Robert Sorby Continental Spindle Gouge
B839082
Continental Spindle Gouge (839H)
Originating from Europe, these tools have gained a reputation for their superb handling qualities on spindle work.
Being a forged construction, they have an even wall thickness, thereby increasing finesse without compromising strength.
Lifetime HSS Guarantee.
Pen Blank - Cheese Burger
APB95
Cheese Burger Acrylic Pen Blank
Shimmering burger-like colours with iridescent effect
Can be easily turned
Approximate measurements 3/4" x 3/4" x 5"
Colour and pattern will vary slightly from the pictured blank due to the manufacturing process. No two are the same, making each pen you create completely unique!
Robert Sorby Oval Skew
809H
Oval Skew (809H)
The Robert Sorby Oval Skew Chisel is a delicately balanced tool.
Originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest.
This tool will smooth cylinders, clean the end grain of spindles, cut hallow curves beads, pummels and v-cuts e.g. star balustrading and chair legs.
The...
Finishing Oil 250ml
FO250
A blend of high quality oils which nourish and enhance the colour of the wood.Provides a hard wearing and water resistant surface.Heat, alcohol and food acid resistant.Interior use only.Toy Safe.
Razertip Heavy Duty Cord
CORD1HD
Razertip Heavy Duty Cord
Razertip heavy-duty #1 cord for Razertip burners and pens, one male connector on each end. Also allows use of Razertip pens on other power supplies using an RCA connector.
1M (39") long.
Heavy-Duty cords (red plugs) use a 16-gauge cord for maximum current flow. For fastest tip heat recovery the heavy duty cord is recommended. Any of the Razertip pens work on...
Bushing Set for Round Top Rollerball & Fountain Pen
BUSH5
Bushing Set for Round Top Rollerball / Fountain Pen (Ref ESR / ESF)
One-Sided Hand Sanding Block
ABSBH
Shaped one-sided hand sanding block for 70 x 125mm abrasive sheets.
Make sanding easier with this lightweight hand sanding block. Simply apply a sheet of abrasive to the block and away you go!
Sanding block with hook and loop pad
Lightweight and comfortable to hold
Very efficient hand sanding without putting pressure on your fingers
Single-sided version only
Suitable for many applications,...
Mix Pack Of Dalmann Pen Blanks (5 Pack)
DMPB
Mix Pack Of Dalmann Pen Blanks (5 Pack)
Includes one of each of the following wood species:
African Blackwood
Xylia
Tamboti
Mopane
Chacate Preto
Approximate measurements 5/8" x 5/8" x 5"
Colour and grain pattern may vary from pictured sample, due to this being a natural product.
NOVA 70mm Mini Jaws
JS70N
Perfect for bowl and spigot projects. Expanded dovetail and reverse dovetail holds for gripping footed bowls.
Made from K1045 steel
The standard Woodworm Screw (included with Nova chucks) can be used with these jaws.
Designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength.
Special Nova dovetail profile. Designed for maximum strength...
Robert Sorby Round Nose Scraper
820H
Round Nose Scraper (820H)
Used on bowls and platters to create smooth flowing curves.
Lifetime HSS Guarantee.
Bushing Set for Over & Under Shotgun Pen
BUSH54
Bushing Set for Over & Under Shotgun.
Simply use this bushing set on the mandrel to turn your blanks to the correct diameter.
NOVA Comet II DR Lathe with G3 Chuck
46404
If you would like to view our machinery in person, please call 01302 744344 to book an appointment with our team.
Pen Press
PP4701
Quickly and easily assemble pens and projects of all sizes with the spring loaded Milescraft® Turners Press.Spring loaded, self-feeding mandrel holds objects in positionFlip up stanchions for quick mandrel length adjustmentSteel handle with ergonomic grip delivers up to 300 pounds of forceWide base flange for easy bench top installationMicro adjustable press pad for fine-tuned length adjustmentsQuality...
PRO-TEK G3 Chuck Only
G3PT
The new and improved PRO-TEK G3 chuck is an upgraded version of the popular NOVA G3 chuck. The chuck body is finished with a high-quality coating for a rust-resistant surface. This means that the G3 chuck is particularly suitable for wet wood turning. The powerful gearing grip delivers tremendous slide holding power offering solid, vibration free performance, each time you turn.
The PRO-TEK series...
Bushing Set for Cigar Pen
BUSH6
Bushing Set for Fat Cigar Pen - Product Code: FCP
Simply use this bushing set on the mandrel to turn your blanks to the correct diameter.
