A4 Rectangle
J10186
Like an A4 piece of paper but made out of wood!
The perfect blank to start practising the art of pyrography. Sand with abranet sheets before burning for best results.
Mixed Set of Knife Points (Pack of 3)
PYROCSKNIFEMIX
New to the Peter Child range of pyrography accessories; a mixed set of Knife Points.
Ebonising Lacquer Spray
CEL
A quick drying pigment acrylic lacquer designed to coat most timbers to mimic the classic look of ebony in an easy to use aerosol to ensure a smoothly finish.
GlassCast 10 Casting Resin
G10
GlassCast 10 is suitable for Smaller Castings up to 10mm thick, such as jewellery.
GlassCast 10 is a water-clear, UV resistant clear casting resin developed for smaller or thinner castings such as jewellery, 3D resin-art, gaps/knots/wood inlays and more. It can be used to make parts up to around 10mm thick in a single pour.
Because GlassCast 10 has been developed as a casting resin and not a...
Pen Blank - Kingwood
KPB
Approximate measurements 5/8' x 5/8' x 125mmColour and grain pattern may vary from pictured sample, due to this being a natural product.
Crank Top - Salt Mill Project Kit
CTSM
Crank Top Salt Mill Project Kit
Create your own perfectly sized Crank Top Salt Mill for tabletop use to deliver freshly ground salt from a light dusting to coarse grind.
Crank Top Mills are also ideal for grinding spices for added flavour and aroma.
3" shaft Low profile for table use
Easy to adjust from fine to coarse
Non-corrosive ceramic mechanism
Fully adjustable grind
Forstner...
Bottle Opener
BOCN
This bottle opener makes an attractive gift and the handle is simple to turn between centres.
Please note, the timber is not included. The image is an example of what you could create with the kit.
NOVA Chuck Insert
NOVAI
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded). The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
Micro Mesh Pen Finishing Kit
MMPK
Designed specifically with pen turners in mind.
This finishing kit consists of nine different, colour coded, foam backed sanding pads measuring 2" x 2".
Grits range from 1500 through to 12000.
Highly recommended for natural woods.
Cellulose Thinners
CCT1
High quality pure thinners for cellulose based products and Spirit Stain.
This pure cellulose solvent is a high quality dilutant for Chesnut Products cellulose based products, such as Cellulose Sanding Sealer and Melamine Lacquer. Thinning these products can help to make them easier to apply, especially over larger areas as it helps them flow out.
Cellulose Thinners is also useful for cleaning...
Xylia
XYL
The heartwood is dark red with darker purple brown streaks and lighter curly parenchyma bands.It is extremely durable and being a busy timber it makes for interesting turning options.Tools need to be sharp and it sands to a fine finish, takes varnish and glues well.Used for turning and carving.
Pen Blank - Xylia
XPB
The heartwood is dark red with darker purple brown streaks and lighter curly parenchyma bands.It is extremely durable and being a busy timber it makes for interesting turning options.Tools need to be sharp and it sands to a fine finish, takes varnish and glues well.Used for turning and carving.Approximate measurements 5/8' x 5/8' x 5'Colour and grain pattern may vary from pictured sample, due to this...
Leadwood
LEAD
The heartwood is dark brown in colour with blackish streaks. The timber is hard, heavy and durable. It sandpapers well and takes varnishes and oils well to come up with a high lustrous finish. It needs sharp tools. It is difficult to use for furniture but is well suited to turning and carving and has even been used for machine bearing. The wood is so hard that Africans made blades for their hoes before...
Acrylic Sanding Sealer
CASS
This water based sanding sealer gets the job done without the smell associated with solvent based sealers and also with no flammability issues – ideal for asthma sufferers and anyone with an aversion to solvent based finishes.
Applied by cloth, foam brush or spray, the sealer dries in about 5 minutes and can be overcoated with most compatible finishes after about 20 minutes. Please note that...
Pen Blank - Union Swirl
APB54
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern may vary slightly from the pictured blank, due to the manufacturing process.
Food Safe Finish
FSAFE
If you are producing wooden items that will be in contact with foodstuffs this is the finish for you.
A clear, food grade finish it is ideal for fruit and salad bowls, cheese and chopping boards and other wooden vessels. It dries to a satin finish with a high degree of water resistance which will withstand wiping with a damp cloth.
