Sort By
Per Page
View
Grid
List
Jaw & Collet Tool
817
Designed to cut the perfect dovetail required on a tenon or in a recess when mounting a timber blank on the jaw or collets of a woodturning chuck.
Relief Cutting Tool
895H
The Relief Cutting Tool enables the turner to produce a recess prior to threading.
Crush Grind Tool with One Notch
B895CG1
Robert Sorby Crush Grind Tool
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly.
The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand side allows the...
Crush Grind Tool with Two Notches
B895CG2
Robert Sorby Crush Grind Tool with Two Notches
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly.
The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand...
Ring Tool HSS
B845133
Robert Sorby Ring Tool 1/2" - 13mm. High Speed Steel, available handled or unhandled.
Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels.
This tool produces an unrivalled surface finish on end grain.
Ideal for goblets and egg cups.
Comes complete with full instructions.
Thread Cutters
890
If you have been making lidded boxes for a while the next step is to started producing threaded lids. This is not a project for the novice or the faint hearted.
Producing threads needs a lot of practice and a steady hand but once mastered this technique adds significant value to your project. These Robert Sorby thread cutters were designed in conjunction with master turner Robert Sorby and have...
Texturing Tool
310
This is a novel tool which will enhance the visual and tactile qualities of even the most bland piece of wood.By rubbing the cutter across the turned project an interesting textured effect can be created.The texture pattern can altered by changing the angle of the cutter, the speed of the lathe, the position of the tool rest and the type of wood.The range of textures can vary from an orange peel effect...
Spiralling Tool
320-330
Creating barley twists, spirals and flutes has always represented a problem for the woodturner.
The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner's imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions...
Toolrest
360
The tool rest enables those who already possess a Texturing Tool to convert it to a Spiralling System.
Texturing Cutter
350-0
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects. One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results. Sharpening:...
Spiralling Cutter
350
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects. One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results. Sharpening:...
Modular Micro Spiralling Tool (Unhandled)
370/0
The unhandled micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling System (B320, B320S).
This tool is also available with a handle (B370/A).
A further texturing cutter is available as an optional extra.
Micro Texturing Cutter
370
The Robert Sorby Fine Micro Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of small spiral patterns and textures on a range of projects including bowls, vases and boxes. One of three cutters for the Modular Micro Spiralling Tool. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results.
Sharpening:...
Sovereign Spiralling & Texturing Tool Set
TSOV-3370DBS
For decorative woodturning, this set is an absolute must! Features both the full size and modular micro systems to deliver a multitude of decorative shapes and patterns.
Set includes unhandled spiralling system, texturing cutter, spiralling cutters 2mm, 4mm and 6mm pitches, unhandled modular micro spiralling tool, 2 micro spiralling cutters and micro texturing cutter, 12" Sovereign handle,...
Thread Cutting & Eccentric Chuck DVD
RSDVDTCEC
50 mins.A unique instructional DVD showing you how to form internal & external threads.This is a must for anyone making an initial attempt to cut threads on turned projects.Several projects are shown in depth.
Chattertool Kit
RS215KT
The Chattertool creates random decorative patterns on end grain only.That makes it ideal for box lids and jewellery.Each pattern created is unique as it is determined by the shape of the cutter, the speed of the lathe, the length of protrusion of the blade, and the type of wood.Because of the random nature of these decorations they are unrepeatable unless exactly the same conditions exist.The Chattertool...
