Woodworking Gifts

This zip fronted smock has two generous back pockets to keep items safely out of the way but always close at hand. There is also a left sleeve pencil pocket. Velcro cuffs and neckband give added comfort. These smocks allow for a sweater to be worn underneath during winter whilst remaining cool in summer. Sizes available: Medium: 48" chest Large: 50" chest X Large: 52"...

This Universal Drill Press Laser projects a thin set of cross-hairs onto your drill press table precisely where the drill bit will contact the work piece. It allows the user to quickly position and clamp the work piece in place, so that the hole is drilled exactly where needed. This eliminates the need to repeatedly lower the bit to the surface and align the tip of the bit to the desired hole location. The...

Robert Sorby 12″ Traditional Tenon Saw Tenon saws are commonly used to make the tenons used in mortise and tenon joints. These saws can be used on hard and soft woods. The 13tpi allows you to have more control over the depth and direction of the cut you are making. Made from alloy spring steel Laser marked with Kangaroo logo Sapele handle Straight tooth line Hand sharpened blade,...

Spear & Jackson Traditional Professional Woodworking Tenon Saw 10" x 13pts The Spear & Jackson Traditional Professional Tenon Saw is used for joint cutting & sawing small pieces of wood Universal teeth for general use, cuts along and across the grain Precision cross ground teeth for extra sharpness Solid brass back for maximum rigidity Comfortable wooden handle secured...

Robert Sorby 8″ Traditional Dovetail Saw Dovetail saws generally have thinner blades with a greater number of teeth per inch. Primarily used for work that require small, very precise cuts, typically in joint making including dovetail and small tenon joints. Made from alloy spring steel Laser marked with Kangaroo logo Stained Sapele handle Straight tooth line Hand sharpened blade,...

Spear & Jackson 22" (559mm) x 10pts Traditional Skew Back Saw A general purpose saw for use along and across the grain. 22" (559mm) harden and tempered carbon steel blade 10 PPI Resharpenable teeth Precision cross ground Riveted wooden handle Fast cut - rapid, clean cutting action Skew back for balance and reduced friction Ideal for cutting planed wood, architraves,...

Spear & Jackson Carpenters Sliding Bevel Carpenters Sliding Bevel. Rosewood Stained Hardwood with Brass Top and Bottom end plates. Hardwood stock Brass top and bottom end plates Spring steel blade Available in 7.5", 9" or 10" inch

Spear & Jackson Carpenter's Marking Gauge 8" Rosewood Stained Hardwood with two brass plates on the working face, round brass bar through top section & brass lock screw on top. Block size: 66 x 55 x 28 ± 1mm Brass Plates in Block: 7 x 3mm Brass Bar in Block: 12mm diameter Hardwood stock and beam Brass wear plates and locking screw Internal brass thread

Heavy Duty One Handed Bar Clamp High quality aluminium heavy duty one handed bar clamps and spreaders for a variety of wood working applications. Body is manufactured from aluminium with a carbon steel bar Throat Depth: 85mm (3 3/8") Sizes and Details EOHBC6-HD: Clamping Capacity 150mm (6") Minimum Spreading Capacity 168mm (6 5/8") Maximum Spreading Capacity 355mm...

Spear & Jackson No. 5 Carpenters Jack Plane No. 5 Jack Plane. Ideal for the initial preparation of rough timber. Cast iron body Precision milled base and faces 50mm wide high carbon steel blade Brass adjusting screw

Four Piece Carpenter's Tool Set A carpenter's tool set featuring a sliding bevel, carpenter's try square, mortice gauge and smoothing plane. Hardwood handles Brass fittings Spring steel handles Tools included in the set 9"/230mm Sliding Bevel 9"/230mm Carpenters Set Square 8"/200mm Mortice Gauge No.4 Smoothing Plane

Spear & Jackson Predator 10" (254mm) x 15pts Tenon Saw A fine cutting saw for use along and across the grain. 10" (254mm) harden and tempered carbon steel blade 15 PPI Hard Pointed teeth High Impact Polystyrene handle Soft feel non-slip grip Fine cut - smooth, clean cutting action Solid steel back for maximum rigidity Ideal for tenon joints, mouldings, dowelling,...

Magnetic Tray ideal for holding tools, nuts, bolts etc. Magnetic both sides - can be used at any angle Features a rubber coated magnetic base to protect surfaces from wear or scuffing Ideal for use in awkward locations to retain tools, screws, bolts etc Premium quality tool tray with stainless steel finish Size 240mm x 140mm Accessories not included.

Spear & Jackson Predator 12" (305mm) x 15pts Tenon Saw A fine cutting saw for use along and across the grain. 12" (305mm) harden and tempered carbon steel blade 15 PPI Hard Pointed teeth High Impact Polystyrene handle Soft feel non-slip grip Fine cut - smooth, clean cutting action Solid steel back for maximum rigidity Ideal for tenon joints, mouldings, dowelling,...