1 3/8" - 35mm - Patriot Jaws
1 3/8" - 35mm - Patriot Jaws RSJ15
Designed for smaller projects such as boxes and bowls up to 6" diameter.
£47.60
2 3/4" - 70mm - Patriot Jaws
2 3/4" - 70mm - Patriot Jaws RSJ3
For bigger bowls and projects up to 13" diameter that need a little more substantial hold.
£63.80

3 1/2" - 90mm - Patriot Jaws
3 1/2" - 90mm - Patriot Jaws RSJ4
These jaws allow for even bigger bowls up to 16" diameter to be held securely.
£66.50
9" - Bowl Crossbar - Internal9" - Bowl Crossbar - Internal
9" - Bowl Crossbar - Internal 767
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Stems are available in 1/2", 5/8", 3/4", 7/8", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same...
£26.35

Box Scraper Platform
Box Scraper Platform 768
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£11.25
Compatriot Chuck
Compatriot Chuck RSPCCOM
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50

Compatriot Chuck 1 1/2" x 6
Compatriot Chuck 1 1/2" x 6 RSPCCOMH
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50
Compatriot Chuck N34
Compatriot Chuck N34 RSPCCOMN34
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50

Faceplate RingFaceplate Ring
Faceplate Ring FACERING
Designed with an internal dovetail to fit securely on to the standard 2" (50m) jaws.These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting.Available with an outer diameter of 3 1/8" (80mm) and 4 3/4" (120mm).
from £19.35
Honing Compound - Ultra Fine
Honing Compound - Ultra Fine TW475
150g ultra-fine honing compound from Robert Sorby
£7.85

Knife HolderKnife Holder
Knife Holder PEKH
Continuing with their innovative new products, Robert Sorby has introduced a Knife sharpening jig as an extremely useful accessory for the very popular ProEdge Ultimate Sharpening system.The Knife sharpening jig consists of a new back plate with a raised wear plate attached, a universal arm, a choice between a small or large knife holder and a set of instructions.The jig can be fitted to the ProEdge...
£25.25
Mop - Goblet - 2"Mop - Goblet - 2"
Mop - Goblet - 2" 9000006892
Produced from a fine grade of cotton these deluxe mops have been made to deliver the ultimate finish.They are used after sanding to buff oil, lacquer and wax finishes to a lustrous sheen.Mops are fixed to the Sandmaster using the pigtail mandrel.
from £20.75

Patriot - Bowl Reversing Jaws
Patriot - Bowl Reversing Jaws RSJBR
These Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl.Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.
£76.00
Patriot Custom Jaws
Patriot Custom Jaws RSJC
Made from high quality nylon, these jaws can be turned using normal woodturning tools to suit any project time and time again.
£28.80

Patriot Drive Centre
Patriot Drive Centre RSPDC
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
£18.35
Patriot Long Nose Jaws
Patriot Long Nose Jaws RSJLN
Rough turned bowls can be remounted internally with the reach of almost 4" of these jaws.Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2" away from the chuck body.
£82.35

Pen Blank Drilling Jaws
Pen Blank Drilling Jaws PBDJ
These Jaws will hold your pen blank central so you can drill on the lathe.A groove in both jaws ensure you have a tight secure grip of the pen blank.Mount your drill chuck into your tailstock and simply wind in the drill.With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.These jaws have been designed to fit a Robert...
£35.15
ProEdge - Aluminium Oxide BeltProEdge - Aluminium Oxide Belt
ProEdge - Aluminium Oxide Belt PEAOB
Aluminium Oxide ProEdge Belt - these are ideal for sharpening bench chisels, carving tools and plane irons.
£3.10

Proedge - Buffing Kit
Proedge - Buffing Kit PEBUFFKIT
This kit uses the buffing mop and honing paste to create a high polish on any steel. Items also available individually.
£34.80
Proedge - Cabinet
Proedge - Cabinet PECAB
This lightweight cabinet accompanies the ProEdge sharpening system.Ideal for workshops and sheds this space-saving storage unit means you can keep all your equipment in one easily accessible place.Cabinet Size: 35" height x 18" depth x 19" width.ProEdge machine not included.
£179.00

ProEdge - Ceramic BeltProEdge - Ceramic Belt
ProEdge - Ceramic Belt PECB
Ceramic ProEdge Belt - Ceramic is especially hardwearing and long lasting for heavy material removal.
from £5.30
Proedge - Honing Wheel
Proedge - Honing Wheel PEBOND
Honing wheel to fit the ProEdge machine.
£29.70

Proedge - Pigtail Mandrel
Proedge - Pigtail Mandrel PEPIG
Pigtail mandrel to fit the ProEdge machine.
£14.95
Proedge - Plus System
Proedge - Plus System PED01A
This deluxe model contains 3 additional jigs which make it ideal for the woodturner.Replacement belts are readily available.Includes: 1 x Aluminium Oxide 120 (PE120A) sharpening belt.1 x Zirconium 60 (PE60Z) sharpening belt.1 x Skew Jig (PESKEW) 1 x Standard Gouge Jig (PEVB) 1 x Fingernail Profiler (446/447UPG)
£349.95
Page: 1 | 2 | 3 |