3" - 75mm - Vacuum System 1 1/4" x 8tpi
3" - 75mm - Vacuum System 1 1/4" x 8tpi VS3H125
Vacuum chucking is a very popular method of mounting bowls on the lathe for light turning and finishing without marking the surface of the work.The Holdfast Vacuum Chuck System is a new generation of Vacuum Chuck that runs off of a standard shop air compressor (minimum 2.5 fm at 55-65psi) using the V810R Vacuum Generator.The Holdfast System offers simplicity, dependability, and performance at a fraction...
£255.00
3" - 75mm - Vacuum System 1" x 8tpi
3" - 75mm - Vacuum System 1" x 8tpi VS3H1
Vacuum chucking is a very popular method of mounting bowls on the lathe for light turning and finishing without marking the surface of the work.The Holdfast Vacuum Chuck System is a new generation of Vacuum Chuck that runs off of a standard shop air compressor (minimum 2.5 fm at 55-65psi) using the V810R Vacuum Generator.The Holdfast System offers simplicity, dependability, and performance at a fraction...
£255.00

6021 - NOVA Soft Grip Jaws
6021 - NOVA Soft Grip Jaws 6021
4 segments of soft nylon Cut and customize yourself to your specific holding requirements Markless holding Thick jaw body give maximum flexibility of design Uses standard fasteners supplied with your NOVA Chuck
£16.99
JS100N - NOVA 100mm Jaws
JS100N - NOVA 100mm Jaws JS100N
Designed for expanded dovetail and reverse dovetail for gripping footed bowls One of the most popular accessories for mounting 12-14? bowls Same jaw fixing system across all NOVA chuck models – total system interchangeability All NOVA chuck accessory jaws are designed to hold in the expansion and contraction modes 6-Year Warranty EXPANDING GRIP 96.8mm (3.81”) – 118mm (4.64”) CONTRACTING...
£44.99

JSPIN - NOVA Pin Jaws
JSPIN - NOVA Pin Jaws JSPIN
• Longer jaws allow for a very powerful spigot grip for smaller work such as lace bobbins • Acts like a pin chuck, expanding into a pre-bored hole. Perfect for free form edge bowls • These special 25mm extended jaws are designed to act like a pin chuck, expanding into a pre-bored hole. This is an especially useful holding method for bowls with a free form edge. • A big advantage over pin chucks...
£39.99
NOVA 35mm Bowl Jaws
NOVA 35mm Bowl Jaws 6019
Fits perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm Accessory Jaws. • Made from K1045 steel for maximum structural strength. • The standard Woodworm Screw (included with NOVA chucks) can be used with these jaws. EXPANDING GRIP 37.9mm (1.49”) – 59mm (2.32”) CONTRACTING GRIP Square: 29mm (1.14”) – 7.9mm (.31”) Spigot: 31mm (1.22“) –...
£29.99

NOVA Chuck Insert 1.1/8 x 12
NOVA Chuck Insert 1.1/8 x 12 IUNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99
NOVA Chuck Insert 5/8 plain bore - unthreaded
NOVA Chuck Insert 5/8 plain bore - unthreaded ISNS
NOVA uses an easy and inexpensive insert/adaptor system on all its NOVA insert chucks (apart from chucks that are directly threaded) The insert has different lathe spindle thread sizes internally and simply screws into the back of your NOVA chucks. Once the insert is in place, you can then put your chuck onto your lathe.
£19.99

NOVA Dovetail Chisel
NOVA Dovetail Chisel 6008
Accessory for NOVA Chucks to quickly and accurately make the dovetail recess for the chucking of a bowl. Ensures a dovetail with a sharp, clean edge to precisely match to the dovetail contour of NOVA Accessory Jaws. Creates maximum holding power to your NOVA Chuck. Scaled with a handy mark out scale for use as a guide.
£38.99
Patriot Chuck
Patriot Chuck RSPC
Like all Robert Sorby tools the Patriot is proudly manufactured in Britain. Fitted with smooth action 2" (50mm) jaws which have internal and external dovetail and gripper teeth to ensure work is held more securely. It also supplied with a screw chuck and an insert* which enable it to fit the vast majority of woodworking lathes.
from £199.00

