2 1/2" - Wire Hose Clamp
2 1/2" - Wire Hose Clamp CVA25050107
For effectively securing the end of 2.5" diameter hose.
£0.99
2 1/2" - Y Fitting - Clear
2 1/2" - Y Fitting - Clear CVA25050104
Y connector for use in 2.5" diameter workshop dust extraction systems.
£5.99

2 3/4" - 70mm - Patriot Jaws
2 3/4" - 70mm - Patriot Jaws RSJ3
For bigger bowls and projects up to 13" diameter that need a little more substantial hold.
£63.80
2 Quart Tank
2 Quart Tank V822
Resin stabilised wood gives new life to woods that would normally not be usable for turning.Woods that tend to crack and check, such as spalted woods, can now become solid.Runs with a standard air compressor (minimum 2.5cfm @ 55-65psi) using the same V811 Vacuum Generator as the Vacuum Chuck.The stabilising system provides the optimum in versatility and economy in wood stabilisation.This is the 2 quart...
£82.50

2.5" - Posable Hose Adapter
2.5" - Posable Hose Adapter CVA250-80-103
This adaptor connects the modular hose directly to a 2.5" diameter dust extractor inlet.  This is an official LOC-LINE® product, the original and best modular hose system. Suitable for 2.5" systems.
£5.99
2.5" - Posable Hose Nozzle - Rectangular
2.5" - Posable Hose Nozzle - Rectangular CVA250-80-102
Self supporting extraction nozzle, ideal for woodturning. This is an official LOC-LINE® product, the original and best modular hose system. Suitable for 2.5" systems.
£7.99

2.5" - Posable Hose Nozzle - Round
2.5" - Posable Hose Nozzle - Round CVA250-80-101
Self supporting extraction nozzle, ideal for woodturning. This is an official LOC-LINE® product, the original and best modular hose system. Suitable for 2.5" systems.
£7.99
2.5M 4" Hose W/ 1 Cuff
2.5M 4" Hose W/ 1 Cuff ZAMV-C
2.5m Length of 4" PU Hose (Left Hand Helix)( Complete With 1 Easy Fit Cuff)
£34.99

3 1/2" - 90mm - Patriot Jaws
3 1/2" - 90mm - Patriot Jaws RSJ4
These jaws allow for even bigger bowls up to 16" diameter to be held securely.
£66.50
3" - 75mm - Vacuum Head 1 1/4 x 8tpi
3" - 75mm - Vacuum Head 1 1/4 x 8tpi V803-125
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50

3" - 75mm - Vacuum Head 1 x 8 tpi
3" - 75mm - Vacuum Head 1 x 8 tpi V803-1
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50
3" - 75mm - Vacuum Head 33 x 3.5
3" - 75mm - Vacuum Head 33 x 3.5 V803-33
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50

3" - 75mm - Vacuum Head O-Rings
3" - 75mm - Vacuum Head O-Rings V840-3
Replacement O-Rings for the vacuum head.
£5.25
3" - 75mm - Vacuum System 1 1/4" x 8tpi
3" - 75mm - Vacuum System 1 1/4" x 8tpi VS3H125
Vacuum chucking is a very popular method of mounting bowls on the lathe for light turning and finishing without marking the surface of the work.The Holdfast Vacuum Chuck System is a new generation of Vacuum Chuck that runs off of a standard shop air compressor (minimum 2.5 fm at 55-65psi) using the V810R Vacuum Generator.The Holdfast System offers simplicity, dependability, and performance at a fraction...
£255.00

3" - 75mm - Vacuum System 1" x 8tpi
3" - 75mm - Vacuum System 1" x 8tpi VS3H1
Vacuum chucking is a very popular method of mounting bowls on the lathe for light turning and finishing without marking the surface of the work.The Holdfast Vacuum Chuck System is a new generation of Vacuum Chuck that runs off of a standard shop air compressor (minimum 2.5 fm at 55-65psi) using the V810R Vacuum Generator.The Holdfast System offers simplicity, dependability, and performance at a fraction...
£255.00
3.5 Quart Tank
3.5 Quart Tank V823
Resin stabilised wood gives new life to woods that would normally not be usable for turning.Woods that tend to crack and check, such as spalted woods, can now become solid.Runs with a standard air compressor (minimum 2.5cfm @ 55-65psi) using the same V811 Vacuum Generator as the Vacuum Chuck.The stabilising system provides the optimum in versatility and economy in wood stabilisation.This is for the...
£92.50

33 x 3.5 - Spindle Extender
33 x 3.5 - Spindle Extender A863
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock. 33mm
£44.95
36Ltr - 4" Inlet Motor - Double - Wall Mounted
36Ltr - 4" Inlet Motor - Double - Wall Mounted CGV2863WALL
This compact wall mounted machine has a large 150 litre capacity and is ideal for serving extraction systems in smaller workshops. The waste is collected in reusable bag which is fitted to the exterior of a strong steel cage to retain its shape. In addition to wood dust and chippings, it can tackle workshop debris, nails, and many other types of waste with ease and features the CamVac triple filtration...
£349.00

36Ltr - 4" Inlet Motor - Single
36Ltr - 4" Inlet Motor - Single CGV286-3
This is a low cost, yet powerful vacuum for workshops and industrial maintenance.It will tackle not just dust but nails, shaving and wood chippings.Incorporates three-phase filtration system.36 litre capacity.240V, 1000W motor.Drum is 335mm x 300mm.Weight is 10kg approx.You have the option of inlet sizes and single or twin motor.(Note castors and hose shown in picture are optional extras).
£195.00
36Ltr - 4" Inlet Motor - Single - Wall Mounted
36Ltr - 4" Inlet Motor - Single - Wall Mounted CGV2861WALL
This compact wall mounted machine has a large 150 litre capacity and is ideal for serving extraction systems in smaller workshops. The waste is collected in reusable bag which is fitted to the exterior of a strong steel cage to retain its shape. In addition to wood dust and chippings, it can tackle workshop debris, nails, and many other types of waste with ease and features the CamVac triple filtration...
£259.00

36Ltr - 4" Inlet Motor - Twin
36Ltr - 4" Inlet Motor - Twin CGV286-4
This is a low cost, yet powerful vacuum for workshops and industrial maintenance.It will tackle not just dust but nails, shaving and wood chippings.Incorporates three-phase filtration system.36 litre capacity.240V, 1000W motor.Drum is 335mm x 300mm.Weight is 10kg approx.You have the option of inlet sizes and single or twin motor.(Note castors and hose shown in picture are optional extras).
£269.00
4 1/4" - 108mm - Patriot Jaws
4 1/4" - 108mm - Patriot Jaws RSJ5
Large bowls and platters over 16" diameter can be turned due to the much bigger spigot or recess this set of jaws allows.
£69.40

4" - Blast Gate - Unequal Ends
4" - Blast Gate - Unequal Ends CVA40050106
Used to close off the suction to a machine when not in use. For use with 4" diameter systems.
£7.99
4" - Dust Hood
4" - Dust Hood CVA40050122
For use with 4" extraction hose.
£9.99
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | | Last