Honing Compound - Ultra Fine
Sale
Honing Compound - Ultra Fine TW475
150g ultra-fine honing compound from Robert Sorby
Was £7.00 Now £6.95
Horizontal Base For Universal Support
Horizontal Base For Universal Support XB-100
You'll have better control when sharpening turning tools and carving tools if the stone is turning away from the cutting edge.By adding the Tormek Horizontal Base to your older TORMEK you can move the Universal Support from vertical mount (wheel turning into edge) to horizontal mount (wheel turning away from edge).The Owner's Handbook gives you recommended mounts for various tools and jigs.Includes...
£17.95

Indexing System
Sale
Indexing System 763
The unique Robert Sorby Universal Indexing System (763) allows the turner to accurately divide and locate the workpiece in one of 24 positions. This is a datum point from which a whole host of patterns can be created. Precise locking of the workpiece allows for accurate boring or carving An innovative Indexing System, not dependent on a chuck Supplied with full instructions Available in sizes to fit...
Was £69.50 Now from £68.95
Insert
Sale
Insert INSERT
This chuck insert system allows the Patriot chuck to be fitted to almost every lathe.
Was £24.00 Now £23.50

Jet - 1221 Lathe
Jet - 1221 Lathe JWL-1221VS
The Jet JWL1221VS is different to every other lathe in the Jet range.The whole lathe has been designed to make the woodturning experience better by focusing on control.As with all other JET lathes, this one is made from cast iron, but the bed width is much wider than is usually found on machines of this size.This gives great support to the tool rest holder, which also stays exactly where you clamp...
£1,079.00
JS100N - NOVA 100mm Jaws
JS100N - NOVA 100mm Jaws JS100N
Designed for expanded dovetail and reverse dovetail for gripping footed bowls One of the most popular accessories for mounting 12-14? bowls Same jaw fixing system across all NOVA chuck models – total system interchangeability All NOVA chuck accessory jaws are designed to hold in the expansion and contraction modes 6-Year Warranty EXPANDING GRIP 96.8mm (3.81”) – 118mm (4.64”) CONTRACTING...
£44.99

JSPIN - NOVA Pin Jaws
JSPIN - NOVA Pin Jaws JSPIN
• Longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins • Acts like a pin chuck, expanding into a pre-bored hole. Perfect for free form edge bowls • These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge. • A big advantage over pin chucks...
£39.99
Jwl 1221Vs - Stand
Jwl 1221Vs - Stand JWL-1221STAND
This substantial stand turns your bench mounted JWL-1221VS lathe into standalone machine. With its wide feet, it is very stable and includes adjustable levellers to take up any small unevenness in the floor. It has a handy tool storage tray with plenty of space for chisels and other essential items. He stand is easy to assemble and provides a rock solid base for your lathe.
£337.87

Knife HolderKnife Holder
Sale
Knife Holder PEKH
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.The jig can be fitted to the ProEdge...
Was £23.00 Now £22.50
Knife Sharpening JigKnife Sharpening Jig
Sale
Knife Sharpening Jig PEKJIG
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.The jig can be fitted to the ProEdge...
Was £57.50 Now £57.25

Large Vacuum Bag
Large Vacuum Bag V825-30
Large vacuum bag
£33.95
Longworth Style Chuck - 16"
Longworth Style Chuck - 16" LSC16
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditiona 4 jaw-self-centering chuck using standard 50mm dovetail jaws. It eliminates the time and hasse of...
£159.95

Longworth Style Chuck 10"
Longworth Style Chuck 10" LSC10
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve.The Longworth style chuck makes it easy.This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds.Designed for clamping in a traditional 4 jaw-self-centering chuck using standard 50mm dovetail jaws.It eliminates the time and hassle of removing...
£99.95
Mini Screw Chuck
Mini Screw Chuck 649
An inexpensive mini screw chuck suitable for miniature projects that fits into the jaws of the Patriot woodturning chuck
£19.00

MopMop
Sale
Mop MOP
Produced from a fine grade of cotton these deluxe mops have been made to deliver the ultimate finish.They are used after sanding to buff oil, lacquer and wax finishes to a lustrous sheen.Mops are fixed to the Sandmaster using the pigtail mandrel.
Was £18.50 Now from £17.50
no image available
Mounting Kit For AFS-500 & AFS-1000 400398
Mounting kit for Jet AFS-500 and AFS-1000 filters
£34.96

Mounting Stud - 1" Diameter
Mounting Stud - 1" Diameter HRAP-1000-45
The hollow roller is a torque arrestor tool rest which attaches to the lathe through the users existing banjo, an auxiliary height adjustable tool rest and the unique profile Hollow Roller boring bar (3/ quarter round diameter) with high speed steel scraper bit. The only other parts needed are the Hollow Roller stud adaptor to fit your size lathe banjo and a desire to create unique artful vessels and...
£18.95
Mounting Stud - 25mm Diameter
Mounting Stud - 25mm Diameter HRAP-1225-45
The hollow roller is a torque arrestor tool rest which attaches to the lathe through the users existing banjo, an auxiliary height adjustable tool rest and the unique profile Hollow Roller boring bar (3/4 quarter round diameter) with high speed steel scraper bit. The only other parts needed are the Hollow Roller stud adaptor to fit your size lathe banjo and a desire to create unique artful vessels...
£18.95

Mt1 To Mt2 Sleeve
Mt1 To Mt2 Sleeve MT1-MT2
Morse taper sleeve 1MT - 2MT
£9.99
Multi-Rest - Wheel Assembly
Multi-Rest - Wheel Assembly SRWA01
Add on wheel assembly to change the number of wheels on your MultiRest™. The stock unit comes with 3 wheel assemblies. This assembly allows you to add as many wheels as needed for your project. This assembly comes complete with everything you need to attach and adjust the wheel on your existing MultiRest™ ring. Installation is quick and easy. Each wheel assembly includes two industrial quality...
£38.95

Multi-Rest - Work Support System
Multi-Rest - Work Support System SR1000
The patent pending, made in the USA, Multirest is compatible with lathe swing sizes from mini up to 20" with no additional hardware required.The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to 4.5" width.Each roller wheel assembly can be positioned anywhere around the ring to adjust the centre position for a wide range...
£308.95
NOVA 35mm Bowl Jaws
NOVA 35mm Bowl Jaws 6019
Fits perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm Accessory Jaws. • Made from K1045 steel for maximum structural strength. • The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws. EXPANDING GRIP 37.9mm (1.49”) – 59mm (2.32”) CONTRACTING GRIP Square: 29mm (1.14”) – 7.9mm (.31”) Spigot: 31mm (1.22“) –...
£29.99

NOVA Chuck Insert 1.1/8 x 12
NOVA Chuck Insert 1.1/8 x 12 IUNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
NOVA Chuck Insert 5/8 plain bore - unthreaded
NOVA Chuck Insert 5/8 plain bore - unthreaded ISNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
Page: First | | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | | Last