NOVA Comet II Bed Extension (Grey)
Fits the NOVA Comet II Midi Lathe. This unit enables the spindle length of the NOVA Comet II Lathe to be expanded.
Each extension adds 23.4″ in length to the lathe (the standard NOVA Comet II Midi Lathe lathe comes with 16.5″ between center length) Made from solid cast iron for long life and maximum strength and rigidity.
Adds 24.6″ length to your NOVA Comet II Lathe
Solid...
Odie's Dark Wax
ODWAX250
Odie's Dark Wax
Odie’s Dark Wax is a rich dark finishing traditional hard wax containing natural oxidizing oils that darken wood not only when applied, but also as wood ages as well as adding contrast and patina. Use alone or in combination with other Odie’s products to add polish and sheen.
The depth and rich patina are such that similar results cannot be achieved with a stain....
Wire Brush 50mm x 6mm Shank, 0.30 Wire
FAIWBS50C
Faithfull Wire Brush 50mm x 6mm Shank, 0.30 Wire
This Faithfull Wire Brush is perfect for cleaning metal surfaces prior to welding or painting. It is circular, with a 0.3mm crimped steel wire finish. It has a 6mm shank and will operate with power tools of up to 4500rpm.
Size: 50mm diameter x 6mm shaft x 0.3mm wire size. Conforms to ISO9001 & DIN EN1083-1 and 2.
Key Features
Perfect...
Titan III 5.75" Deep Grip Jaw
13040
Titan III Jaw Deep Grip Jaw Set
3 Screw Hole Mount ONLY designed to fit Nova Titan III chuck
Huge 5-3/4" Jaw designed for turning very large work
A great compliment to the 5" Powergrip jaws that come with the Titan III chuck
Pouch & Belt for K1030
A-KC300
Lightweight woven nylon carrying pouch has pockets for securing new Portable Micromotor Control Unit and Handpiece. Pouch is optional and is NOT included in Kits K.1030 or K.103018. Comes empty.
Pre-Filter for Razaire Mini (Pack of 2)
XF105
Pre-Filters for the Razaire Mini X60 (Pack of 2)
Created for Pyrography Artists.
For the most effective smoke reduction replace filters regularly. Recommended replacement interval for the Pre-filter is approximately every 25-50 hours of burning if you burn hot and generate lots of smoke, and approximately every 50 hours if you burn more moderately.
Primary Filter for Razaire Mini
XF102
Primary Filter for the Razaire Mini X60
The Razaire MINI can still be used as a fan to draw air away from your burning surface even if the filters are removed or no longer effective. The Primary Filter should be replaced every other time you replace the Pre-filter. This works out to roughly 50-100 hours between Primary Filter changes.
This is a basic guideline only. You may find that you want...
Razertip Large Chisel Shader Tip
TH6LC
Razertip Large Chisel Shader - Tip Only
It is useful for general shading applications. It is also used for crisp, straight-shaded edges, 45-degree corners, simulating shingles, etc.
The tip-only option will only work with the Binding-Post Interchangeable-tip Pen #BPH. A heavy-duty cord is recommended.
Four Piece Wood and Metal Cutting Oscillating Blades Set
TREC-M4SET
Four Piece Wood and Metal Cutting Oscillating Blades Set
Set of 4 oscillating multi-tool blades, manufactured from high quality high carbon steel for strength and durability. Each blade features a universal fitting suitable for most corded an cordless multi-tool oscillating machines.
Set contains:
34mm HCS blade for wood and plastic
34mm HCS Japanese tooth blade for wood, plasterboard...
7 Piece Wood and Metal Cutting Oscillating Blades Set
TREC-M7SET
7 Piece Wood and Metal Cutting Oscillating Blades Set
Set of 7 oscillating tool blades, manufactured from high quality high carbon steel for strength and durability. Each blade carries a universal fitment suitable for most corded and cordless multi-tool oscillating machines.
Set contains:
34mm HCS blade for wood and plastic
34mm HCS Japanese tooth blade for wood, plasterboard and plastic
68mm...
Robert Sorby 8" Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
Robert Sorby 10" Bent Draw Knife
F56600R
10" Bent Draw Knife (F56600R)
Draw Knives are one of the oldest woodworking tools around and were used in many occupations from Wheelwrighting to Coopering.
In the hands of a skilled craftsman these tools can be used to create massive roughing and shaping cuts or deft finishing cuts.
Nowadays they are still used in chair and cricket bat manufacture.
They are also an essential part...
