Ball- End Cutter
Ball- End Cutter TRS233C
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter...
£10.25
Bead CutterBead Cutter
Bead Cutter BEADCUTTER
The Robert Sorby Bead Cutter is one of five additional cutters available for the popular Robert Sorby Multi-tip Hollowing Tool. This double sided cutter will cut beautiful beads on spindle work at 1/4" and 1/2" and is one of two beading cutters available for this tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter...
£15.25

Bullet Cutter
Bullet Cutter TRS232C
The Robert Sorby Bullet Cutter is designed for the rapid removal of waste material when using either of two popular tools the Swan Neck and Swivel Tip tools. Used in combination with the Ball End Cutter (RS233C) for developing hollow forms. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should...
£10.25
Chattertool Cutter - Square & Pointed
Chattertool Cutter - Square & Pointed TRS220
One of two double ended chattertool cutters that will produce a myriad of decorative patterns. Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre. To be produced on end grain only. Sharpening: Use a diamond file or honing stone flat across the top face....
£5.95

Cove CutterCove Cutter
Cove Cutter TRS23
The Robert Sorby Cove Cutter is one of five additional cutters available for the popular Robert Sorbyn Multi-tip Hollowing Tool. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Related Products: This cutter is designed for use with the following tools: Multi-tip...
£15.25
Cutter
Cutter 851C
The Robert Sorby General Purpose Cutter is a small cutter designed for the removal of waste material when using the smaller Swan Neck and Swivel Tip probe tools. Ideal for end grain use on shallower depth projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often....
£9.95

Cutter Set Includes Recess- Cove- Bead
Cutter Set Includes Recess- Cove- Bead TRS237C
This set features three cutters for Robert Sorby's popular Multi-tip Hollowing Tool. The RS236C is the larger of two double sided beading cutters and is designed to cut 3/8” and 5/8” beads. Designed for use with: Multi-tip Hollowing Tool (RS200KT and RS200). Similarly the RS235C is the larger of two cove cutters. This cutter is perfectly designed to cut coving on spindle work to 3/8” and 5/8”....
£36.35
External Shear ScraperExternal Shear Scraper
External Shear Scraper 827
Shear scraping is a recently enhanced method of woodturning which relies on the presentation of the scraper at a shear angle. This technique offers some significant advantages over conventional scrapers.At the optimum angle of 45 degrees, the sliving action is safer and produces a superior finish.Sanding is often unnecessary.The risk of the cutter digging-in is virtually eliminated.
from £10.25

Internal Shear ScraperInternal Shear Scraper
Internal Shear Scraper 826
Shear scraping is a recently enhanced method of woodturning which relies on the presentation of the scraper at a shear angle. This technique offers some significant advantages over conventional scrapers.At the optimum angle of 45 degrees, the sliving action is safer and produces a superior finish.Sanding is often unnecessary.The risk of the cutter digging-in is virtually eliminated.
from £10.25
Midi Round & End Cutter
Midi Round & End Cutter TRS111C
The Robert Sorby Midi Round Tip cutter provides an excellent choice for removing waste material quickly and efficiently, especially when undercutting on smaller projects. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products:...
£9.75

Midi Side & End Cutter
Midi Side & End Cutter TRS112C
The Robert Sorby Midi Point Tip cutter provides an excellent choice for creating parallel sides on small boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. Designed for the Midi Multi-tip Hollowing Tool this cutter is great for the smaller project. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best...
£9.95
Recess Cutter 45# & 60#
Recess Cutter 45# & 60# TRS234C
The Robert Sorby Recess and Dovetail cutter is an excellent addition to the Robert Sorby Multi-tip Hollowing Tool and is the perfect tool for job when creating recesses and dovetails at 40 and 60º . Ideal as the foot on a bowl for gripping in the chuck jaws. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple...
£15.25

