Nova

Nova


no image available
5668010 - Power Relay Switch for Galaxi Lathe 5668010
Standard with most NOVA Chucks. Quick and easy method to mount unformed small bowl blanks. Secure mounting to form the outside of bowls. Strong thin form screw to cut into wood.
4" Modular Tool Rest Bar
4" Modular Tool Rest Bar 9026
Economical modular system, mix and match to create your customized Toolrest - Interchangeable 5/8? and 1? Toolposts and 4?, 6?, 12? and Bowl and Box Rests Bars - Made from cast iron and stainless steel for long life and protection from rust caused by wet wood - M10 x 1.5 thread size - Requires one of the NOVA Tool Rest Posts (additional purchase) - Enables you to unfasten NOVA Tool Rest Posts and...
£19.99

NOVA 25mm JawsNOVA 25mm Jaws
NOVA 25mm Jaws JS25N
The 25mm jaw set substitutes for the standard 50mm jaws for use on small work with 3/8"-1-1/4" spigots, as a type of pin chuck with 1" capacity, for expanding dovetail work on bowls up to 6" dia. and for 1/2"-1" square blanks. - A quick and easy workholding solution for small bowls and small unsupported spigot work. - A great range of smaller projects can be mounted and turned using either the expansion...
£34.99
NOVA 28mm Mini Step Jaws
NOVA 28mm Mini Step Jaws 6025
The NOVA 6025 Mini Step Chuck Accessory Jaw has three step sizes providing optimum gripping of 3 base sizes with minimal crush damage to wood. The internal has a spigot grip for small unsupported or supported spindle work. - Precisely machined from a single solid piece of 1045 high tensile steel for precise closing, durability, maximum structural strength, and long life. - The standard Woodworm...
£39.99

NOVA 45mm Spigot Jaws
NOVA 45mm Spigot Jaws JS-SP45
Designed for expanded dovetail and reverse dovetail for gripping footed bowls - One of the most popular accessories for mounting 12-14" bowls - Same jaw fixing system across all NOVA chuck models ? total system interchangeability - All NOVA chuck accessory jaws are designed to hold in the expansion and contraction modes EXPANDING GRIP 96.8mm (3.81?) ? 118mm (4.64?) CONTRACTING GRIP Square: 77mm...
£47.99
NOVA 70mm Mini Jaws
NOVA 70mm Mini Jaws JS70N
Perfect for bowl and spigot projects. Expanded dovetail and reverse dovetail holds for gripping footed bowls. - Made from K1045 steel - The standard Woodworm Screw (included with Nova chucks) can be used with these jaws. - Designed so the jaws cut into the wood, grip firmly in the contraction mode and provide high tear out strength. - Special Nova dovetail profile. Designed for maximum strength...
£39.99

NOVA 76mm Power Grip JawsNOVA 76mm Power Grip Jaws
NOVA 76mm Power Grip Jaws PJSN
The most powerful jaw available for large spigot/hollow turning - Great multipurpose jaw for bowl and hollow form turners - Suitable for NOVA SuperNOVA2 and NOVA Titan Chucks only - Included as standard with all NOVA Titan Chucks EXPANDING GRIP 95mm (3.74?) ? 116mm (4.56?) CONTRACTING GRIP Square: 76mm (2.99?) ? 55mm (2.16?) Spigot: 97.8mm (3.85?) ? 77mm (3.03?)
£39.99
NOVA Chuck Insert 1" x 10tpi LH
NOVA Chuck Insert 1" x 10tpi LH IMNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99

NOVA Chuck Insert 3/4" x 16tpi
NOVA Chuck Insert 3/4" x 16tpi I9NS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
NOVA Chuck Insert 7/8" x 12tpi
NOVA Chuck Insert 7/8" x 12tpi I8NS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99

NOVA Chuck Insert 7/8" x 14tpi
NOVA Chuck Insert 7/8" x 14tpi IVNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
NOVA Chuck Insert M18 x 2.5
NOVA Chuck Insert M18 x 2.5 IKNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99

NOVA Dovetail Chisel
NOVA Dovetail Chisel 6008
Accessory for NOVA Chucks to quickly and accurately make the dovetail recess for the chucking of a bowl. Ensures a dovetail with a sharp, clean edge to precisely match to the dovetail contour of NOVA Accessory Jaws. Creates maximum holding power to your NOVA Chuck. Scaled with a handy mark out scale for use as a guide.
£29.99
NOVA G3 Chuck w/25mm Jaws (1" x8tpi direct thread)
NOVA G3 Chuck w/25mm Jaws (1" x8tpi direct thread) 48270
Powerful and fast Tuff Lock? geared action for smaller lathes - Convenient one handed operation with T bar handle ? more time turning, less time preparing - Open back for easy cleaning and to reduce weight on smaller lathe spindles - 4-Jaws Lock down solidly - Fits full range of NOVA Chuck Accessories - Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly - Precision...
£119.99

