Tormek Sharpening

Tormek Sharpening


Tormek - Long Knife Jig
Tormek - Long Knife Jig SVM-140
This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades.The jig comprises an adjustable clamp for holding knives of any thickness and an adjustable stop. You adjust the jig to the knife thickness with the screw. You lock the tool by tightening the knob.The jig rests on the Universal Support....
£41.15
Tormek - Planer / Jointer
Tormek - Planer / Jointer SVH-320
The attachment comprises support, blade holder and allen key.In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth.This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding.It is important that the grinding angle is set with great accuracy.If you follow the detailed step by step...
£131.92

Tormek - Sp-650 Stone Grader
Tormek - Sp-650 Stone Grader SP-650
The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening.This has obvious advantages.You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same setting of the jig.Besides being a very fast method, you achieve a perfect edge...
£19.12
Machine Cover Tormek
Machine Cover Tormek MH-380
Protective Cover keeps dust off your Tormek Grinder and prevents it singing at night.
£14.95

Profiled Leather Honing Wheel-Tormek
Profiled Leather Honing Wheel-Tormek LA-120
This wheel has exchangeable leather discs so you can easily replace a disc with a worn tip.Discs with alternative, narrower profiles are available as optional extra.The two standard discs have a radius of 3mm (1/8") and a 60 tip.The set of optional extra discs have a radius of 2mm (3/32") and a 45 tip.These smaller disc profiles permit the honing of small carving tools with very narrow profiles.The...
£39.96
Tormek - 250mm Grinding Wheel
Tormek - 250mm Grinding Wheel SG-250
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life.This stone efficiently cuts all types of tools and steel qualities including HSS.250mm diameter wheel, 220 grit.
£123.00

Tormek - Universal Gouge Jig
Tormek - Universal Gouge Jig SVD-186
Use the SVD-186 for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186 can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The SVD-186 and Tormek wetstone machine combination offers three crucial benefits. The water cooled wheel results in a superior edge,...
£66.22
T8 Tormek Sharpening Machine
T8 Tormek Sharpening Machine T8
The Tormek T-8 sharpening system is the perfect answer to your sharpening requirements. For any professional or amateur needing a versatile, reliable and repeatable sharpening system, the T-8 should be on the top of your list. The T-8 has a 250mm x 50mm water-cooled grindstone and a 220mm x 31mm leather tyred honing wheel. Powered by a quiet 200W motor, Tormek’s unique and efficient drive system...
£571.88

Tormek - Multi Jig
Tormek - Multi Jig SVS-50
This patented jig consists of a housing and two interchangeable seats one closed, and one open, The seats can swivel and be locked with the screw at any skew angle between 0-45º . Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels. By turning the jig upside down you can grind both of the bevels symmetrically.
£48.14
T4 Tormek Sharpening System
T4 Tormek Sharpening System T4
The Tormek T4 incorporates new, innovative, patent pending features. It is ideal for sharpening cabinetmaking hand tools, knives, scissors and woodcarving and turning tools. It comes supplied with two useful accessories, the first of which is the SP-650 Stone Grader. The second is the Anglemaster, an adjustable device used to set the correct angle for grinding plane and chisel blades. Also supplied...
£324.96

Tormek - Knife Jig (Width 45mm)
Tormek - Knife Jig (Width 45mm) SVM-45
The jig for knife sharpening comprises an adjustable clamp for holding knives of any thickness and an adjustable stop.You adjust the jig to the knife thickness with the screw and lock by tightening the knob. The jig rests on the Universal Support.The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal Support. The Universal Support is normally placed vertically for...
£27.86
Tormek - Scissor Jig
Tormek - Scissor Jig SVX-150
The jig for scissors sharpening comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be...
£36.96

Tormek - Short Tool Jig. Improved
Tormek - Short Tool Jig. Improved SVS-38
From Tormek comes a jig for sharpening short carving tools and chisels down to 45mm long, including power carving tools (Bosch, Proxxon, AMT etc). Used in conjunction with the Universal Support, the jig is automatically held square to the grindstone.
£19.96
Tormek - Tool Rest with Torlock
Tormek - Tool Rest with Torlock SVD-110
This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. Large scorps and inshaves.Also for cabinet scrapers and hollowing tools.It has a generous surface, 90-110mm (3"-4"), which permits a safe and steady positioning of the tool towards the stone.The bore is made with a special wedge shape, which increases the locking force by 250 %.You can lock the Tool...
£24.72

12mm - Bore Reducing Bush for Tormek
12mm - Bore Reducing Bush for Tormek CBNBUSHT
12mm bore aluminium grinding wheel bush to fit the Tormek Sharpening Machine
£10.95
 

Tormek Sharpening Categories