TMI Products
Adapter M33 x 3.5 Female To 1" x 8tpi Male
A868
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two. No Lock Spindle Washers
3" - 75mm - Vacuum Head 1 1/4 x 8tpi
V803-125
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
3" - 75mm - Vacuum Head 1 x 8 tpi
V803-1
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
3" - 75mm - Vacuum Head 33 x 3.5
V803-33
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
Chuck Reversing Adapter
A87
This chuck reversing adapter features a 2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck.Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock.By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly...
Spindle Adaptor 33M F 1.25 x 8 M
A869
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 33i F to 1 1/4" x 8 M
Spindle Extender 1" x 8tpi
A861
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock 1" x 8tpi
Stabilizing Resin & Catalyst
350-G
To be used with the Stabilising System, this resin has a low viscosity which assists greater wood penetration.A low cure working temperature of 200F allows the cure to be in a small toaster type oven.It can be coloured with dye that will add dramatic effects.Uncatalyzed it has a 3 year shelf life, after adding catalyst the shelf life is 3 months.The tanks can be cleaned with soap and water.
Vacuum Stabilization Chamber Kits
V820
Resin stabilised wood gives new life to woods that would normally not be usable for turning.Woods that tend to crack and check, such as spalted woods, can now become solid.Runs with a standard air compressor (minimum 2.5cfm @ 55-65psi) using the same V811 Vacuum Generator as the Vacuum Chuck.The stabilising system provides the optimum in versatility and economy in wood stabilisation.This kit includes...
6" - Vacuum Head
V806
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
8" - Vacuum Head
V808
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
Spindle Extender 1.125 x 8tpi
A862
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock 1 1/4" x 8tpi
33 x 3.5 - Spindle Extender
A863
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock. 33mm
Adapter 1 x 8 Female To 1 1/4" x 8 Male
A864
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1" x 8tpi F to 1 1/4" x 8tpi M
Spindle Adaptor 1.25-8 F 1 x 8 M
A866
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1 1/4" x 8tpi F to 1" x 8tpi M
Adapter 1 1/4" x 8 Female To 33mm Male
A867
Spindle Adapters have a hole for vacuum applications. Can be used on standard non-vacuum chuck heads. Flats on extenders allow for easy removal with wrench if necessary. Each adapter includes two No Lock Spindle Washers 1 1/4" x 8tpi F to 33mm M
2 Quart Tank
V822
Resin stabilised wood gives new life to woods that would normally not be usable for turning.Woods that tend to crack and check, such as spalted woods, can now become solid.Runs with a standard air compressor (minimum 2.5cfm @ 55-65psi) using the same V811 Vacuum Generator as the Vacuum Chuck.The stabilising system provides the optimum in versatility and economy in wood stabilisation.This is the 2 quart...