Robert Sorby Patriot Chuck Deep Grip Jaws 4.1/4"
RSJDG
Patriot Chuck Deep Grip Jaws 4.1/4"
Designed with deep sides to give extra grip on large logs and awkward pieces of wood.
They also have a large internal and external dovetail to securely hold large bowls in excess of 16" diameter.
Robert Sorby Bowl Reversing Jaws
RSJBR
Bowl Reversing Jaws
These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl.
Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.
Robert Sorby Patriot Wobble Chuck
RSWC
Patriot Wobble Chuck
An inexpensive introduction to off-centre or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring.
The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means.
It is then off-set by rotating the upper section of the Wobble Chuck.
Ideal...
Robert Sorby Patriot Chuck Pen Jaws
PBDJ
Patriot Chuck Pen Jaws
These Jaws will hold your pen blank central so you can drill on the lathe.
A groove in both jaws ensure you have a tight secure grip of the pen blank.
Mount your drill chuck into your tailstock and simply wind in the drill.
With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.
These...
Robert Sorby Faceplate Ring
FACERING
Faceplate Ring
Designed with an internal dovetail to fit securely on to the standard 2" (50m) jaws.
These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting.
Available with an outer diameter of 3 1/8" (80mm) and 4 3/4" (120mm).
Patriot Screw
RSPS
Parallel thread for extra grip, fits directly into 50mm jaws.
Also fits all NOVA chucks.
Robert Sorby Screw Chuck 1/4"
649
Screw Chuck 1/4"
An inexpensive mini screw chuck suitable for miniature projects that fits into the jaws of the Patriot woodturning chuck.
Robert Sorby Patriot Chuck Drive Centre
RSPDC
Patriot Chuck Drive Centre
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
Strong and durable design.
Robert Sorby Steb Drive
STBCHUCK
Steb Drive (LSTBCHUCK)
The Steb Drive uses the same innovatively designed head as the original Stebcentre.
The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.
It has a positive and secure location utilising the flats of the spigot.
Robert Sorby Eccentric Chuck
RS60N34
Eccentric Chuck
The Robert Sorby Eccentric Chuck is the most sophisticated chuck for multi-centre turning.
Ease and accuracy of adjustment (without removing the workpiece from the chuck) is provided by the unique offset boss which accommodates the three different driving components on which to mount your workpiece, viz:- 1- Screwchuck 2 - Ball drive and socket 3 - Faceplate The full system...
Robert Sorby Five Piece Bevel Edge Chisel Ash Handle Set
5169
Five Piece Bevel Edge Chisel Ash Handle Set (E1695ST)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby Traditional Bolster & Ferrule Chisel
F16906A
Traditional Bolster & Ferrule Chisel (F169)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby Five Piece Tapered Bolster and Ferrule Bevel Edge Chisel Set
E5305ST
Five Piece Tapered Bolster and Ferrule Bevel Edge Chisel Set (E5305ST)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are...
Robert Sorby Gilt Edge Tapered Bolster & Ferrule Chisel
530
Gilt Edge Tapered Bolster & Ferrule Chisel (F530)
Robert Sorbys Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Robert Sorby Registered Firmer Chisel
284
Thicker than conventional firmer chisels, registered chisels have the inherent strength to chop and lever out waste wood. Tapered from the shoulder to the cutting edge to give additional strength. Also suitable for less rigorous framing applications.
Robert Sorby Sash Mortice Chisel
331
Sash Mortice Chisel (F331)
Traditional design.
Heavy section makes it ideal for levering out waste wood from deep mortice for tenons, locks and hinges.
Special 2 degrees side taper prevents binding in the cut.
Fitted with Satinwood handle.
May be used with light blows from a mallet.
Overall length 11"
Robert Sorby Sash Mortice Chisel with Soft Grip Handle
332
Sash Mortice Chisel with Soft Grip Handle (F332)
Unbreakable plastic handle.
Same rugged specification as the 331 series.
Designed more for on-site work where heavier blows may need to be taken.
Fitted with a robust unbreakable plastic handle.
Overall length 11"
Robert Sorby Corner Chisel
F33310B
Corner Chisel (F33310B)
Designed for squaring up the ends of mortices, grooves or housings.
