« Continue Shopping

CBN Wheel - Side/Rim Coated

CBN15020S - CBN Wheel - Side/Rim Coated - 150 x 20
Item Code
Option
Price
Quantity
CBN15020S
150 x 20
£99.95
CBN15040S
150 x 40
£139.95
CBN20040S
200 x 40
£187.95
add to wish list

Product Description

These outstanding wheels, which have an almost indefinite life if treated correctly, are used in place of a normal granular wheel on a 6" or 8" high speed grinder. Due to the bonding between the CBN grains and the supporting steel hub, the wheels can be used dry, without coolant. Very little pressure need be applied to sharpen the tool. Unlike normal grinding wheels, there are virtually no sparks produced, the wheel and the tool remain very much cooler than is the case with conventional wheels, making it almost impossible to burn or blue the tools.
We have available, both 'Side and Rim Coated' wheels, which, in addition to the edge of the wheel, a distance of approximately 15 mm of one side face is also coated with CBN grains and “Rim Only Coated” which has no side coating.
When it comes to ‘grit’ size, diamond, CBN and other similar abrasives are not measured in the same way as standard oxide grits. We offer our wheels in a general-purpose grit size of B91. This leaves a ground surface similar to what could be obtained if using a conventional abrasive of 180grit.
You will need a reducing bush to suit the grinder of your choice. There is an 1/2", 5/8" and a dedicated size to suit a Tormek Sharpening machine.

This wheel is 200mm x 40mm with a Side and Rim coating.

Collect in Store

This item is available for collection.

Home Delivery

UK mainland delivery from FREE

check delivery cost

You Can Also...

Get help, write a review or share this product...

ask a questionwrite a reviewprint this pagebookmark and share

People who bought this also bought...

Face Shield
Face Shield
£8.95


Drill
Drill
from £3.25

Parting Tool
Parting Tool
from £35.05