Robert Sorby Unhandled Excelsior Spindle Gouge
840G
Unhandled Excelsior High Performance Spindle Gouge (840G)
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed.
Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle stick and other spindle products.
Titanium Nitride (for increased performance and resistance to edge wear. The cutting edge...
Coaster Holder with Six Coasters
J60019
A wooden coaster holder with six coasters included.
Coasters are made from Beech.
Decorate the box with your own design using paints, pens or pyrography.
Unfinished (no varnish), suitable for pyrography. We recommend sanding before burning for best results
We recommend treating the wood with a heat resistant finish after burning
Robert Sorby External Shear Scraper
827
External Shear Scraper (827)
Shear scraping is a recently enhanced method of woodturning which relies on the presentation of the scraper at a shear angle.
This technique offers some significant advantages over conventional scrapers:
At the optimum angle of 45 degrees, the sliving action is safer and produces a superior finish.
Sanding is often unnecessary.
The risk of the cutter digging-in...
Universal Drill Press Laser
WL133
This Universal Drill Press Laser projects a thin set of cross-hairs onto your drill press table precisely where the drill bit will contact the work piece. It allows the user to quickly position and clamp the work piece in place, so that the hole is drilled exactly where needed. This eliminates the need to repeatedly lower the bit to the surface and align the tip of the bit to the desired hole location.
The...
Bushing Set for Vertex Pen
BUSH53
Bushing Set for Vertex Pen.
Simply use this bushing set on the mandrel to turn your blanks to the correct diameter.
Application Pads (Pack of 5)
WAP5
5 x Non Woven, Non Abrasive hand pads ideal for the application of Odie’s Oil and other wood treatment products. Its non abrasive properties are ideal for massaging Odie’s Oil, Butter and Wax into wood, resin, metal, concrete, leather and many other surfaces without marking the surface of your project.
Either cut in half or even into quarters and use by hand, once the non woven pad is...
Robert Sorby Easybeader
814H
Easybeader (814H)
The Easybeader is designed to quickly and efficiently cut a series of evenly spaced beads.
Conceived by a production turner who needed to produce bee-hive designs, the Easybeader is simple to use and easy to sharpen.
Comes complete with a full set of instructions.
Ideal to create honey dippers.
Lifetime HSS Guarantee.
Robert Sorby 9" External Bowl Rest
L767E
9" External Bowl Rest
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense.
Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem.
Stems are available in 1/2", 5/8", 3/4", 7/8",...
Salmon Veneer 450 x 150
M52-087
Colour: Salmon
Grain: Light
Species: Bolivar
Size: 450mm x 150mm
Thickness 0.5mm
Robert Sorby Swan Neck Hollowing Tool 20"
B855003
Swan Neck Hollowing Tool (855H)
The Swan Neck Hollowing Tool is a very versatile, general purpose hollower.
Ideal for under-cutting.
Fitted with a replaceable High Speed Steel tool tip (851C).
Min aperture: 1/2"
Max depth: 6"
Cole Jaw Buffer Accessory Kit
6030
Accessory for the NOVA JSCOLE Cole Jaw Set and the NOVA 6006 Mini Cole Chuck Jaw Set. This kit contains 8 multi-sided buffers and 8 long pin buffers to enable you to hold a variety of projects in your NOVA Cole Jaws and Mini Cole Jaws.
8 multi-sided buffers, 8 long pin buffers (4 sided buffers and a long pin buffers).
Exclusive for the NOVA Cole and Mini Cole Jaws.
These 2 sets cover a majority...
Robert Sorby Spindle Roughing Gouge
843
Spindle Roughing Gouge (843)
Also known simply as a roughing gouge.
Recommended for the initial turning of uneven or square spindle stock to round.
The shape of the spindle roughing gouge enables the tool to cut safely with the wings (the tips of the side walls) well back from the work piece.
Not designed for use on bowl grain projects.
Lifetime HSS Guarantee.
NOVA Spigot Jaws
TR6026
31mm Mini Jaws
Mini Spigot Accessory Jaw Set is an accessory for NOVA chucks, designed to expand your range and capacity of your standard NOVA chuck for specific projects and applications.
Longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins.
These special 25mm extended jaws are designed to act as a pin chuck, expanding into a pre-bored hole. This is an...
Robert Sorby Curved Scraper
B828192
Curved Scraper (828)
The curved end profile makes this excellent for creating, smoothing and blending curved surfaces in bowl work, e.g. round bottomed boxes.
This tool is able to take an aggressive cut, whilst retaining butterfly sensitivity for refining cuts.
Lifetime HSS Guarantee.
Robert Sorby ProEdge Fingernail Profile Arm Only
PEFPARM
ProEdge Fingernail Profile Arm Only
The fingernail profiling arm can be used with the WPEFPBOSS to shape those perfect fingernail sweeps on bowl and spindle gouges.
This item is also available as a set WPEFPKIT, containing the arm and the boss.
