Robert Sorby Hollowing Tool 3/16"
B87305
Hollowing Tool (873)
Designed for hollowing miniature work.
Will work through the narrowest of apertures, down to as small as 3/16” (5mm).
Incredible intricacies can be achieved using this tool.
An essential tool for those who enjoy the challenge of turning pieces in miniature.
The unhandled version of the tool allows the turner to add their own handle.
Max depth: 1.1/2"
...
Robert Sorby Modular Micro Boring Tool
B888/6
Modular Micro Boring Tool (B888/6)
This tool is designed for boring out apertures and for straight hollowing on small projects.
Compatible with the Robert Sorby Modular Micro Aluminium Handle (B888).
Robert Sorby Modular Micro Swan Neck Tool
B888/7
Modular Micro Swan Neck Tool (B888/7)
A great tool for developing the undercut and taking the hollowing shape to the next level.
Excellent for developing small hollow forms such as small vases and egg cups.
Compatible with the Robert Sorby Modular Micro Aluminium Handle (B888).
Robert Sorby Three Piece Modular Micro Hollowing Set
A87HS3T
This modular hollowing set is a great starter set for those wanting to experiment with hollowing forms in miniature.
Robert Sorby Reversible Hooker for Deep Hollowing Tools
RS210
Reversible Hooker (RS210)
The Hooker is designed as a safe method of hollowing vessels through narrow openings.
It comes fitted with a scraper cutter (RS222) for finishing but also takes the swivel assembly and hollowing tips (RS211C and RS212C).
Its design allows for both inboard and outboard turning.
It should be fitted to the Main Handle (RS202) and Side Handle (RS203) or alternatively...
Robert Sorby Swivel Tip Complete
RS211
Swivel Tip Complete (RS211)
This set comprises the swivel clamp that holds the tip firmly in place for the RS2000.
Includes a Round End Swivel Tip.
This cutter curved cutting edge is the perfect tool for providing a gentle sweeping curve for example on the bottom of vases.
Robert Sorby Domed Cutter
RS221
Domed Cutter (RS221)
One of two double ended chattertool cutters that will produce a myriad of decorative patterns.
Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre.
To be produced on end grain only.
Sharpening:
Use a diamond...
Robert Sorby Diamond Sharpening File
RS224
Diamond Sharpening File (RS224)
The Diamond Sharpening File is an ideal accessory for sharpening replaceable tool tips by hand.
This tool can also be used on knives, scissors, even tungsten carbide router bits.
For maximum life use water during use.
Robert Sorby Swivel Tip Probes
B8801003
Swivel Tip Probes (880)
For increased access in restricted openings (tall vases and deep vessels) these probes are ideal.
Each size offers a different combination of cutting tip suitable for a range of turning tasks; making these tools ideal for the rapid removal of stock, general profiling, shaping and even fine finishing work on side and end grain.
In its unhandled form (RS213) this fits...
Robert Sorby Jaw & Collet Tool
817
Jaw & Collet Tool (817)
Designed to cut the perfect dovetail required on a tenon or in a recess when mounting a timber blank on the jaw or collets of a woodturning chuck.
The unhandled version of the tool allows the turner to add their own handle.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby Relief Cutting Tool
B895001
Relief Cutting Tool (895H)
The Robert Sorby Relief Cutting Tool is designed to help the turner avoid stripping out the bottom of boxes when thread cutting.
For best results use in combination with the Tool Support Rest.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby Ring Tool
B845133
Ring Tool (845)
Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels.
This tool produces an unrivalled surface finish on end grain.
The unhandled version of this tool allows the turner to add their own handle.
Ideal for goblets and egg cups.
Comes complete with full instructions.
Robert Sorby Thread Cutters
890
Thread Cutters (890)
These Robert Sorby Thread Cutters are perfect for making lidded boxes, helping produce threaded lids, specially produced for cutting in wood.
Available Handled and Unhandled.
Producing threads needs a lot of practice and a steady hand but once mastered this technique adds significant value to your project.
Thread cutters are available in matching pairs for internal...
Robert Sorby Texturing Tool
310
Texturing Tool (B310)
This tool will enhance the visual and tactile qualities of any turned project.
By rubbing the cutter across the turned project an interesting textured effect can be created.
The texture pattern can altered by changing the angle of the cutter, the speed of the lathe, the position of the tool rest and the type of wood.
The range of textures can vary from an orange peel...
Robert Sorby Spiralling Tool
320-330
Spiralling Tool (320-330)
Creating barley twists, spirals and flutes has always represented a problem for the woodturner.
The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner's imagination to run wild as he enters a new field of decoration.
Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice...
Robert Sorby Toolrest
B360
Toolrest (B360)
The tool rest enables those who already possess a Texturing Tool (B310) to convert it to a Spiralling System.
Robert Sorby Texturing Cutter
B350/00
Texturing Cutter (B350/00)
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects.
One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide.
With a bit of practice you'll...
Robert Sorby Spiralling Cutter
B350
Spiralling Cutter (B350)
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects.
One of a family of five cutters for the large texturing and spiralling tools.
Experiment using the various pitch depths these cutters provide. With a bit of practice you'll...
Robert Sorby Unhandled Modular Micro Spiralling Tool
B370/0
Modular Micro Spiralling Tool Unhandled (B370/0)
The unhandled micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling System (B320, B320S).
This tool is also available with a handle (B370/A).
A further texturing cutter is available as an optional extra.
Robert Sorby Micro Texturing Cutter
B370
Micro Texturing Cutter (B370)
The Robert Sorby Fine Micro Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of small spiral patterns and textures on a range of projects including bowls, vases and boxes.
One of three cutters for the Modular Micro Spiralling Tool.
Experiment using the various pitch depths these cutters provide.
With a bit of practice...
Robert Sorby Chattertool Kit
RS215KT
Chattertool Kit (RS215KT)
The Chattertool creates random decorative patterns on end grain only, making it ideal for box lids and jewellery.
Each pattern created is unique as it is determined by the shape of the cutter, the speed of the lathe, the length of protrusion of the blade, and the type of wood.
The random nature of these decorations means they are unrepeatable unless exactly the same...
Robert Sorby Tool Support
B893003
Tool Support (893H)
Extra control is given by the tool support when threading internally.
Designed as a tool support for the Robert Sorby Relief Cutting Tool and for use with the internal thread cutters to make forming internal threads easier.
Robert Sorby Sandmaster Bowl Sander
W410
Sandmaster Bowl Sander (W410)
The Sandmaster is an essential part of every turner's tool kit.
It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time.
It avoids an uneven finish often associated with hand sanding and there is no danger of catching hands on the revolving project.
There is little to no surface damage/head build-up,...
Robert Sorby Goblet & Bowl Mops
W49
Goblet & Bowl Mops (494)
Produced from a fine grade of cotton these deluxe mops have been made to deliver the ultimate finish.
They are used after sanding to buff oil, lacquer and wax finishes to a lustrous sheen.
Mops are fixed to the Sandmaster using the pigtail mandrel (W491).
Robert Sorby Aluminium Oxide Discs 50mm
W412
Aluminium Oxide Discs 50mm (412)
Velcro Sanding Discs (10 pack)
Five different grit abrasives available to take even the roughest projects to a glass-like finish every time.
Perfect to fit the Robert Sorby Sandmaster Bowl Sander (W410) for hand sanding wood turned projects.
Robert Sorby Aluminium Oxide Discs 75mm
W413
Aluminium Oxide Discs 75mm (413)
Velcro Sanding Discs (10 pack)
Five different grit abrasives available to take even the roughest projects to a glass-like finish every time.
Perfect to fit the Robert Sorby Sandmaster Bowl Sander (W410) for hand sanding wood turned projects.
Robert Sorby Unhandled Micro Sandmaster
B888/0
Micro Sandmaster Unhandled (B888/0)
The perfect tool to help finish projects before applying finishing oils or paints.
Like its full size equivalent the Micro Sandmaster has an adjustable head to reach into tight corners.
It comes with a Velcro covered sponge pad onto which four different abrasive grits may be attached.
Working through the different grits of abrasive to take even the roughest...
Robert Sorby Aluminium Oxide Discs 25mm
W411
Aluminium Oxide Discs 25mm (411)
Abrasive Discs (Pack of 10)
Working through the different grits of abrasive to take even the roughest projects to a glass-like finish every time.
Perfect to fit the Robert Sorby Modular Micro Sandmaster Set (B888SM) for hand sanding wood turned projects.
Robert Sorby Sizing Tool
970
Sizing Tool (H970000)
In order to obtain accurate and consistent diameters up to 3" the Sizing Tool is a useful accessory.
It takes the parting tool, 3/16" diamond parting tool and the beading and parting tool.
Perfect for measuring the inside or the outside of your pieces on the board.
Adjusting the distance between the tip and cutting edge determines the diameter of filming.
It...
Robert Sorby Vessel Caliper
H9710000
Vessel Caliper (9710)
These vessel callipers are designed for internal and thin-wall dimensioning.
The straight arm is especially useful for accessing narrow vessels.
Sizes can be read at either end.
