Woodworking and Woodturning Machinery: Page 2

Vacuum Head V80

Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.

Was £67.74 Now from £50.81

Tool Rest Cross Bar 766

These crossbars are case hardened to avoid those irritating little nicks, so that your tool moves along smoothly.Available in 4', 6' and 9' lengths.

from £24.48

V812 Vacuum Generator V812

Vacuum generator for the stabilising system and vacuum chucks.

£167.94

Patriot Chuck Jaws 3.1/2" RSJ4

These jaws allow for even bigger bowls up to 16' diameter to be held securely.

£90.18

Hollow Revolving Centre Set REVKITCEN

Revolving Centre Sets comprise a high quality hollow revolving centre and seven popular accessories in a sturdy fitted storage box. These sets feature a stub morse taper fitting. Comes complete with ejector tool.

£111.12

Compatriot Chuck LRSPCOMN34

The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM (requires insert version) RSPCOMN34 (M33 x 3.5) RSPCOMMH (1.1/2" x 6tpi) Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.

from £198.60

Set of Screws & Rubbers RSJBRSSK

Robert Sorby Bowl Reversing Jaws Spare Screw Kit

£11.82

Patriot Chuck Zero Jaws RSJZ

Zero Jaws will close down to 4mm minimum making them ideal for turning fine or delicate projects.They are a must for those specialising in miniature work.The dome shape is incorporated in the design to enable work very close to the project.It also allows internal holding of larger projects without the fear of marking the wood.

£93.30

Poseable Hose Extension CVA25080105

300mm extension for poseable hose.

£27.49

Patriot Chuck 1" Pin Jaws RSJP

These Pin Jaws have a multitude of uses.Ideal for small projects utilising the fine internal and external dovetail.The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.

£78.36

Patriot Chuck Long Nose Jaws RSJLN

Rough turned bowls can be remounted internally with the reach of almost 4' of these jaws.Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2' away from the chuck body.

£116.82

4" Floor Sweep CVA40050102

For use with 4" extraction hose.

£13.19

4" Wire Hose Clamp CVA40050120

For effectively securing the end of 4" diameter hose.

£2.74

Faceplate Ring FACERING

Designed with an internal dovetail to fit securely on to the standard 2" (50m) jaws. These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting. Available with an outer diameter of 3 1/8" (80mm) and 4 3/4" (120mm).

from £26.22

8" - 200mm Bench Grinder RSBG8

This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. Smooth and quiet in use. With a larger than standard 40mm wide white aluminium oxide wheel, ideal for tool sharpening, alongside a standard carborundum wheel for general purpose grinding. Specifications Stone Diameters: 200mm (8") Coarse Stone...

£109.99

Patriot Chuck Jaws 1.3/8" RSJ15

Designed for smaller projects such as boxes and bowls up to 6' diameter.

£64.50

Box Turners Table L768

This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4', 6' and 9' as well as a 9' curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...

£15.24

2.5" Posable Hose Assembly Kit CVA25080104

Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems.

£49.27

Patriot Chuck Deep Grip Jaws 4.1/4" RSJDG

Designed with deep sides to give extra grip on large logs and awkward pieces of wood.They also have a large internal and external dovetail to securely hold large bowls in excess of 16' diameter.

£93.96

9" External Bowl Rest L767E

This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm...

£35.76

Steb Drive STBCHUCK

The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.

from £64.32

Patriot Wobble Chuck RSWC

An inexpensive introduction to off-centre or eccentric turning, the Wobble Chuck fits in the standard 2" jaws of the Patriot chuck in the same manner as a faceplate ring. The workpiece can be held by three screws - like a faceplate - or by a single wood screw - like a screw chuck - or by both means. It is then off-set by rotating the upper section of the Wobble Chuck. Ideal for goblets...

£102.54

Patriot Chuck Pen Jaws PBDJ

These Jaws will hold your pen blank central so you can drill on the lathe.A groove in both jaws ensure you have a tight secure grip of the pen blank.Mount your drill chuck into your tailstock and simply wind in the drill.With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.These jaws have been designed to fit a Robert...

£49.92

Patriot Chuck Jaws 2.3/4" RSJ3

For bigger bowls and projects up to 13' diameter that need a little more substantial hold.

£86.52

Bandsaw Blade - BS350S - Pack of 3 BB10312

Pack of 3 Blades for BS350 (1/4', 3/8' and 3/4'). 3 pack

£54.99

Longworth Style Chuck LSC

Re-chucking bowls and platters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditional 4 jaw-self-centering chuck using standard 50mm dovetail jaws. It eliminates the time and hassle...

from £109.98

Flexible Connector 20mm - 60mm CVA10050102

This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port.If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it.The adaptor can also be used to connect directly to a 2.5' diameter extraction system and...

£7.69

9" Internal Bowl Rest L767

This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm...

£35.76

Bowl Reversing Jaws RSJBR

These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl. Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.

£103.02

Patriot Chuck Jaws 4.1/4" RSJ5

Large bowls and platters over 16' diameter can be turned due to the much bigger spigot or recess this set of jaws allows.

£94.08

ProEdge Aluminium Oxide Belt PEAOB

Aluminium Oxide ProEdge Belt - these are ideal for sharpening bench chisels, carving tools and plane irons.

£4.74

Clear Connector CVA25021103

To connect 2.5" diameter ducting together.

£3.29

4" Threaded Splice CVA40050119

4" Thread Splice

£6.59

Extension Tube For Tool Kit CVA25011100

Two lengths of black ducting for use with 2.5' extraction systems.

£10.99

Clear Waste Bag For CamVac CVG170-102

Clear waste bag to fit the CamVac GV286W Compact Wall Mounted Extractor series of machines.

£1.39

Vacuum Head O-Rings V840

Replacement O-Rings for the vacuum head.

Was £6.30 Now £4.73

Vacuum Hose V846

Spare vacuum hose

£5.00

Inner Filter for Ac400 SAC400-26

Inner Filter (Ac400)

£17.59

Two Stage Air Filter AC400

This new air filter offers great features and performance at a very competitive price. It features two stage filtration with pocket filters (previously only available on our top of the range AC2 machine and nearly twice the price) to provide filtration down to 1 micron. It has 3 speeds and a timer function so you can leave the unit to run for a period after you have finished in the workshop. Both...

£169.99