Pen Blank Drilling Jaws
Pen Blank Drilling Jaws PBDJ
These Jaws will hold your pen blank central so you can drill on the lathe.A groove in both jaws ensure you have a tight secure grip of the pen blank.Mount your drill chuck into your tailstock and simply wind in the drill.With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.These jaws have been designed to fit a Robert...
£27.20
Faceplate RingFaceplate Ring
Faceplate Ring FACERING
Designed with an internal dovetail to fit securely on to the standard 2" (50m) jaws.These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting.Available with an outer diameter of 3 1/8" (80mm) and 4 3/4" (120mm).
from £17.15

Woodworm Screw - R/H
Woodworm Screw - R/H RSPS
Parallel thread for extra grip, fits directly into 50mm jaws.Also fits all Nova chucks.
£14.19
Mini Screw Chuck
Mini Screw Chuck 649
An inexpensive mini screw chuck suitable for miniature projects that fits into the jaws of the Patriot woodturning chuck
£19.00

Patriot Drive Centre
Patriot Drive Centre RSPDC
A simple but effective 4 prong drive centre that fits directly on to the jaws of the chuck.
£16.25
Steb DriveSteb Drive
Steb Drive STBCHUCK
The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.
from £42.40

Longworth Style Chuck 10"
Longworth Style Chuck 10" LSC10
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve.The Longworth style chuck makes it easy.This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds.Designed for clamping in a traditional 4 jaw-self-centering chuck using standard 50mm dovetail jaws.It eliminates the time and hassle of removing...
£99.95
12" - 300mm - Longworth Chuck
12" - 300mm - Longworth Chuck LSC12
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve.The Longworth style chuck makes it easy.This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds.Designed for clamping in a traditional 4 jaw-self-centering chuck using standard 50mm dovetail jaws.It eliminates the time and hassle of removing...
£119.95

14" - 355mm - Longworth Chuck
14" - 355mm - Longworth Chuck LSC14
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve.The Longworth style chuck makes it easy.This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds.Designed for clamping in a traditional 4 jaw-self-centering chuck using standard 50mm dovetail jaws.It eliminates the time and hassle of removing...
£139.95
Longworth Style Chuck - 16"
Longworth Style Chuck - 16" LSC16
Re-chucking bowls and patters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centering scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditiona 4 jaw-self-centering chuck using standard 50mm dovetail jaws. It eliminates the time and hasse of...
£159.95

Gripper Buttons with Hardware
Gripper Buttons with Hardware LSC5
Gripper buttons with hardware for Longworth style chucks
£21.95
Gripper Buttons without Hardware
Gripper Buttons without Hardware LSC6
Gripper Buttons For Longworth Chuck
£9.95

Eccentric Chuck
Eccentric Chuck ECCENTRIC
The Robert Sorby Eccentric Chuck is the most sophisticated chuck for multi-centre turning.Ease and accuracy of adjustment (without removing the workpiece from the chuck) is provided by the unique offset boss which accommodates the three different driving components on which to mount your workpiece, viz:- 1- Screwchuck 2 - Ball drive and socket 3 - Faceplate The full system is housed in a fitted, rigid...
from £231.95
Viper Chuck 2 3/4" Diameter
Viper Chuck 2 3/4" Diameter VIPER2
4 Jaw Scroll Chuck for wood lathes.Part of the new Viper range from Charnwood.A compact scroll chuck, with the jaws adjusted by a geared mechanism for simple one handed operation.Self centering, high precision design.Ideal for Mini and Midi sized lathes.The standard dovetail jaws can grip the workpiece both internally or externally depending on the style and shape of the piece to be turned.The chuck...
£99.00

5" - 127mm - Bowl Reversing Jaws For Viper 2
5" - 127mm - Bowl Reversing Jaws For Viper 2 V2FJ5
Bowl Reversing Jaws 5" Diameter for Viper2 Chuck.Bowl reversing jaws, also known as Cole jaws or Flat jaws are most commonly used for remounting finished bowls to re-shape the outside or to remove unwanted spigots, recesses or jaw marks.The jaws are 120mm diameter when closed, 144mm diameter when opened.The work piece is held in place by 8 rubber coated fixings which can be fitted in 3 different positions...
£25.00
Faceplate For Viper 2
Faceplate For Viper 2 V2FP
Face Plate Ring for Viper2 Chuck.The face plate ring has a 65mm outside diameter and has a dovetail shaped inside which can be gripped by using the standard Viper2 jaws.The face plate ring has 8 countersunk screw holes and is used instead of a threaded face plate so that you do not have to remove the chuck form the lathe to mount a bowl blank.The face plate ring can be used on any chuck capable of...
£8.00

Pin Jaws For Viper 2
Pin Jaws For Viper 2 V2PJ
Pin Jaws for Viper2 Chuck.Set of 4 optional jaws for Viper2 geared scroll chuck.Pin jaws allow smaller pieces to held than the standard jaws.The inside is smooth and parallel, the outside is serrated for maximum grip.The jaws project 29mm from the base plate.Expands from22mm to 46mmContracts from32mm to 8mm
£15.00
Viper 2 - Dovetail Jaws
Viper 2 - Dovetail Jaws V2DJ
Dovetail Jaws, serrated inside for Viper2 Chuck.Set of 4 optional jaws for our Viper2 scroll chuck. These jaws are deeper than the standard dovetails jaws supplied with new chucks. The inside is parallel and serrated for maximum grip, 25mm deep. The outside is dovetailed and projects 16mm from the base plate. Expands from 38mm to 62mm Contracts from 54mm to 30mm
£15.00

Wide Jaws For Viper 2
Wide Jaws For Viper 2 V2WJ
Wide Jaws for Viper2 Chuck.Set of 4 optional jaws for Viper2 geared scroll chuck.The Wide jaws have a serrated edge both internally and externally and can grip much larger pieces than the standard jaws.Projects 13mm from base plate.Expands from70mm to 94mmContracts from82mm to 58mm
£15.00
3" - 75mm - Vacuum Head 1 x 8 tpi
3" - 75mm - Vacuum Head 1 x 8 tpi V803-1
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50

3" - 75mm - Vacuum Head 1 1/4 x 8tpi
3" - 75mm - Vacuum Head 1 1/4 x 8tpi V803-125
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength. Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50
3" - 75mm - Vacuum Head 33 x 3.5
3" - 75mm - Vacuum Head 33 x 3.5 V803-33
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£56.50

6" - Vacuum Head
6" - Vacuum Head V806
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£63.95
8" - Vacuum Head
8" - Vacuum Head V808
Made of fibreglass reinforced nylon, the Holdfast Vacuum Chuck Head features a machined aluminium threaded collar for strength.Closed-cell foam o-rings guarantee a positive seal to hold the work firmly while providing a small amount of give that prevents the work from coming loose in the event of a minor tool catch.
£84.95
Page: | 1 | 2 | 3 |