Available in 2.1/2", 5" and 10" models.
Robert Sorby Double Ended Calipers
H97
Double Ended Calipers (974)
These are an indispensable addition to the turner's armoury for measuring both wall thickness and diameters.
Because of their design the measurement taken at one end automatically transfers to the opposite end.
This enables the turners to take an accurate measurement reading without the need to remove the callipers.
Available in 4" and 7" models.
The...
Robert Sorby Internal/External Caliper 8.1/2"
H978500
Internal/External Caliper 8.1/2" (H978500)
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture.
As with double ended callipers the measurement at one end automatically transfers to the opposite.
Available in 6" and 8 1/2" models.
Robert Sorby Inside/Outside Calipers 6"
H976000
Inside/Outside Calipers 6" (H976000)
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture.
As with double ended callipers the measurement at one end automatically transfers to the opposite.
Available in 6" and 8 1/2" models.
Robert Sorby Depth Stop for Boring Tool
B853
Depth Stop for Boring Tool (B853)
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber.
The boring bar and depth stop (852H and 853) form an ideal method of quickly opening up a vessel to provide both entry opening and final hollowing depth.
Photo shows 853 fitted onto a tool.
Robert Sorby Thread & Sizing Gauge
H973000
Thread & Sizing Gauge (H973000)
Ideal for box-makers, this gauge takes all the guess-work out of fitting the major and minor diameters of pieces.
With the gauge set at the unmarked anvil this creates a 1:1 correlation between the measuring faces and facilitates accurate push fits.
The other three anvils are marked 10, 16 and 20 which relates to the tip most commonly used by thread cutters.
The...
Robert Sorby Ultima Finishing Cutter Head
SOV-ULTFCH
Ultima Finishing Cutter Head
An optional finishing cutter head which has a shear scraper cutter can be fitted allowing the turner to achieve a smooth surface finish.
Uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Designed for use in the Sovereign Ultima hollowing system (SOV16S-ULTS) and (SOV22S-ULTM).
Robert Sorby Medium Ultima Link
SOV-ULTLM
Medium Ultima Link (SOV-ULTLM)
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of positions...
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...
Robert Sorby TurnMaster Handled Chisel Includes 3 HSS Cutters
RSTM-HT123
TurnMaster Handled Chisel (RSTM-HT123)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work.
Designed...
TurnMaster HSS Unhandled + 3 Cutters
RSTM-ST123
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects,...
Robert Sorby TurnMaster Handled Chisel Includes 3 Carbide Cutters
RSTM-HCT123
TurnMaster Handled Chisel Includes 3 Carbide Cutters (RSTM-HCT123)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
This chisel includes Round, Detail Point and Square Tungsten Carbide Cutter.
Now woodturners can choose between tungsten carbide, titanium...
Robert Sorby TurnMaster Handled Chisel with Round Carbide Cutter
RSTM-HCT1
TurnMaster Handled Chisel with Round Carbide Cutter (RSTM-HCT1)
The tungsten carbide cutter does not require any sharpening. It makes light work of tough materials and is an extremely hard wearing material.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium...
Robert Sorby TurnMaster Handled Chisel with Detail Carbide Cutter
RSTM-HCT2
TurnMaster Handled Chisel with TCT Detail Cutter (RSTM-HCT2)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way...
Robert Sorby TurnMaster Handled Chisel with Square Carbide Cutter
RSTM-HCT3
TurnMaster Handled Chisel with Square Carbide Cutter (RSTM-HCT3)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the...
Robert Sorby TurnMaster Unhandled Chisel Includes 3 Carbide Cutters
RSTM-SCT123
TurnMaster Unhandled Chisel Includes 3 Carbide Cutters (RSTM-SCT123)
Providing choice and flexibility in one easy to handle tool.
This is an unhandled tool but will fit directly into your Sovereign Handle using a 1/2" collet.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between...
Robert Sorby TurnMaster Unhandled Chisel with Carbide Round Tip
RSTM-SCT1
TurnMaster Unhandled Chisel Carbide Round Tip (RSTM-SCT1)
This is an unhandled tool but will fit directly into your Sovereign Handle using a 1/2" collet.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide...
Robert Sorby TurnMaster Unhandled Chisel with Carbide Detail Cutter
RSTM-SCT2
TurnMaster Unhandled Chisel with Carbide Detail Cutter (RSTM-SCT2)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the...
Robert Sorby TurnMaster Unhandled Chisel with Carbide Square Tip
RSTM-SCT3
TurnMaster Unhandled Chisel with Carbide Square Tip (RSTM-SCT3)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way...