NOVA Soft Grip Jaws
NOVA Soft Grip Jaws 6021
NOVA 6021 Soft Chuck Accessory Jaw Set an accessory for NOVA Chucks, designed to expand your range and capacity of your standard NOVA Chuck for specific projects and applications. 4 segments of soft nylon Cut and customize yourself to your specific holding requirements Markless holding Thick jaw body give maximum flexibility of design Uses standard fasteners supplied with your NOVA Chuck
£16.99
SAFELOCK Woodworm Screw for Cole Jaws
SAFELOCK Woodworm Screw for Cole Jaws WWCJ
This Woodworm screw fits into the NOVA Cole jaws. It is longer than the standard screw to allow it to protrude sufficiently beyond the jaw. The major advantage is the support the Cole jaws offer to the back of the blank, especially when turning larger diameter blanks. The strong thin edged thread form cuts into wood for maximum holding power. The threads are 2mm deep with a 7mm diameter core. The...
£14.99

SuperNOVA2 Chuck Companion (M33 x 3.5)
SuperNOVA2 Chuck Companion (M33 x 3.5) 23073
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. It has unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides and Comfortable T Bar Handle. Powerful patented Tuff Lockā„¢ gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration...
£99.99
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (insert req)
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (insert req) 23250
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2" Jaws come standard. Powerful patented Tuff Lock? gearing with precise, hardened action. Delivers incredibly smooth strength...
£159.99

SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (M33 x 3.5mm direct thread)
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (M33 x 3.5mm direct thread) 23253
Powerful and fast Tuff Lock? geared action - Unique tilt away T Bar handle for easy and convenient access - Composite indexing backing plate reinforced with stranded glass fibres for extra strength - Fits full range of NOVA Chuck Accessories - Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly - Precision machined from solid steel - 4-Jaws Lock down solidly ...
£149.99
SuperNOVA2 Chuck w/Pin Jaws (1.1/4" x 8tpi direct thread)
SuperNOVA2 Chuck w/Pin Jaws (1.1/4" x 8tpi direct thread) 23251
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2" Jaws come standard. Powerful patented Tuff Lock? gearing with precise, hardened action. Delivers incredibly smooth strength...
£149.99

Toolpost Rest 1" x 5"
Toolpost Rest 1" x 5" 9025
This is part of the modular NOVA Tool Rest System, a flexible system which allows you to mix and match your Toolrest Posts and supports to create the perfect tool rest for your needs. Requires one of the NOVA Tool Rest Bars (additional purchase). This threaded post enables you to unfasten different NOVA tool rest bars and attach as needed. The 1?/25.4mm shaft with 5 inch/127mm length, can fit to most...
£10.99
Toolpost Rest 1" x 6"
Toolpost Rest 1" x 6" 9031
Fits most mini lathe Toolslides. This is part of the modular NOVA Tool Rest System, a flexible system which allows you to mix and match your Toolrest Posts and Supports to create the perfect Toolrest for your needs. Requires one of the NOVA Tool Rest Bars (additional purchase) The 5/8 inch shaft and is 3-1/4 inch/196mm long, can fit to most Mini Lathe Toolside shafts. This threaded post enables you...
£12.99

Universal Spanner
Universal Spanner 23079
NOVA 23079 Universal Chuck Spanner Accessory is a handy NOVA Chuck Accessory. Fits all NOVA Chucks to quickly and easily loosen the chuck and chuck insert/adaptors from your lathe spindle. Features over 4 different NOVA specific functions in the one tool. - Ideal for removing your NOVA chuck insert/adaptors from your lathe - Handy NOVA Chuck essential tool - Solid steel for long life - Fits all NOVA...
£14.99
NOVA Comet II Lathe with G3 Reversible ChuckNOVA Comet II Lathe with G3 Reversible Chuck
NOVA Comet II Lathe with G3 Reversible Chuck 46401
Portable, space saving yet delivers the capacity and the rugged stability of larger lathes. With the NOVA's unique Versaturn Accessories you can transform your NOVA Comet II Midi Lathe into an all-in-one woodturning and woodworking system. The NOVA Comet II Midi Lathe is perfect for a wide range of woodworking projects. Includes free NOVA G3 Reversible Chuck. Weight: 77.2lbs (35Kgs) Packaged....
£599.99
Page: 1 | 2 | 3 | 4 |