NOVA 28mm Mini Step Jaws
6025
The NOVA 6025 Mini Step Chuck Accessory Jaw has three step sizes providing optimum gripping of 3 base sizes with minimal crush damage to wood. The internal has a spigot grip for small unsupported or supported spindle work.
Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibres.
Precisely machined from a single solid piece of 1045...
Cole Jaw Buffer Accessory Kit
6030
Accessory for the NOVA JSCOLE Cole Jaw Set and the NOVA 6006 Mini Cole Chuck Jaw Set. This kit contains 8 multi-sided buffers and 8 long pin buffers to enable you to hold a variety of projects in your NOVA Cole Jaws and Mini Cole Jaws.
8 multi-sided buffers, 8 long pin buffers (4 sided buffers and a long pin buffers).
Exclusive for the NOVA Cole and Mini Cole Jaws.
These 2 sets cover a majority...
Robert Sorby Screw Chuck 1/4"
649
Screw Chuck 1/4"
An inexpensive mini screw chuck suitable for miniature projects that fits into the jaws of the Patriot woodturning chuck.
Robert Sorby Faceplate Ring
FACERING
Faceplate Ring
Designed with an internal dovetail to fit securely on to the standard 2" (50m) jaws.
These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting.
Available with an outer diameter of 3 1/8" (80mm) and 4 3/4" (120mm).
Robert Sorby Patriot Chuck Jaws 1.3/8"
RSJ15
Patriot Chuck Jaws 1.3/8"
Designed for smaller projects such as boxes and bowls up to 6" diameter.
Robert Sorby Patriot Chuck Jaws 2.3/4"
RSJ3
Patriot Chuck Jaws 2.3/4"
For bigger bowls and projects up to 13" diameter that need a little more substantial hold.
Complements the majority of lathes.
Light and compact, yet ideal for all sizes of project.
Smooth opening and closing action every time.
Robert Sorby Patriot Chuck Jaws 3.1/2"
RSJ4
Patriot Chuck Jaws 3.1/2"
These jaws allow for even bigger bowls up to 16" diameter to be held securely.
Complements the majority of lathes.
Light and compact, yet ideal for all sizes of project.
Smooth opening and closing action every time.
Robert Sorby Patriot Chuck Jaws 4.1/4"
RSJ5
Patriot Chuck Jaws 4.1/4"
Large bowls and platters over 16' diameter can be turned due to the much bigger spigot or recess this set of jaws allows.
Robert Sorby Bowl Reversing Jaws
RSJBR
Bowl Reversing Jaws
These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl.
Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.
Robert Sorby Patriot Chuck Deep Grip Jaws 4.1/4"
RSJDG
Patriot Chuck Deep Grip Jaws 4.1/4"
Designed with deep sides to give extra grip on large logs and awkward pieces of wood.
They also have a large internal and external dovetail to securely hold large bowls in excess of 16" diameter.
Robert Sorby Patriot Chuck Long Nose Jaws
RSJLN
Patriot Chuck Long Nose Jaws
Rough turned bowls can be remounted internally with the reach of almost 4" of these jaws.
Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2" away from the chuck body.
Robert Sorby Compatriot Chuck
LRSPCOMN34
Compatriot Chuck
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats.
Known as the Compatriot chuck these are the:
RSPCOM (requires insert version)
RSPCOMN34 (M33 x 3.5)
Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
Robert Sorby Patriot Chuck Drive Centre
RSPDC
Patriot Chuck Drive Centre
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
Strong and durable design.
Robert Sorby Patriot Wobble Chuck
RSWC
Patriot Wobble Chuck
An inexpensive introduction to off-centre or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring.
The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means.
It is then off-set by rotating the upper section of the Wobble Chuck.
Ideal...
Cole Jaw Fastening Kit
NOVA-CJFK
Cole Jaw Fastening Spares.
Contains 2 different designs in each kit - 8 round buffers. 8 x black screws and 8 x gold screws.
Robert Sorby Patriot Chuck Zero Jaws
RSJZ
Patriot Chuck Zero Jaws
Zero Jaws will close down to 4mm minimum making them ideal for turning fine or delicate projects.
They are a must for those specialising in miniature work.
The dome shape is incorporated in the design to enable work very close to the project.
It also allows internal holding of larger projects without the fear of marking the wood.
Spare Jaw Screw Set
NOVA-SSK
Accessory fastening spares kit for the NOVA chucks. Come standard with NOVA Chucks. Contains 8 M6 Screws. Handy spares pack to have on hand in the event of fasteners going missing.