Replacement Cutter
Replacement Cutter TSOV-ULTCUT
The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms. It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool. The titanium nitride version of the cutter adds wear resistance and so increases the cutter's longevity. Sharpening:...
£12.65
Round End Cutter
Round End Cutter TRS211GC
The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly especially undercutting and with added wear resistance of its TIN coating. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below). This cutter is also available in high speed steel. Sharpening: Use a diamond file or honing stone around...
£13.95

Side End Cutter
Side End Cutter TRS212GC
The Robert Sorby Side End Swivel Tip is designed to create parallel sides on boxes and vases. This flexible cutter will also create flat surfaces on the bottom of pieces as well as crisp corners. TIN coating provides additional wear resistance increasing the lifetime of the cutter. This cutter is also available in high speed steel Sharpening: Use a diamond file or honing stone around the profile of...
£13.95
Small Tear Drop Cutter
Small Tear Drop Cutter TRS222G
The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports...
£12.25

Tear Drop Cutter - Gold
Tear Drop Cutter - Gold TRS200GC
The Robert Sorby Excelsior medium tear drop cutter provides a multi-facetted, highly efficient cutting edge in a durable coating. As with all teardrop cutters, the shape effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved...
£17.95
Titanium Nitride Cutters - Pack of 3
Titanium Nitride Cutters - Pack of 3 RSTM-GT123
TurnMaster Round, Detail Point and Square Titanium Nitride Cutters
£31.95

Tungsten Carbide Cutter - Detail Point
Tungsten Carbide Cutter - Detail Point RSTM-CT2
Tungsten Carbide square cutter.Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.Sharpens to 0.7 microns.Hardness is 90RC.Material is micro grade tungsten carbide.Better used for initial external waste...
£12.95
Tungsten Carbide Cutter - Square
Tungsten Carbide Cutter - Square RSTM-CT3
Tungsten Carbide detail point cutter.Tungsten Carbide makes light work of tough materials and is an extremely hard wearing and long lasting material.Although designed as a throwaway item it can be sharpened on specialist equipment such as the Robert Sorby ProEdge system with a Diamond Belt.Sharpens to 0.7 microns.Hardness is 90RC.Material is micro grade tungsten carbide.Better used for line detailing.Doesn't...
£12.95

Turnmaster - H.S.S. Cutter - Box Dovetail
Turnmaster - H.S.S. Cutter - Box Dovetail RSTM-TIP5
High speed steel box / dovetail cutter.This super fine grain structure will provide a razor sharp edge.The result is a superior finish to your turning projects and less need for sanding.Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.Sharpens to 0.2 - 0.4 microns.Hardness 62RC.Material M2 HSS.Better used for parallel side walls.Perfect for...
£9.50
Turnmaster - H.S.S. Cutter - Detail Point
Turnmaster - H.S.S. Cutter - Detail Point RSTM-TIP2
High speed steel detail point cutter.This super fine grain structure will provide a razor sharp edge.The result is a superior finish to your turning projects and less need for sanding.Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.Sharpens to 0.2 - 0.4 microns.Hardness 62RC.Material M2 HSS.Better used for line detailing and finishing.
£9.50

Turnmaster - H.S.S. Cutter - French Curve Inside
Turnmaster - H.S.S. Cutter - French Curve Inside RSTM-TIP4
High speed steel french curve inside cutter.This super fine grain structure will provide a razor sharp edge.The result is a superior finish to your turning projects and less need for sanding.Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.Sharpens to 0.2 - 0.4 microns.Hardness 62RC.Material M2 HSS.Better used for internal shaping and finishing.
£9.50
Turnmaster - H.S.S. Cutter - Mushroom
Turnmaster - H.S.S. Cutter - Mushroom RSTM-TIP7
High speed steel mushroom cutter.This super fine grain structure will provide a razor sharp edge.The result is a superior finish to your turning projects and less need for sanding.Can easily be sharpened on traditional sharpening machines such as the Robert Sorby ProEdge or bench grinders.Sharpens to 0.2 - 0.4 microns.Hardness 62RC.Material M2 HSS.Better used for undercutting small hollow forms.
£9.50
Page: 1 | 2 |