9014 - 1/2 Flexible Point Drive Centre
9014 - 1/2 Flexible Point Drive Centre 9019
The NOVA 9019 1/2? Flexible Point Drive Center is a clever design popular among spindle turners. The “Flexible Point” spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive center teeth bite into the wood. With light pressure, it will drive your work, but allow it to stop...
£46.50
9020 - 7/8" Flexible Point Drive Centre
9020 - 7/8" Flexible Point Drive Centre 9020
The NOVA 9020 7/8 Inch Flexible Point Drive Center is a clever design which is popular among spindle turners. The “Flexible Point” spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive center teeth bite into the wood. With light pressure, it will drive your work but allow...
£46.50

9021 - 1.1/4" Flexible Point Drive Centre
9021 - 1.1/4" Flexible Point Drive Centre 9021
The NOVA 9021 1-1/4 Inch Flexible Point Drive Center is a clever design popular among spindle turners. The “Flexible Point” spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive center teeth bite into the wood. With light pressure, it will drive your work, but allow it to...
£52.50
JS70N - NOVA 70mm Mini Jaws
JS70N - NOVA 70mm Mini Jaws JS70N
• Perfect for bowl and spigot projects. Expanded dovetail and reverse dovetail holds for gripping footed bowls. • Made from K1045 steel • The standard Woodworm Screw (included with Nova chucks) can be used with these jaws. • Designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength. • Special Nova dovetail profile. Designed for maximum...
£39.99

NOVA Chuck Insert 1.1/8 x 12
NOVA Chuck Insert 1.1/8 x 12 IUNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
NOVA Chuck Insert 3/4 x 16
NOVA Chuck Insert 3/4 x 16 I9NS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99

NOVA Chuck Insert 5/8 plain bore - unthreaded
NOVA Chuck Insert 5/8 plain bore - unthreaded ISNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99