Up to three coats are recommended. If the oil sits on the surface...
GlassCast 50 Clear Casting Resin
G50
GlassCast 50 is suitable for Thick Castings up to 50mm thick.
GlassCast 50 is a water-clear, UV resistant epoxy casting resin developed specifically to meet the demands of thick section casting - especially in contact with wood - making it the ultimate 'river table' epoxy.
Its slow-curing formulation allows it to be poured in depths of up to 50mm (25mm into wood) per layer without overheating.
Recommended...
Seam Ripper Kit
SEAM
Project Kit
Featuring the new Deluxe Japanese seam ripper blades, sharper, more durable and most functional blades yet. We've loaded this easy 8mm project with great features and utility. The kit includes sharp, durable manganese steel. Includes 2 reversible blades in large and small sizes. The blades are also removable and reversible for protection and storage.
Please note, the image is...
Pewter Lid - Ornate
PL38
Pewter lid with an ornate design.
Perforated pewter potpourri lid for your woodturned bowl
Designed to fit an 80mm diameter aperture
Basswood Country Plank
BPLANK
Walnut Hollow Basswood Country Plank. This unique bark edge surface is ideal for pyrography, hot stamping, and wood carving. Kiln dried and naturally untreated.
Due to the nature of the product, the height, shape and grain of individual planks will vary. Size is approximately 9" to 11" wide and 13" long.
Made in America.
Pen Blank - Panga Panga
PPPB
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, in Mozambique.
Its dark colours, with rich parenchyma bands brings a touch of exotic to finished pieces.
The heartwood is extremely durable.
It sandpapers well and takes varnish and oils well.
It is used in furniture, turning, parquet flooring and carving.
Approximate measurements 5/8" x 5/8"...
Pen Blank - African Blackwood
ABPB
Approximate measurements 5/8" x 5/8" x 5"
Colour and grain pattern may vary from pictured sample, due to this being a natural product.
African Blackwood Bells
AFBB
African Blackwood is very strong and tough in all categories, but is not normally used for steam bending due to its weight and density. It has a severe blunting effect in tools, Tungsten-carbide-tipped tools are required for conversion. It can be difficult to work but turns well. Pre-boring is necessary for nailing and screwing, and screw threads can be tapped into it almost as well as in metal. It...
2" - 50mm - Watch Insert - Gold bezel White Face
TPC50G
A 50mm 2' watch insert.It has a white face with a gold outer rim and is fitted using a small rubber band (which can be removed).Requires SR626SW battery.
Peter Child Pyrography Pen Splitter
SPLITTER
Designed for use with the Peter Child Artist’s Pyrography Machine: two pen flexibility at the flick of a switch.
Pen Blank - Caribbean Swirl
APB44
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern may vary slightly from the pictured blank, due to the manufacturing process.
Pewter Lid - Rosehip
PL37
Pewter lid with a fruity, floral rosehip design.
Perforated pewter potpourri lid for your woodturned bowl
Designed to fit an 80mm diameter aperture
Nutcracker - Brass Ships Wheel
NC02
This Ship's Wheel is an ingenious way to crack a nut: place it in the vice and turn the wheel until the shell cracks without damaging the kernel.
Made from solid brass and when combined with a turned bowl makes a perfect gift.
Base diameter: central circle measures 1.5cm and base measures 5cm.
Project kit includes brass ships wheel only. Wooden bowl as shown in image not included.
Solid...
Christmas Tree
J10174
Decorate your own wooden Christmas tree! Design and personalise to make a unique gift for yourself or a loved one.
Size: 10cm height
Razor Kit
RAZOR
Project Kit
This new, handsome razor kit is a premium quality razor with excellent feel and balance.
This razor has chrome plated head fittings which are highly polished and the razor accommodates any Gillette Mach 3 style refill. Please be aware that a razor refill is not included.
Please note, the image is an example of what you could create with the kit.
In addition to this kit, you...
Drawstring Pen Pouches - Pack of 10
DSBPP10
These beautiful drawstring pen pouches are the perfect finish to any pen or pencil.
Safety Cloths
CSC
A woven paper sheet ideal for lathe work as it easily tears if caught in moving parts.