Robert Sorby Patriot Chuck 1" Pin Jaws
RSJP
Patriot Chuck 1" Pin Jaws
These Pin Jaws have a multitude of uses.
Ideal for small projects utilising the fine internal and external dovetail.
The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.
NOVA 20mm Mini Jaws
JS20N
The NOVA Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1″) jaws. They are designed to securely hold small bowls up to 6″ in diameter, and small, free-end spigot turnings up to 5″ long. They can be used in expansion mode for bowls, or in contraction mode for spigots. Made from K1045 medium tensile carbon steel...
Robert Sorby Three Piece Micro Hollow/Ornamental Set
A38HS3T
This set of micro turning tools has been specifically designed for miniature hollowing.
Robert Sorby Chuck Exert
NEX
To enable Patriot chucks with a standard thread to fit large spindle lathes.
Robert Sorby Patriot Chuck Jaws 1"
RSJ1
Patriot Chuck Jaws 1"
With a fine internal and external dovetail, these jaws are perfect for fine intricate or miniature projects.
NOVA 10" Cole Jaws
JSCOLE
NOVA Cole Accessory Jaw Set is an accessory for NOVA chucks. Designed to expand the range and capacity of your standard NOVA chuck for specific projects and applications.
Designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned
Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility
Suitable...
Titan III Chuck with Power Jaws
13060
Titan III Chuck with Power Jaws 1.1/4" x 8tpi
The largest chuck in the NOVA chuck range. Ideal for those large lathes with 20"/508mm diameter swing and larger. Super Aggressive Holding Power. The Nova Titan Chuck is a large solid chuck designed for use on large lathes and for larger projects. This solid 5" diameter chuck with it's larger jaw capacity is capable of handling much...
Robert Sorby Modular Micro Pen Shear Scraper
B827PENSHEAR
Modular Micro Pen Shear Scraper (B827PENSHEAR)
Pen turning has always attracted woodworkers with a taste for highly finished, eye-catching work. This tool is commonly used for preparing acrylic pen blanks.
The cutter has 4 cutting edges which means you can easily rotate it up to 3 times giving you a fresh edge before having to sharpen. The cutter has radiused cutting edges for ease of use. We...
Robert Sorby Negative Rake Scraper 3/4"
821
Negative Rake Scraper (821)
Formerly known as the Hardwood Scraper it was originally designed to tackle hardwoods when producing musical instruments.
However, the tool is equally at home on all types of wood and is as effective on spindle work as it is on bowls – the action of the negative rake on the bevel reducing the risk of grain tear-out and leaving a polished surface that requires...
Executive Rollerball Pen
GERP
Traditional style and moderate heft of the Artisan® Executive Fountain Pen Kit make this pen a favourite among executives. With 10k gold plating, premium fountain ink refill and German made medium point iridium nib for smooth writing and dependable ink flow.
Pen in image is turned using pen blank, Thuya Burr (Ref TBPB)
Please note, the image is an example of what you could create with the...
SAFELOCK Woodworm Screw
10006
SAFELOCK Woodworm Screw
Standard with most NOVA Chucks.
Quick and easy method to mount unformed small bowl blanks.
Secure mounting to form the outside of bowls.
Strong thin form screw to cut into wood.
NOVA Dovetail Chisel
6008
Accessory for NOVA Chucks to quickly and accurately make the dovetail recess for the chucking of a bowl. Ensures a dovetail with a sharp, clean edge to precisely match to the dovetail contour of NOVA Accessory Jaws. Creates maximum holding power to your NOVA Chuck. Scaled with a handy mark out scale for use as a guide.
Spare Screw Set for Nova Protek Chuck
TR6077
Accessory fastening spares kit for the Protek NOVA chucks. Come standard with Protek NOVA Chucks. Contains 8 M6 Screws. The head is a Torq-screw fitting. Handy spares pack to have on hand in the event of fasteners going missing.
Robert Sorby Hollowing Tool 3/16"
B87305
Hollowing Tool (873)
Designed for hollowing miniature work.
Will work through the narrowest of apertures, down to as small as 3/16” (5mm).
Incredible intricacies can be achieved using this tool.
An essential tool for those who enjoy the challenge of turning pieces in miniature.
The unhandled version of the tool allows the turner to add their own handle.
Max depth: 1.1/2"
...
Robert Sorby Midi Round Cutter
RS130C
Midi Round Cutter (RS130C)
The Robert Sorby Midi Round Cutter is the perfect circular cutter for all general purpose turning.
An incredible all rounder this cutter provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening.
The perfect accompaniment for the Midi Hollowmaster the tool it was designed for and for delivering those scraping...
