Sort By
Per Page
View
Grid
List
6" - Gents Saw
PAXG
The perfect partner to the PAX quality hand and tenon saw, this saw has an alloy steel blade with a mirror finish, high quality, brass back and an attractively finished rosewood handle as standard.20tpi
8" Traditional Dovetail Saw
DS820
Robert Sorby 8″ Traditional Dovetail Saw
Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints.
Made from alloy spring steel
Laser marked with Kangaroo logo
Stained Sapele handle
Straight tooth line
Hand sharpened blade,...
10" Traditional Brass Back Tenon Saw
TR9540B-91
Spear & Jackson Traditional Brass Back Woodworking Saw 10" x 15pts
This Traditional Brass Back Hand Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials.
Universal teeth for general use, cuts along and across the grain
Brass back for maximum rigidity
Comfortable, strong wooden handle securely fixed by rivets
High carbon steel blade
...
12" Traditional Tenon Saw
TS1213
Robert Sorby 12″ Traditional Tenon Saw
Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade,...
12" Traditional Brass Back Tenon Saw
TR9550B
Spear & Jackson Traditional Brass Back Woodworking Saw 12" x 15pts
This Traditional Brass Back Saw is primarily for joint cutting and sawing small pieces of wood and wood based materials.
Universal teeth for general use, cuts along and across the grain
Brass back for maximum rigidity
Comfortable, strong wooden handle securely fixed by rivets
High carbon steel blade
...
22” Traditional Panel Saw
PS2210
Robert Sorby 22” Traditional Panel Saw
The Robert Sorby Kangaroo Panel Saw is taper ground and has 10tpi. Universal teeth for general use, cutting across the grain to give a finer finish than larger toothed handsaws.
Made from alloy spring steel
Laser marked with Kangaroo logo
Sapele handle
Straight tooth line
Hand sharpened blade, can be re-sharpened
Brass plated screws and...
Jewellers Saw
PAXJ
The Pax jewellers saw has a very thin alloy steel blade with a mirror finish high quality brass back.
The same high quality and attractively finished rosewood handle is standard and suitable for the highest precision work. 20tpi as standard, blade length 6".
For cutting very small pieces of soft metals - the saw has no set on the teeth
Walnut Handle with Brass Ferrule
Mirror Polished...
Razor Saw
PAXR
The Pax Razor Saw is made to the same specification as the jewellers saw but has 40tpi with a 6" blade.
It is suitable for high precision work and will give an excellent finish.
Walnut Handle with Brass Ferrule
Mirror Polished Brass Back
Etched with PAX logo
Flush Cut Saw
PAXF
The Pax flush cutting saw has a flexible alloy steel blade which cuts on the pull stroke. This saw is very suited for cutting dowels etc.
The same high quality and attractively finished walnut handle is standard and is suitable for the highest precision of work. 20tpi as standard, blade length 6".
Special Flexible blade for cutting dowels flush against the surface of wood - no set means...