Rails and Crossing Mechanical Model Kit
UGRC200
Where there’s a railroad there’s a crossing, and this kit includes both. You’ll get 4 meters of track and a crossing complete with stop signs and barriers that raise and lower at the touch of a lever. - Size Model: 160 x 4.7 x 8.8 in - Number of components: 200
Bass Peel-Off Stencil Set
STBASS
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
Robert Sorby TurnMaster Handled Chisel with Detail Carbide Cutter
RSTM-HCT2
TurnMaster Handled Chisel with TCT Detail Cutter (RSTM-HCT2)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way...
Robert Sorby Small Ultima Link
SOV-ULTLS
Small Ultima Link (SOV-ULTLS)
Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber.
The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The...
Beeswax Three Pack Gift Box
BEEBOX
Clapham's Beeswax Three Pack Gift Box
The Clapham’s Trifecta
Enjoy a three pack gift box of the products that “made Clapham's famous”. These signature products in 50g sizes include Beeswax Salad Bowl Finish, Beeswax Polish, and your choice of Beeswax Leather Dressing or Beeswax Hand Cream, all packed in a convenient and compact box.
A perfect gift for the crafters...
Lightning Peel-Off Stencil Set
STLIG
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
NOVA Neptune Outrigger
55266
NOVA Neptune Outrigger
This outrigger allows you to turn up to 20″ diameter platters and bowls in the outboard mode.
Made from solid cast iron, providing rigid strength and stability.
Arms are easy to articulate and the camlocks make it fast and easy to move into position and lock.
Size: Length 20.5″ (520Mm) x Width 4.7″ (120mm) x Height 14.2″ (360mm)
Weight:...
Razertip P88 Pyrography Base Unit
P88-GB-PS
Razertip P88 Pyrography Unit (Power Supply Only). You will require a pen to use the P88 power supply. There is no pen included in the box, only available to buy separately.
Shark Peel-Off Stencil Set
STSHK
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
NOVA Dome Jaw Set
TR6091
The NOVA Mini Jaws are ideal for use with mini and midi lathes, and are capable of holding work below the size handled by the 25mm (1″) jaws. They are designed to securely hold small bowls up to 6″ in diameter, and small, free-end spigot turnings up to 5″ long. They can be used in expansion mode for bowls, or in contraction mode for spigots. Made from K1045 medium tensile carbon steel...
Tormek - Centering Knife Jig
KJ-45
Get sharp and get even with the Tormek KJ-45 Centring Knife Jig. It works with both Tormek T-4 and Tormek T-8 machines, as well as older models.
Using the KJ-45 you can achieve symmetrical bevels with the same angle on both sides of your knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thick utility knife, you'll get the...
Robert Sorby Micro Cranked Tool 3/16"
B87706W
Micro Cranked Tool (B87706W)
The cranked tool is ideal for taking the undercuts required in miniature hollowing work.
Use in combination with the Hook tool to create some unbelievably small hollow forms.
Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
Lifetime HSS Guarantee.
1" Mini-Draw Knife
KN17
This miniature draw knife is designed for hard-to-reach areas, where a pulling action is more conducive to efficient stock removal. The shank allows the cutting angle to be changed easily for contoured cuts.
Razertip Heavy Duty Lamilae Maker Tip
TH3
Razertip Heavy Duty Lamilae Maker - Tip Only
Specialised pen for forming the lamilae, or tooth-like serrations on duck bills.
Will only work with the Binding-Post Interchangeable-tip Pen #BPH.
Heavy duty tip only.
Razertip Burnishing Tip
T8B
Razertip Burnishing Tip - Tip Only
Useful for burnishing bird bills and hooves on animal carvings. Can also be used as a very strong general pyrography tip. Excellent on leather.
The tip-only option will only work with the Binding-Post Interchangeable-tip Pen #BPH.
A heavy-duty cord is recommended. Our brass brush is perfect for cleaning these tips.
Ten Piece Jigsaw Blade Set for Wood
TREPT-W10
Ten Piece Jigsaw Blade Set for Wood
10 piece Jigsaw blade set for cutting wood with a power jigsaw blade.
Unrivalled cutting speed and life and can tackle almost all cutting tasks using a power jigsaw
A range of different TPI and lengths available for cutting different thicknesses and types of wood, laminate, plastics
Packed in a convenient plastic case for blade storage
Manufactured...
Compact Double Motor Wall Mounted Extractor
CGV286-3WALL
This compact wall mounted machine has a large 150 litre capacity and is ideal for serving extraction systems in smaller workshops. The waste is collected in reusable bag which is fitted to the exterior of a strong steel cage to retain its shape. The cyclonic neutral vane theory technology draws the waste into the drum with great force and directs it around the outside edge, keeping the filters cleaner...