Thicker than kitchen towel it stays wet longer, allowing an even application.
It retains its shape and strength, even when wet.
Supplied in packs of 3 or 10.
Keyring Whistle
KW23
An attractive and practical item for a personal safety aspect with the high pitch sound produced from the whistle as well as keeping keys safe.
Can be made using a standard pen mandrel.
Turners Retreat Woodturning Smock
SMOCK
This zip fronted smock has two generous back pockets to keep items safely out of the way but always close at hand. There is also a left sleeve pencil pocket.
Velcro cuffs and neckband give added comfort. These smocks allow for a sweater to be worn underneath during winter whilst remaining cool in summer.
Sizes available:
Medium: 48" chest
Large: 50" chest
X Large: 52"...
Back Scratcher Kit
BSK
This gold plated back scratcher is a must for everyone.
Extremely practical and a joy to use! Turn a handle to the desired length and enjoy this unique aid.
Supplied with a threaded end cap and leather hanging lace.
Please note, this product comes as a kit and you must turn your own handle before assembling.
Titebond III Ultimate Wood Glue
TITEBIII
Offers the best possible performance in woodworking glues.This waterproof formula provides a superior bond strength, longer open assembly time and a lower application temperature.The perfect choice for interior and exterior woodworking.
Pentacryl Preservative
PE
Pentacryl is a wood stabiliser used by woodcarvers, woodturners, builders, furniture makers and anyone working with green, fresh cut wood to prevent it from cracking, checking and splitting during the drying process.
Pentacryl is a non-toxic compound of modified polymers designed to prevent the cracking and splitting of green wood during the drying process. It displaces the water and leaves a thin...
Pewter Lid - Flower Basket
PL5
Pewter lid with a flower basket design.
Perforated pewter potpourri lid for your woodturned bowl
Designed to fit an 80mm diameter aperture
Colour Grain - Night Fire
CGPB3
These striking wood blanks are made from resin impregnated dye and laminated coloured hardwood veneers. Your completed project will have a brilliant finish, strong grain and a very unique appearance.
Colour and pattern may vary slightly from the pictured blank, due to the manufacturing process.
Approximate measurements 5/8" x 5/8" x 5"
Magnifying Glass
MAG
This quality magnifying glass with a 2.1/2" (63mm) lens with a 2x magnification and solid brass bezel makes a super gift when combined with a handle turned by you from a figured piece of wood.
It can be made using a standard pen mandrel.
Timber not included.
Please note, the image is an example of what you could create with the magnifying glass project kit.
Router Mat
TRRMAT
Non-slip router mat.
A high friction mat with an open weave to allow dust and chips to fall through.
Ideal to hold work for routing, sanding or carving - leaving your hands free!
Size: 24" x 36"
Pewter Lid - Butterfly Wings
PL19
Pewter lid with a beautiful butterfly design.
Perforated pewter potpourri lid for your woodturned bowl
Designed to fit an 80mm diameter aperture
Desk Letter Holder
DC1
Made of gold plated spring steel, this makes an attractive and practical item for keeping memos and letters together.
Pen Blank - Whisky
WHPB
Reclaimed oak from a whisky cask.
These pen blanks are made from the staves of a barrel that was used for storing whisky.
Approximate measurements 5/8" x 5/8" x 5". Due to the curve in the barrel, each blank can vary slightly in size.
Colour and grain pattern may vary from pictured sample, due to this being a natural product. Pen kit not included.
Rainbow Colour Spirit Stain
CSSTAIN
A quick drying wood dye manufactured with high grade FADE resistant materials.
Can be intermixed for colour matching or thinned using cellulose thinners for delicate wash effects.
Spirit stain is also suitable for mixing with cellulose sanding sealer and melamine lacquer up to a suggested 10% to make your own tinted finishes.
All stains are in a 250ml bottle.
A sample pack is also available.
7mm Premium Twist Pen with Decorated Band
DP
Project Kit
Twist pen with a decorative centre band and a tapered ball end clip. Pen in image is turned using pen blank, Carribean Swirl (Ref APB44)
Please note, the image is an example of what you could create with the kit.
In addition to this kit, you may also need:
a pen blank
7mm bushing set
7mm drill bit