Robert Sorby Bowl Gouge with Extra Long Handle
B842194
Bowl Gouge with Extra Long Handle (842XLH)
A must have in the tool kit of every bowl turner.
These bowl gouges are ideal for making bowls.
They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Lifetime HSS Guarantee.
Colouring on Woodturning Course
COLOURING
Learn how to add a personal, decorative touch to your work at our Colouring on Woodturning course!
Held in Sheffield, this is an instructional hands-on course with our woodturning tutor, Mick Hanbury. No prior knowledge is needed on this course - it is suitable for beginners and intermediates wishing to add colour to wood turned pieces of work.
During the course, you will learn how to achieve...
Double-Sided Hand Sanding Block
ABSBE
Double-sided hand sanding block for 70 x 125mm abrasive sheets.
Make sanding easier with this lightweight hand sanding block. Soft density foam on one side and medium density black foam on the other. Grip on both sides for fast and easy abrasive sheet changing.
Sanding block with hook and loop pad
Lightweight and comfortable to hold
Very efficient hand sanding
Double-sided for fast...
Robert Sorby Micro Texturing Cutter
B370
Micro Texturing Cutter (B370)
The Robert Sorby Fine Micro Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of small spiral patterns and textures on a range of projects including bowls, vases and boxes.
One of three cutters for the Modular Micro Spiralling Tool.
Experiment using the various pitch depths these cutters provide.
With a bit of practice...
Robert Sorby Unhandled Continental Spindle Gouge
839
Continental Spindle Gouge Unhandled (839)
Originating from Europe, these tools have gained a reputation for their superb handling qualities on spindle work.
The unhandled tool allows the turner to add their own handle.
Being a forged construction, they have an even wall thickness, thereby increasing finesse without compromising strength.
Lifetime HSS Guarantee.
Jo Sonja Premium Pearlescent Paint
JJ36
Jo Sonja Premium Pearlescent Acrylics are specially formulated using a combination of the finest iridescent, pearlescent and fine art pigments available for stunning effects. The collection includes some beautiful colours, including both opaque and transparent colours all available in 2oz bottles.
Fine artist quality, heavy bodied pigments that will not tarnish over time. Compatible with all Jo...
Robert Sorby Unhandled Excelsior Bowl Gouge
842G
Excelsior High Performance Bowl Gouge Unhandled (842G)
A must have in the tool kit of every bowl turner. The unhandled tool allows the turner to add their own handle.
These bowl gouges are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.
Titanium Nitride (for increased performance and resistance to edge wear. The cutting edge will...
Robert Sorby Sovereign Handle
SOV
Sovereign Handle (SOV)
Sovereign handles, available in three sizes:
SOV-12
12" - The newest of the Sovereign handles. At 12" this handle size delivers control at close range making it ideal for smaller projects.
SOV-16
16" - This handle is equally at home providing added comfort when stretching to the bottom of long vases or adding that stability often required...
NOVA Dovetail Chisel
6008
Accessory for NOVA Chucks to quickly and accurately make the dovetail recess for the chucking of a bowl. Ensures a dovetail with a sharp, clean edge to precisely match to the dovetail contour of NOVA Accessory Jaws. Creates maximum holding power to your NOVA Chuck. Scaled with a handy mark out scale for use as a guide.
Robert Sorby Negative Rake Scraper 3/4"
821
Negative Rake Scraper (821)
Formerly known as the Hardwood Scraper it was originally designed to tackle hardwoods when producing musical instruments.
However, the tool is equally at home on all types of wood and is as effective on spindle work as it is on bowls – the action of the negative rake on the bevel reducing the risk of grain tear-out and leaving a polished surface that requires...
Robert Sorby Captive Ring Cutter
805C
Captive Ring Cutter (805C)
The cutters are available in sizes: 3/16", 1/4", 3/8" and 1/2".
The Robert Sorby Captive Ring Tool has a user friendly flat shaft with a specially designed cutter seat.
The seat is machined into both sides of the shaft so that when cutting either side of the captive ring, the cutter is angled to the front and into the direction of the cut, giving...
African Rosewood
AFRW
African Rosewood blanks, available in square or spindle.
The colour varies from reddish brown to pink with lighter streaks, some yellow to pale straw colour.
Robert Sorby Midi Hollowmaster
RS130KT
Midi Hollowmaster (RS130KT)
Designed for generating square sections such as shoulders or tenons where a turned part is to be assembled into a hole - a chair leg is good example.
This cutter is also useful on the outside of a round form, as well as long straight sections on spindle work.
Excellent results can be achieved in shear scraping mode with cutter especially effective shear scraping...
Acrylic Size 60ml
TT-60AS
The Tiny Turner Acrylic Size 60ml
A 60ml bottle of water-based acrylic size perfect for use with the Tiny Turner Chameleon ranges of pigments and flakes. Also suitable for use with metal leaf and gold leaf.
Classed as a 15 minute size, this glue takes approximately 15 minutes to reach tack point after which it remains open (sticky) for around 24 hours.
Apply the pigments/flakes/leaf after...