Patriot Chuck - Dedicated 33 x 3.5
Patriot Chuck - Dedicated 33 x 3.5 RSPCN34
Like all Robert Sorby tools the Patriot is proudly manufactured in Britain. Fitted with smooth action 2" (50mm) jaws which have internal and external dovetail and gripper teeth to ensure work is held more securely. It also supplied with a screw chuck and an insert* which enable it to fit the vast majority of woodworking lathes.
£199.00
Patriot Chuck - Dedicated 1 1/2" x 6
Patriot Chuck - Dedicated 1 1/2" x 6 RSPCMH
Like all Robert Sorby tools the Patriot is proudly manufactured in Britain. Fitted with smooth action 2" (50mm) jaws which have internal and external dovetail and gripper teeth to ensure work is held more securely. It also supplied with a screw chuck and an insert* which enable it to fit the vast majority of woodworking lathes.
£199.00

Compatriot Chuck
Compatriot Chuck RSPCCOM
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50
Compatriot Chuck 1 1/2" x 6
Compatriot Chuck 1 1/2" x 6 RSPCCOMH
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50

Compatriot Chuck N34
Compatriot Chuck N34 RSPCCOMN34
The versatility of the Patriot chuck is demonstrated by its availability without jaws in three formats. Known as the Compatriot chuck these are the: RSPCOM, RSPCOMN34 and RSPCOMMH. Jaws from other chuck manufacturers fit this system but please contact Robert Sorby to be sure of appropriate fittings.
£146.50
Insert
Sale
Insert INSERT
This chuck insert system allows the Patriot chuck to be fitted to almost every lathe.
Was £24.00 Now £23.50

Exert
Sale
Exert NEX
To enable Patriot chucks with a standard thread to fit large spindle lathes.
Was £46.50 Now £44.25
Patriot Chuck - Zero Jaws
Sale
Patriot Chuck - Zero Jaws RSJZ
Zero Jaws will close down to 4mm minimum making them ideal for turning fine or delicate projects.They are a must for those specialising in miniature work.The dome shape is incorporated in the design to enable work very close to the project.It also allows internal holding of larger projects without the fear of marking the wood.
Was £62.00 Now £60.85

1" - 25mm - Patriot Jaws
Sale
1" - 25mm - Patriot Jaws RSJ1
With a fine internal and external dovetail, these jaws are perfect for fine intricate or miniature projects.
Was £39.00 Now £38.25
1" - 25mm - Patriot Pin Jaws
Sale
1" - 25mm - Patriot Pin Jaws RSJP
These Pin Jaws have a multitude of uses.Ideal for small projects utilising the fine internal and external dovetail.The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.
Was £52.00 Now £51.15

1 3/8" - 35mm - Patriot Jaws
Sale
1 3/8" - 35mm - Patriot Jaws RSJ15
Designed for smaller projects such as boxes and bowls up to 6" diameter.
Was £43.00 Now £41.95
2 3/4" - 70mm - Patriot Jaws
Sale
2 3/4" - 70mm - Patriot Jaws RSJ3
For bigger bowls and projects up to 13" diameter that need a little more substantial hold.
Was £57.00 Now £56.40

3 1/2" - 90mm - Patriot Jaws
Sale
3 1/2" - 90mm - Patriot Jaws RSJ4
These jaws allow for even bigger bowls up to 16" diameter to be held securely.
Was £60.00 Now £58.75
Patriot Long Nose Jaws
Sale
Patriot Long Nose Jaws RSJLN
Rough turned bowls can be remounted internally with the reach of almost 4" of these jaws.Extra access to the back of a turned piece is acquired due to the tapered shape and the dovetail being 2" away from the chuck body.
Was £74.00 Now £72.75
Page: 1 | 2 | 3 |