Profiled Leather Honing Wheel-Tormek
LA-120
This wheel has exchangeable leather discs so you can easily replace a disc with a worn tip.Discs with alternative, narrower profiles are available as optional extra.The two standard discs have a radius of 3mm (1/8') and a 60 tip.The set of optional extra discs have a radius of 2mm (3/32') and a 45 tip.These smaller disc profiles permit the honing of small carving tools with very narrow profiles.The...
Tormek - Planer / Jointer
SVH-320
The attachment comprises support, blade holder and allen key.In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth.This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding.It is important that the grinding angle is set with great accuracy.If you follow the detailed step by step...
Tormek - Centering Knife Jig
KJ-45
Get sharp and get even with the Tormek KJ-45 Centring Knife Jig. It works with both Tormek T-4 and Tormek T-8 machines, as well as older models.
Using the KJ-45 you can achieve symmetrical bevels with the same angle on both sides of your knife, regardless of the thickness or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thick utility knife, you'll get the...
Tormek - Scissor Jig
SVX-150
The jig for scissors sharpening comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the scissors thickness with the screw. You lock the scissors by tightening the knob. The support plate has a sliding surface, so the holder with the scissors can easily be...
Honing Compound For La-220
PA-70
One application lasts for 5 - 10 tools.Then re-impregnate the honing wheel with a few drops of oil and apply fresh honing compound.Work the honing compound into the leather.Do not let the compound dry, apply more oil if necessary
Diamond Truing Tool
TT-50
With this unique tool, Tormek TT-50, you can true and dress your grindstone exactly round and flat.It mounts and locks instantly on the Tormek Universal Support.The tool is guided by the Universal Support, which also guides the jigs.This ensures that the stone surface is always parallel to the tool fitted in the jig.
Tormek - Multi Jig
SVS-50
This patented jig consists of a housing and two interchangeable seats one closed, and one open, The seats can swivel and be locked with the screw at any skew angle between 0-45º . Skew chisels have symmetrical bevels on both sides. With this jig you mount the tool only once for grinding both the bevels. By turning the jig upside down you can grind both of the bevels symmetrically.
Tormek - Universal Gouge Jig
SVD-186
Use the SVD-186 for sharpening woodturning gouges (bowl, spindle and fingernail) to a razor like edge. The Tormek SVD-186 can also handle most carving gouges up to 36mm wide, carving vee tools and multi-tip scraper blades with mounting holes from 5mm to 8mm diameter. The SVD-186 and Tormek wetstone machine combination offers three crucial benefits. The water cooled wheel results in a superior edge,...
Turning Tool Setter
TTS-100
This patented Turning Tool Setter perfects the Tormek Sharpening System for woodturning tools. It enables you to exactly create and replicate the edge on your bowl and spindle gouges as well as on your flat or oval skews with either a straight or a curved edge. The Setter works in conjunction with the Gouge Jig SVD-185 and the Multi Jig SVS-50.The strength of the TTS-100 Setter is that it works irrespectively...
Horizontal Base For Universal Support
XB-100
You'll have better control when sharpening turning tools and carving tools if the stone is turning away from the cutting edge.By adding the Tormek Horizontal Base to your older TORMEK you can move the Universal Support from vertical mount (wheel turning into edge) to horizontal mount (wheel turning away from edge).The Owner's Handbook gives you recommended mounts for various tools and jigs.Includes...
Tormek - Sp-650 Stone Grader
SP-650
The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening.This has obvious advantages.You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same setting of the jig.Besides being a very fast method, you achieve a perfect edge...
Tormek - Tool Rest with Torlock
SVD-110
This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. Large scorps and inshaves.Also for cabinet scrapers and hollowing tools.It has a generous surface, 90-110mm (3'-4'), which permits a safe and steady positioning of the tool towards the stone.The bore is made with a special wedge shape, which increases the locking force by 250 %.You can lock the Tool...
Machine Cover Tormek
MH-380
Protective Cover keeps dust off your Tormek Grinder and prevents it singing at night.
Tormek Original Grindstone 200mm
SG-200
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life.
This grinding stone is the ideal choice when you want both efficient steel removal and a fine finish in the same stone over a wide variety of materials, from carbon steel to high speed steel. It works with all types of tools and steel qualities...