Cole Jaw Fastening Kit
NOVA-CJFK
Cole Jaw Fastening Spares.
Contains 2 different designs in each kit - 8 round buffers. 8 x black screws and 8 x gold screws.
Robert Sorby Round End Swivel Tip
RS211C
Round End Swivel Tip (RS211C)
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting.
A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below).
This cutter is also available in Robert Sorby's Excelsior (titanium nitride coated high speed steel) series.
Sharpening:
Use...
Odie's Oil Sample Kit
ODIESSAMP
Odie's Oil Sample Kit
This 30ml sample of Odie’s Oil will provide up to 15-20 square feet of coverage on most hardwoods and gives the ideal quantity for proper testing and evaluation on a variety of surfaces.
The sample comes with product information and application instructions and an application pad which can be stored in the zip lock bag in between projects.
All that is required...
Oak Photo Frame
J50305
A solid oak photo frame, suitable for a 7" x 5" photograph.
Burn your own design with a pyrography machine and pen to create a unique gift for your home or for a loved one. Also suitable for painting, or leave it as it is for a natural look!
Material: Oak
Unfinished (no varnish), suitable for pyrography. Always sand before burning for best results
Ideal to display your favourite...
Robert Sorby Captive Ring Tool
B805052
Captive Ring Tool (805H)
The unique Captive Ring Tool from Robert Sorby has a user friendly flat shaft with a specially designed cutter seat.
This seat is machined into both sides of the shaft so that when cutting either side of the captive ring, the cutter is angled to the front and into the direction of the cut, giving more control over the cut whilst keeping the tool flat on the rest.
The...
Coronet Herald Bench Feet
16012
To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand.
Robert Sorby Relief Cutting Tool
B895001
Relief Cutting Tool (895H)
The Robert Sorby Relief Cutting Tool is designed to help the turner avoid stripping out the bottom of boxes when thread cutting.
For best results use in combination with the Tool Support Rest.
General Care
We recommend applying a light oil to the blades when not in use to keep them in perfect condition.
Robert Sorby Excelsior Spindle Gouge
840GH
Excelsior Spindle Gouge (840GH)
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed.
Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects.
With an increased edge life by bonding Titanium Nitride to our existing HSS tools.
Sharpen in the same way as...
Robert Sorby Sovereign TurnMaster Set in Wooden Box
SOV-RSTMDBS
Sovereign TurnMaster Set in Wooden Box (SOV-RSTMDBS)
The Robert Sorby TurnMaster is the perfect tool for the beginner or a fantastic foil for the more experienced woodturner looking for a flexible tool to equip their workshop.
This set comes complete with 3 detachable heads to allow for quick interchanging.
Set includes:
TurnMaster shank with HSS detail point cutter fitted
HSS round...
Robert Sorby Chisel Edge Guard
F285EG25
Chisel Edge Guard (F285EG)
We highly recommend edge guards to protect yourself and your tools.
Available in 1", 1 1/2" and 2" sizes, these tough leather guards are a snug fit for both the 285 and 286 framing chisels.
CBN Wheel (Side & Rim Coated)
CBNSIDE
These outstanding wheels, which have an almost indefinite life if treated correctly, are used in place of a normal granular wheel on a 6" or 8" high speed grinder. Due to the bonding between the CBN grains and the supporting steel hub, the wheels can be used dry, without coolant. Very little pressure need be applied to sharpen the tool. Unlike normal grinding wheels, there are virtually no...
Robert Sorby Long Aluminium Micro Handle
B889
Long Aluminium Micro Handle (B889)
Manufactured from high grade aluminium these knurled grip, anodized handles for the Robert Sorby modular micro system are available in two sizes.
The larger 7 3/4" version adds more leverage and grip for those preferring to work a little further from the project workpiece.
The Modular Micro Handle 5 3/4" (B888) is also available as a separate item...
Robert Sorby Bowl Scraper 1"
B801205
Bowl Scraper 1" (B801205)
Slightly narrower than the heavy duty scrapers but produced from thicker 1/2" (13mm section).
Designed for inboard bowl finishing.
Lifetime HSS Guarantee.
Robert Sorby ProEdge Backplate only
PEBPLATE
ProEdge Backplate
Replacement part for the ProEdge Sharpening System.
Robert Sorby Heavy Duty Framing Chisel
285
Heavy Duty Framing Chisel (285)
Long (10.1/2"), thick blade designed for large framing work when working with deep mortices where extra strength is required.
Blade tapers along its length.
The Heavy Duty Registered Chisel is fitted with ash handle.
Made with high quality High Speed Steel.
Available in 3 sizes.
Overall length 19.5"
Ruby Wheel - 80 Grit
OD2080R
Ruby wheels are suitable for both carbon and high speed turning tools and hand tools.It's a fast cool cutting wheel on both 3000rpm and 1500rpm grinders.
Robert Sorby Micro Parting Tool 1/16"
865
Micro Parting Tool (865)
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well.
Lifetime HSS Guarantee.