NOVA Soft Grip Jaws
6021
NOVA 6021 Soft Chuck Accessory Jaw Set an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. The NOVA Soft Grip Jaw Set is a unique set made from soft nylon that the user can cut, mold and customise to their requirements for special work holding. These provide markless holding – the nylon material holds most...
Robert Sorby Internal Shear Scraper
826
Internal Shear Scraper (826)
Shear scraping is a recently enhanced method of woodturning which relies on the presentation of the scraper at a shear angle.
This technique offers some significant advantages over conventional scrapers.
At the optimum angle of 45 degrees, the sliving action is safer and produces a superior finish.
Sanding is often unnecessary.
The risk of the cutter digging-in...
Crafters Acrylic Paint
DADCA01
Versatile and non-toxic, the DecoArt Crafter's Acrylic range is a great choice for all kinds of crafty ideas!
Make your projects stand out with this fantastic craft paint, designed especially for the discerning creative! When you're looking for bold and even coverage, this paint helps you every step of the way.
With your brush or sponge, apply this paint against a wide range of surfaces,...
NOVA 12" Large Cole Jaws
6040
NOVA Large Cole Jaw Set has 12"/304mm bowl diameter capacity. An accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications.
Please note: Due to sizing, only the SuperNOVA2 and Titan chucks are compatible with these jaws. NOVA 6040 Large Cole Jaw Set is a versatile set, designed for the re-chucking of bowls to remove...
Robert Sorby ProEdge Square Guide
PESQ
ProEdge Square Guide
Accurately ensures a straight cutting edge on any woodworking chisel.
Robert Sorby Square Scraper
823H
Square Scraper (823H)
For finishing convex and flat bottomed forms.
The end profile can be modified to a specific shape as required.
Lifetime HSS Guarantee.
Robert Sorby Excelsior Bowl Gouge
842GL
Excelsior Bowl Gouge (842GL)
A must have in the tool kit of every bowl turner.
These bowl gouges are ideal for making bowls.
They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Titanium Nitride (for increased performance and resistance to edge wear. The cutting edge will outlast normal tools by a minimum of 3 fold)
Lifetime HSS Guarantee.
Stainless Steel Insert
SSI
This jumbo size stainless steel insert is ideal for making a flower vase for large, beautiful arrangements.For those who enjoy wine, it can be used to make a great looking wine cooler.Insert measures 4-1/2' outside diameter by 7-1/2' tall.Wood not included.Minimum blankSize: 4-3/4' diameter by 8'
Robert Sorby Steb Drive
STBCHUCK
Steb Drive (LSTBCHUCK)
The Steb Drive uses the same innovatively designed head as the original Stebcentre.
The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.
It has a positive and secure location utilising the flats of the spigot.
Robert Sorby Jig Adaptor Table
447JAT
Jig Adaptor Table
A slotted table to fit onto the Robert Sorby Universal Sharpening System to take a range of sharpening jigs.
The four nut and bolts hold the table in place and additional jigs can be added to assist in sharpening various woodturning and woodworking chisels and gouges.
Robert Sorby Cabinet Scraper
K1600XX
Cabinet Scraper (K1600)
A popular addition to any discerning cabinet maker's tool kit, these hand held scrapers smooth down rough edges quickly and easily.
Made from the best quality carbon steel the simple design of these tools belies their incredible effectiveness and designed to finish flat surfaces to the very highest standard.
Available in three sizes:
4 x 2"
5 x...
Pen Turning Course
PENTURN
Pen Turning Course
Learn a new skill or develop an existing one at Turners Retreat!
Hosted in Sheffield, this is a one-day hands on course with our pen turning tutor, Mick Hanbury. No prior knowledge is needed on this course but having done some woodturning is an advantage.
If you would like to try turning for the first time, we recommend participating in the Woodturning Course before the...
Hygrometer Face
HYGROMETER
German built quality Hygrometer with an elegant design.The dials are made of anodised Aluminium and has a bezel made of brass.
NOVA Pin Jaws
JSPIN
The NOVA Pin Accessory Jaw set has a long nose, designed to act as a pin chuck – expanding into a pre-bored hole, a very useful technique for free-form edged bowls. It is not necessary to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins. They are also ideal for longer dowel work. Twist drills can be gripped...
Robert Sorby TurnMaster Handled Chisel Includes 3 Carbide Cutters
RSTM-HCT123
TurnMaster Handled Chisel Includes 3 Carbide Cutters (RSTM-HCT123)
Providing choice and flexibility in one easy to handle tool.
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system.