Robert Sorby 22” Traditional Sorby Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
Robert Sorby Traditional Bolster & Ferrule Chisel
F16906A
Traditional Bolster & Ferrule Chisel (F169)
Robert Sorby's Sheaf River range incorporates all the hallmarks of traditional craftsmanship evident in all our chisels.
With handles made in resourceful and tough American Ash the range includes our first butt and skew chisels, as well as our ever popular tapered and traditional styles.
The shorter butt chisels are popular in the USA and...
Detail Knife Set
KN400
Flexcut have put together the perfect package to get you started in carving with knives.
These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use.
The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue.
Set includes:
KN12 - Cutting Knife
KN13 - Detail Knife
KN14 - Roughing Knife
a...
Red Maple Infil Stencil Set
STIRM
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
Black Acrylic Pen Stand (12 Pen Display)
PKS12B
Help your prized pens catch the eyes of any would be buyer with these rich glossy Black Acrylic Pen Display Stands. This pen stand will help provide a striking contrast for both light and dark acrylic or wood.
Pens not included.
English Oak Peel-Off Stencil Set
STOAK
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
Porpoise Peel-Off Stencil Set
STPOR
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
Support Arm for T7
US-105
An extra Universal tool support for your T-5 can be a very useful addition, allowing quick interchange between the horizontal and vertical mounting positions, especially if it is preferable to save a particular set up.The US-105 features a micro adjuster making for smoother and easier operation and offering an accurate method to find and replicate an edge angle.This is an excellent upgrade for an older...
Stars Peel-Off Stencil Set
STSTR
Nick Agar has used stencils and made his own for many years creating and teaching woodworking and decorating techniques. Chroma Craft has worked closely with Nick to develop the design and detail to produce just the right shape and size to suit his artistic style. The Stencil material is specially formulated for use with low saturation solvent or acrylic paints. The self-adhering film is flexible,...
Odie's Dark Butter
ODB250
Odie’s Dark Butter
Odie’s Dark Butter, a rich dark finishing “butter”, contains natural oxidizing oils that darken wood not only when applied, but also as wood ages. It will also add contrast and patina with age. It can be used alone or combined with other Odie’s products to add polish and sheen.
The depth and rich patina are such that similar results cannot be achieved...
Odie's Super Penetrating Oil
OSP900
Odie's Super Penetrating Oil
An environmentally friendly, non-toxic, extraordinary finish and stabilizer which is effectively a thinner version of Odie’s Oil. It is an easy to apply formulation for difficult, uneven, large areas or rough surfaces.
It can be used on wood, stone, concrete, clay, slate, brick, metal, plastic and leather. It waterproofs, rustproofs, rejuvenates, restores,...
Robert Sorby Sovereign Ultima Head - No Cutter
SOV-ULTMHEAD
Ultima Head without cutter (SOV-ULTMHEAD)
The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal.
Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel.
The multi- variable configuration head and link system allows the tool to be used in a variety of...
Robert Sorby Main Handle for Deep Hollowing Tools
RS202
This pistol shaped support is one of two handles available to support the Robert Sorby deep vessel hollowing tools.
These include:
The Hooker (RS210)
The Slicer (RS205)
The Chattertool Shank (RS215)
The Articulated Probe (RS213C)
The Arm Brace (RS206) is the other handle for these tools and provides additional support along the woodturners forearm.
Saw Tooth Setter
TR94-370R
Eclipse Saw Tooth Setter
Used for setting teeth on resharpenable woodsaws.
7.1/4"(184mm) overall length
Powder coated metal head
Nickle plated anvil
Soft feel rubber handle grips
Knurled adjustment screw for increased torque/
Painted metal head and nickel plated anvil for rust resistance
Metal handles for extra strength and durability
Soft feel, non-slip rubber handle grips...
Sundström P3 Particulate Replacement Filter
H02-1312
One Sundström P3 Particulate Replacement Filter
Sundström P3 filters are compatible with all Sundström’s masks - whether they are half-face, full-face or powered respirators.
Designed for use with the Sundström range of half-face and full-face respirator masks, this SR 510 P3 R particulate filter offers respiratory protection against fine dusts and fumes, as well as...
Robert Sorby Select Framing Square 610mm (24") x 400mm (16")
RS-FS610X400
Thick, carbon steel blade for strength, rigidity, and durability.
Etched metric and imperial graduations for versatility.
Popular conversion tables for user convenience.