Faces are precision ground to produce clean, accurate 90 degree angles.
A beautiful tool to use, delicately balanced.
Nowadays often used to clean up after using a router.
Sharpen each face individually using an oil stone.
Fitted with a fine boxwood handle.
Overall length 9.5"
Robert Sorby Paring Chisel with Satinwood Handle
241
Paring Chisel with Satinwood Handle (F241)
Traditionally used by cabinet- and pattern-makers for shaving thin slivers of wood.
These paring chisels feature a long, flat, thin blade which tapers towards the cutting edge to give the finest of cuts when cleaning out grooves.
Normally used for hand paring with one hand on the handle and the other controlling blade.
Bevels on the top face enable...
Robert Sorby Heavy Duty Framing Chisel
285
Heavy Duty Framing Chisel (285)
Long (10.1/2"), thick blade designed for large framing work when working with deep mortices where extra strength is required.
Blade tapers along its length.
The Heavy Duty Registered Chisel is fitted with ash handle.
Made with high quality High Speed Steel.
Available in 3 sizes.
Overall length 19.5"
Robert Sorby Chisel Edge Guard
F285EG25
Chisel Edge Guard (F285EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 1", 1 1/2" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
Robert Sorby Heavy Duty Bevel Edge Framing Chisel
286
Heavy Duty Bevel Edge Framing Chisel (F286)
A large framing chisel. Designed to handle the rigours of deep heavy duty work.
Side bevel enables under-cutting.
Similar to the 285 Framing Chisel but with a bevel to give extra clearance in the cut.
Tapered along the length.
Fitted with a heavy duty Ash handle.
Overall length 15.5"
Robert Sorby Heavy Duty Corner Chisel
28725
Heavy Duty Corner Chisel (F28725L)
The Robert Sorby Heavy Duty Corner Chisel is also known as a ‘bruzz’ this rugged chisel will withstand the most demanding applications.
Heavy duty version of the popular cabinet makers corner chisel.
Milled from a solid 1" section it is designed for cleaning up corners in timber framing projects.
Sharpen each face individually using an...
Thread Cutting & Eccentric Chuck DVD
RSDVDTCEC
50 mins.A unique instructional DVD showing you how to form internal & external threads.This is a must for anyone making an initial attempt to cut threads on turned projects.Several projects are shown in depth.
Robert Sorby Slick
289
Slick (F289)
This heavy duty timber framers and boat builders slick has an offset blade to allow for clearance when working deep sockets and mortises, also used as a heavy duty paring chisel with no limits to reach due to it's cranked neck.
Made from a special carbon alloy steel for a perfect combination of hardness and toughness. This ensures a razor sharp edge with outstanding edge retention.
This...
Robert Sorby Slick Edge Guard
289E
Slick Edge Guard (F289EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 60mm and 85mm, these tough leather guards are a snug fit for the Slicks (289)
Robert Sorby Slick Holster
289H
Slick Holster (F289H)
Purpose made leather holster for the Robert Sorby Slick (289).
The holster is especially useful when working outdoors.
Robert Sorby 10" Bent Draw Knife
F56600R
10" Bent Draw Knife (F56600R)
Draw Knives are one of the oldest woodworking tools around and were used in many occupations from Wheelwrighting to Coopering.
In the hands of a skilled craftsman these tools can be used to create massive roughing and shaping cuts or deft finishing cuts.
Nowadays they are still used in chair and cricket bat manufacture.
They are also an essential part...
Robert Sorby 10" Draw Knife
F56500R
10" Draw Knife (F56500R)
Draw Knives are one of the oldest woodworking tools around and were used in many occupations from Wheelwrighting to Coopering.
In the hands of a skilled craftsman these tools can be used to create massive roughing and shaping cuts or deft finishing cuts. Nowadays they are still used in chair and cricket bat manufacture.
They are also an essential part of any...
Robert Sorby Cabinet Scraper
K1600XX
Cabinet Scraper (K1600)
A popular addition to any discerning cabinet maker's tool kit, these hand held scrapers smooth down rough edges quickly and easily.
Made from the best quality carbon steel the simple design of these tools belies their incredible effectiveness and designed to finish flat surfaces to the very highest standard.
