Ultima

Medium Ultima System (SOV22S-ULTM) The Sovereign Ultima Hollowing System enables the woodturner to create a myriad of hollow form shapes in both wet and dry woods thanks to its razor sharp cutting edge and articulating head and link system. It is equally effective on bowl grain work as well as end-grain project. The Ultima is available in two sizes. The systems come fitted to the Sovereign...

Medium Ultima Unhandled (SOV-RSULTM) A part of Robert Sorby Sovereign System, but is also a stand-alone tool when installed in Sovereign handle. The Medium Ultima Blade enables woodturners to produce hollow forms in both wet and dry woods. It has a cutter system that slices through the wood rather than scraping and the clever design allows the shavings to clear without clogging. It is...

Excelsior Ultima Cutter (SOV-ULTCUTG) The Robert Sorby Sovereign Ultima Cutter delivers the optimum performance level when creating hollow forms. It can be used equally well on wet or dry end grain timber and is designed to deliver exceptionally high performance to meet the demands of the Sovereign Ultima hollowing tool. The titanium nitride version of the cutter adds wear resistance and...

Ultima Head without cutter (SOV-ULTMHEAD) The Sovereign Ultima hollowing system uses a high performance cutter system with self-clearing head design allowing for fast and effortless waste removal. Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel. The multi- variable configuration head and link system allows the tool to be used in a variety of...

Small Ultima Link (SOV-ULTLS) Simply one of the finest hollowing systems on the market. Works equally well on wet or dry grain end timber. The Sovereign Ultima hollowing system uses a high performance cutter system with self clearing head design allowing for fast and effortless waste removal. Depth of cut can be finely tuned by altering the cut adjustment cap using the micro-adjust wheel. The...

Ultima Cutter Sharp Jig (SOV-ULTCSJ) To make sharpening quick and convenient there is also a dedicated sharpening jig. The main section is made from phosphor bronze which allows it to rotate freely within the sleeve. This means it can be used either with a diamond file, bench grinder of ProEdge. It will also man other full round cutters.

Collets for the Sovereign system. SOV-C06 The SOV-C06 has the narrowest aperture and is suitable for the ¼” Spindle gouge There are also a few tools that require no collet and fit directly into 1/4” shank end of the Sovereign handle. Among these are the 1/2” and 3/4” bowl gouges, the 1/2” fingernail bowl gouge and the extra long multi tip hollowing tool. SOV-C10 The...

Sovereign Counterweight (SOV-CW) There is an internal thread in the end cap allowing for the fitting of a counterweight. This means that the weight is always in the bottom of the handle where you want it.