7mm Barrel Trimmer Tool
SG174
A very useful device to square off the end of the wood blank once the brass tube has been glued in.It also cleans off the burr at the end of the brass tube as well as cleaning out any excess glue.Ideal tool prior to assembling on a pen mandrel.For use with 7mm tubes.
Barrel Trimmer Sleeves
TRIMSET
Trimming Sleeve Set >br> The 9 sleeve sizes will insert into tube sizes: 8mm, 11/32 in., 3/8 in., 10mm* , 25/64, 10.5mm, 27/64 in., 15/32 in., 31/64 in., 12.5mm, 33/64 in., 9/16 in., 37/64 in. (some sleeves will work with multiple tubes). Packed in carry case with instruction sheet. Sleeves are 2-1/2 in.long.
Disassembly Punch Set
DISSET
Salvage your pen parts, replace components, exchange components and help avoid buying new pen parts with this versatile kit.Disassembles nearly all pen and pencil kits with tubes and components of any size.Includes 28 rods from 3/32" to 17/32" in diameter including rods small enough to feed through twist mechanisms to pop off pen tips and rods large enough to remove components from very large pens.Complete...
Pen Assembler 1Mt
TRPA1
Assembling Pens is very rewarding after spending time turning them, but unfortunately, this can be the most difficult part.Turners Retreat is proud to introduce to their range of pen turning tools, the Pen Assembler.Available in 1 or 2 Morse tapers this assembler fits easily on the lathe for easy construction of 7mm pens and pencils using the lathe as a clamping system.Made of high quality plastic...
Pen Assembler 2Mt
TRPA2
Assembling Pens is very rewarding after spending time turning them, but unfortunately, this can be the most difficult part.Turners Retreat is proud to introduce to their range of pen turning tools, the Pen Assembler.Available in 1 or 2 Morse tapers this assembler fits easily on the lathe for easy construction of 7mm pens and pencils using the lathe as a clamping system.Made of high quality plastic...
Pen Blank Drilling Centre Vice
PBDCV
Drill through the exact centre of your pen blanks.
The jaws on the drilling centre move in and out together to insure precision centre drilling of your blanks.
Just set up the vice once and drill all of your blanks the exact centre. There is no need to change the setup regardless of the blanks size or shape. Holds blanks up to 1 7/8" square. The vice now includes a "scrap waste sleeve" just a 2"...
Pen Blank Drilling Jaws - Vertical
VPBDJ
Use these aluminium utility jaws to convert your drill press vice into a great new pen blank drilling accessory.The jaws include grooves cut vertically to support your pen blank for drilling.Horizontal grooves allow you to position a turned barrel or plain brass tube horizontally for cutting or squaring.The jaws easily drop onto your drill press vice and attach magnetically (to jaws over 1 high).Great...
Soft Grip Locking Pliers
DISGRIP
These locking soft grip pliers make pen disassembly a breeze.The non-marring soft grip securely grasps finished tubes from .35" (slimline) through 1" diameter.The 7" pliers locks and holds your tube securely while you punch out the internal components.Helps dislodge the tightest and most difficult to remove components.For best results, use with Pen Disassembly Punch set
Tube Inserter
TI70
A simple tool for inserting your glued up pen tubes into your blanks. This tapered, chrome plated tool works with tubes from 7mm to 11mm diameter. It keeps your fingers clean and safe from residual glue. Easy clean up.