This chisel includes Round, Detail Point and Square Tungsten Carbide Cutter.
Now woodturners can choose between tungsten carbide, titanium...
NOVA Long Nose Jaws
6017
The NOVA 75mm (3″) Long Nosed Chuck Accessory Jaw Set features a 2″ rise above their base which means a very long reach, deep inside bowls. This is a very versatile jaw with tremendous holding power externally and internally. An ideal set for green wood turning. The internal features dovetail grip for holding footed bowls and other footed work pieces.
Made from K1045 steel for maximum...
Robert Sorby TurnMaster Tip Sharpener
RSTM-TH
TurnMaster Tip Sharpener (RSTM-TH)
The TurnMaster Tip Holder allows the user to sharpen small cutters.
Helps avoid fingertips getting caught whilst sharpening.
The bolt secures the cutters to end of the tool.
Strong and durable design.
Respirator Masks FFP2 - Pack of 2
CUP2V
Respair FFP2 Disposable Dust Mask. Pack of 2.
Offers an assigned protection factor (APF) of 10 x Occupational Exposure Standard (OES) for fine non-toxic dusts, fibres, fumes and mists.
Meets the FFP2 requirements of EN149:2001:2009
NOVA 25mm Jaws
JS25N
The 25mm jaw-set substitutes for the standard 50mm jaws for use on small work with 3/8″-1-1/4″ spigots, as a type of pin chuck with 1″ capacity, for expanding dovetail work on bowls up to 6″ diameter, and for 1/2″-1″ square blanks.
This set is for small bowls and unsupported small spigot turning and is ideal for small bench-top lathe work. Features a special NOVA...
SAFELOCK Woodworm Screw
10006
SAFELOCK Woodworm Screw
Standard with most NOVA Chucks.
Quick and easy method to mount unformed small bowl blanks.
Secure mounting to form the outside of bowls.
Strong thin form screw to cut into wood.
Warranty Information
Jo Sonjas Gesso Black
JS3713
This primer for wood, canvas and metal provides a smooth fine-grit finish with maximum ‘tooth’.
Droplet Ornament Kit
DOK
The Droplet ornament kit is plated with bright chrome to produce a holiday glow on your Christmas Tree. This kit uses a single tube with press in components that make it easy to turn. Have some fun and turn a custom ornament for family and friends that they’ll cherish for years to come.
Traditional droplet design
Single tube design
Solid brass components
Press in components
Make...
Robert Sorby Spindle Roughing Gouge 3/4"
843H19
Spindle Roughing Gouge 3/4" (B843193)
Also known simply as a roughing gouge.
Recommended for the initial turning of uneven or square spindle stock to round.
The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece.
Not designed for use on bowl grain projects.
Lifetime HSS Guarantee.
Robert Sorby ProEdge Knife Holder
PEKH
ProEdge Knife Holder
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.
The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.
The...
Robert Sorby ProEdge Buffing Kit
PEBUFFKIT
ProEdge Buffing Kit
This kit uses the buffing mop and honing paste to create a high polish on any steel.
Accessory for the ProEdge Sharpening System.
Items also available individually.
NOVA 8" Mini Cole Jaws
6006
An accessory for NOVA chucks, to expand your range and capacity of your standard NOVA chuck for specific projects and applications. It's a versatile set, designed for the re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls. Universally fits to any NOVA chuck* for maximum flexibility. Duplicate accessories are not needed for different NOVA chucks. Other...
Oak Burr Veneer 300 x 210
M112-A4
Oak Burr Veneer
Colour: Brown - Mid
Grain: Strong
Size: 300mm x 210mm
Thickness 0.5mm
Edwardian 3 Tier Cake Stand Fittings
CSED
Three tier cake stand fittings in gold.
Personalise your cake stand by creating your own plates made from wood or resin.
Supplied in three parts (top, middle and bottom) along with screws and washers
Easy to assemble kit, choose to use 2 tiers or all 3 tiers according to your need
Suitable for afternoon tea, weddings, parties and other activities
Please note, the image is an example...
Robert Sorby Beading & Parting Tool 3/8" 10mm
B833103
Beading & Parting Tool (833)
Size: 10mm (3/8")
A versatile tool used for parting off as well as producing beads. Its size makes it very stable, but also very sensitive in use.
Ideal for creating the spigots to fit in a chuck.
Can be used with a sizing tool (ref 970).
Lifetime HSS Guarantee.
G3 Chuck Key
48203
Replacement handle for the NOVA G3 Chuck. Solid steel with cast pinion.
Warranty Information