Available in three sizes:
4 x 2"
5 x...
Robert Sorby ProEdge Angle Set
WPROSET
ProEdge Angle Set
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset (PROSET).
Place the gouge into the clamp of the profile arm and extend the gouge up-to the required stop and lock it into place.
This will allow for precise and repeatable bevel angles to be obtained every time.
Robert Sorby ProEdge Short Tool Platform with Arm
PESPC
ProEdge Short Tool Platform with Arm
Accurately ensures a straight cutting edge on any woodworking chisel.
The short tool platform is considerably reduced in depth compared to the standard tool platform to allow tools with short blades to reach further onto the belt.
Robert Sorby ProEdge Fingernail Profile Arm Only
PEFPARM
ProEdge Fingernail Profile Arm Only
The fingernail profiling arm can be used with the WPEFPBOSS to shape those perfect fingernail sweeps on bowl and spindle gouges.
This item is also available as a set WPEFPKIT, containing the arm and the boss.
Robert Sorby ProEdge Knife Jig
PEKJIG
ProEdge Knife Jig
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.
The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.
The jig...
Robert Sorby Jig Adaptor Table
447JAT
Jig Adaptor Table
A slotted table to fit onto the Robert Sorby Universal Sharpening System to take a range of sharpening jigs.
The four nut and bolts hold the table in place and additional jigs can be added to assist in sharpening various woodturning and woodworking chisels and gouges.
Robert Sorby ProEdge Tip Holder
472
ProEdge Tip Holder
The ProEdge Tip Holder is double ended to allow the user to comfortably hold small cutters and tool tips without the worry of catching fingers.
Easily secure hard to grasp tool tips.
Holds the cutters of the RS200KT (Multi Tip Hollowing Tool), RS230KT (Hollowmaster) & B86800W (Micro Shear Scraper).
Sturdy and durable design.
ProEdge Fingernail Profile Kit
PEFPKIT
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges. This set contains the arm and the boss but both items are available individually.
Robert Sorby ProEdge Long Grind Jig
WPELGJ
ProEdge Long Grind Jig
The Long Grind Jig (PELGJ) can be used in conjunction with the Robert Sorby Fingernail Profiler or the Robert Sorby ProEdge.
It allows for three different types of profile to be produced on bowl and spindle gouges.
It will produce a fingernail profile, a long grind and an extra long grind depending on which location hole the profile arm is placed.
It fits onto the...
Robert Sorby ProEdge Knife Holder
PEKH
ProEdge Knife Holder
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.
The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.
The...
Robert Sorby ProEdge Pigtail For Mop
PEPIG
ProEdge Pigtail For Mop
Pigtail mandrel accessory to fit the ProEdge Sharpening System.
Used to mount a buffing wheel onto the ProEdge.
Buffing wheel is not included.
Robert Sorby ProEdge Skew Jig
PESKEW
ProEdge Skew Jig
Accessory for the Robert Sorby ProEdge Sharpening System.
Used for the accurate sharpening of woodturning skew chisels.
Robert Sorby ProEdge Square Guide
PESQ
ProEdge Square Guide
Accurately ensures a straight cutting edge on any woodworking chisel.
Robert Sorby ProEdge Table & Arm
PETA
ProEdge Table & Arm
Replacement part for the Robert Sorby ProEdge Sharpening System.
Robert Sorby Pig Tail Mandrel
W491
Pig Tail Mandrel (W491)
The Pigtail mandrel is used for mounting a Buffing Mop to the Sandmaster.
Robert Sorby ProEdge Profile Boss only
PEFPBOSS
ProEdge Profile Boss only
The fingernail profiling kit is ideal for shaping those perfect fingernail sweeps on bowl and spindle gouges.
This product contains boss only.
Robert Sorby ProEdge V Block
PEVB
ProEdge V Block
Allows easy sharpening of bowl and spindle gouges with a standard grind as well as spindle roughing gouges.
Robert Sorby ProEdge Diamond Belt
PEDIA
Diamond belts offer the pinnacle in abrasive technology, providing durability and flexibility. Diamond particles are precisely graded to give a long-life solution and are excellent for sharpening the most difficult of materials. They also provide a great all-round alternative and are suitable for any material.