Indexing System
Indexing System 763
The unique Robert Sorby Universal Indexing System (763) allows the turner to accurately divide and locate the workpiece in one of 24 positions. This is a datum point from which a whole host of patterns can be created. Precise locking of the workpiece allows for accurate boring or carving An innovative Indexing System, not dependent on a chuck Supplied with full instructions Available in sizes to fit...
from £68.95
Precision Boring Kit - Metric
Precision Boring Kit - Metric 765
Inlaying adds character. A Precision Boring System is used in conjunction with the Indexing System for accurate hole boring in work pieces. Pre-bored hardened steel inserts are available in metric - 6, 9 and 12mm (765) - or imperial inches - 1/4", 3/8" and 1/2" (765I). Corresponding HSS brad point bits ensure total accuracy when drilling. For use in conjunction with the Indexing SystemFull instructions...
£49.25

Precision Boring Kit - Imperial
Precision Boring Kit - Imperial 765I
Inlaying adds character. A Precision Boring System is used in conjunction with the Indexing System for accurate hole boring in work pieces. Pre-bored hardened steel inserts are available in metric - 6, 9 and 12mm (765) - or imperial inches - 1/4", 3/8" and 1/2" (765I). Corresponding HSS brad point bits ensure total accuracy when drilling. For use in conjunction with the Indexing SystemFull instructions...
£49.25
Tool Rest StemTool Rest Stem
Tool Rest Stem 765-S
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9"as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£8.95

Cross BarCross Bar
Cross Bar 766
These crossbars are specially hardened to avoid those irritating little nicks, so that your tool moves along smoothly.Available in 4", 6" and 9" lengths.
from £16.15
9" - Bowl Crossbar - Internal9" - Bowl Crossbar - Internal
9" - Bowl Crossbar - Internal 767
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£23.50

9" - Bowl Crossbar - External
9" - Bowl Crossbar - External 767E
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£23.50
Box Scraper Platform
Box Scraper Platform 768
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9" as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£10.00

StebcentreStebcentre
Stebcentre STBCENTRE
The original Stebcentre is a lathe drive centre with several unique features.It uses razor sharp serrated teeth to grip the work piece, without the need for pre-marking the wood with the drive prior to putting it onto the lathe.The greatest benefit the Stebcentre has over any other driver available on the market is the spring loaded centre point.Pressure can be applied so the wood can be driven with...
from £42.40
Revolving StebcentreRevolving Stebcentre
Revolving Stebcentre REVSTEBCEN
A revolutionary idea of using a revolving live centre with the head of a Stebcentre.This allows for basic off-centre work to be achieved, such as cabriolet candlesticks as well as multi-sided boxes and even small multi-sided bowls when used in conjunction with an original Stebcentre or the new Steb Drive.
from £49.40

Steb DriveSteb Drive
Steb Drive STBCHUCK
The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.
from £42.40
Mt1 To Mt2 Sleeve
Mt1 To Mt2 Sleeve MT1-MT2
Morse taper sleeve 1MT - 2MT
£9.99

Drive Centre
Drive Centre DRIVECENTR
Suitable for all types of spindle work.Integral points will not work loose. Removable with extractor ring. 4 prong for squared spindle ends, 2 prong for out of square spindle ends.
from £16.25
Revolving Centre - Kit
Revolving Centre - Kit REVKITCEN
Revolving Centre Sets comprise a high quality hollow revolving centre and seven popular accessories in a sturdy fitted storage box. These sets feature a stub morse taper fitting. Comes complete with ejector tool.
£66.90

Revolving Centre - Deluxe
Revolving Centre - Deluxe REVDXCEN
Robert Sorby Deluxe Hollow Revolving Centre 2MTThis revolving centre comes with a 60° removable point, the most popular workhorse in the range of accessories for this tool. Comes complete with convenient ejector tool. It is a high quality live centre made to last. This tool is 2 morse taper.
£49.35
Slim Deluxe Rotating Centre
Slim Deluxe Rotating Centre SDRC
Slim, Deluxe Rotating Centre. 12mm dia. nose with 60 deg. point. Main body remains stationary while small point turns. Ideal for smaller precision work as well as general spindle turning. Triple bearing design incorporating thrust race.
£45.50

Standard - Rotating Centre
Standard - Rotating Centre SRCMT
Standard Duty Rotating Centre. 31mm dia. head with 60 deg. point. Excellent general purpose centre. Twin deep groove ball races.
£29.95
2Mt - Arbor
2Mt - Arbor A610
Morse taper arbor to suit keyed and keyless chucks as used on many pillar drills and lathes. The arbor has a JT6 taper to accept the chuck.
£6.71