Robert Sorby Swivel Tip Complete
RS211
Swivel Tip Complete (RS211)
This set comprises the swivel clamp that holds the tip firmly in place for the RS2000.
Includes a Round End Swivel Tip.
This cutter curved cutting edge is the perfect tool for providing a gentle sweeping curve for example on the bottom of vases.
Robert Sorby Sovereign Handle
SOV
Sovereign Handle (SOV)
Sovereign handles, available in three sizes:
SOV-12
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
SOV-16
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required...
Robert Sorby Medium Ultima System
SOV22S-ULTM
Medium Ultima System (SOV22S-ULTM)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project.
The Ultima is available in two sizes.
The systems come fitted to the Sovereign...
Robert Sorby Medium Ultima Unhandled
SOV-RSULTM
Medium Ultima Unhandled (SOV-RSULTM)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Medium Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is...
Robert Sorby Sovereign Small Ultima Unhandled
SOV-RSULTS
Small Ultima Unhandled (SOV-RSULTS)
A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle.
The Small Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods.
It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging.
It is equally...
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...
Robert Sorby Sovereign Ultima Head - No Cutter
SOV-ULTMHEAD
Ultima Head without cutter (SOV-ULTMHEAD)
The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of...
Robert Sorby Small Ultima System
SOV16S-ULTS
Small Ultima System (SOV16S-ULTS)
The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system.
It is equally effective on bowl grain work as well as end-grain project and available in two sizes.
The systems come fitted to the Sovereign interchangeable...
Robert Sorby Sovereign Spiralling & Texturing Tool Set
TSOV-3370DBS
Sovereign Spiralling & Texturing Tool Set (SOV-3370DBS)
For decorative woodturning, this set is an absolute must! Features both the full size and modular micro systems to deliver a multitude of decorative shapes and patterns.
Set includes unhandled spiralling system, texturing cutter, spiralling cutters 2mm, 4mm and 6mm pitches, unhandled modular micro spiralling tool, 2 micro spiralling...
Robert Sorby Six Piece Sovereign Turning Tool Wooden Box Set
SOV-67DBS
This value added box set includes the same tools as the ever popular 67HS but with the benefits afforded by the Sovereign handle and extension – effectively two handle sizes in one.
Robert Sorby Sovereign 4" Handle Extension
SOV-EXT
Sovereign 4" Handle Extension (SOV-EXT)
The Sovereign Extension is a useful addition to the range of accessories.
Custom-made during the development of the new Sovereign sets.
This 4″ extension adds length to any Sovereign handle.
Use the Sovereign Threaded Coupler (SOV-TC) to join handles together.
Robert Sorby Midi Multi Tip Hollowing Tool with 3 Tips
SOV-RS100
Midi Multi Tip Hollowing Tool with 3 Tips (SOV-RS100)
The Multi Tip Hollowing Tool has a half round shank which enables a full 3/4" to be in contact with the tool rest giving the turner complete control when hollowing.
Of the two hollowing tips one is rounded for a flowing shape whilst the other is more pointed and as such is ideal for a crisp corner in a box.
They are fitted to a swivelling...
Robert Sorby Sovereign Hollowing Starter Set
SOV-RS200DBS
Sovereign Hollowing Starter Set (SOV-RS200DBS)
This set focuses on one of Robert Sorby's most popular tools - the multi tip hollowing tool (RS200KT).
Whether starting out or have been turning for years, this tool provides flexibility the woodturner needs to make light work of more specialised projects.
Set includes:
Multi-Tip Hollowing Tool
3/8" Spindle Gouge
3/8" Bowl...
Robert Sorby Extra Large Multi -Tip Hollowing Tool with 3 Tips
SOV-RS300
Extra Large Multi -Tip Hollowing Tool with 3 Tips (SOV-RS300)
The Multi Tip Hollowing Tool has been in existence for a number of years.
It comes complete with three cutters - two for hollowing and a third for scraping.
One of the beauties of this tool is that it has a half round shank which enables a full 3/4' to be in contact with the tool rest giving the turner complete control when...
Robert Sorby Sovereign TurnMaster Set in Wooden Box
SOV-RSTMDBS
Sovereign TurnMaster Set in Wooden Box (SOV-RSTMDBS)
The Robert Sorby TurnMaster is the perfect tool for the beginner or a fantastic foil for the more experienced woodturner looking for a flexible tool to equip their workshop.
This set comes complete with 3 detachable heads to allow for quick interchanging.
Set includes:
TurnMaster shank with HSS detail point cutter fitted
HSS round...