Diamond Truing Tool
Diamond Truing Tool TT-50
With this unique tool, Tormek TT-50, you can true and dress your grindstone exactly round and flat.It mounts and locks instantly on the Tormek Universal Support.The tool is guided by the Universal Support, which also guides the jigs.This ensures that the stone surface is always parallel to the tool fitted in the jig.

Tormek - Knife Jig (Width 45mm)
Tormek - Knife Jig (Width 45mm) SVM-45
The jig for knife sharpening comprises an adjustable clamp for holding knives of any thickness and an adjustable stop.You adjust the jig to the knife thickness with the screw and lock by tightening the knob. The jig rests on the Universal Support.The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is normally placed vertically for...
Was £32.58 Now £27.86
Tormek - Long Knife Jig
Tormek - Long Knife Jig SVM-140
This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades.The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob.The jig rests on the Universal Support....

Tormek - Multi Jig
Tormek - Multi Jig SVS-50
This patented jig consists of a housing and two interchangeable seats one closed, and one open, The seats can swivel and be locked with the screw at any skew angle between 0-45ยบ . Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels. By turning the jig upside down you can grind both of the bevels symmetrically.
Tormek - Planer / Jointer
Tormek - Planer / Jointer SVH-320
The attachment comprises support, blade holder and allen key.In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth.This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding.It is important that the grinding angle is set with great accuracy.If you follow the detailed step by step...

Tormek - Scissor Jig
Tormek - Scissor Jig SVX-150
The jig for scissors sharpening comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be...
Was £41.95 Now £36.96
Tormek - Short Tool Jig. Improved
Tormek - Short Tool Jig. Improved SVS-38
From Tormek comes a jig for sharpening short carving tools and chisels down to 45mm long, including power carving tools (Bosch, Proxxon, AMT etc). Used in conjunction with the Universal Support, the jig is automatically held square to the grindstone.

Tormek - Tool Rest with Torlock
Tormek - Tool Rest with Torlock SVD-110
This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. Large scorps and inshaves.Also for cabinet scrapers and hollowing tools.It has a generous surface, 90-110mm (3'-4'), which permits a safe and steady positioning of the tool towards the stone.The bore is made with a special wedge shape, which increases the locking force by 250 %.You can lock the Tool...
Was £27.95 Now £24.72
Tormek - Universal Gouge Jig
Tormek - Universal Gouge Jig SVD-186
Use the SVD-186 for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186 can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The SVD-186 and Tormek wetstone machine combination offers three crucial benefits. The water cooled wheel results in a superior edge,...