Spindle Extender 1" x 8tpi
Spindle Extender 1" x 8tpi A861
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock 1" x 8tpi
£44.95
Spindle Extender 1.125 x 8tpi
Spindle Extender 1.125 x 8tpi A862
Extenders allow deep bowls to be turned without hitting the lathe. A hole through the center allows vacuum to go through center of extenders. Can be used on standard non-vacuum chuck heads. Flats on extenders allow easy removal with wrench if necessary.Each extender includes two No Lock 1 1/4" x 8tpi
£44.95

Stabilizing Resin & CatalystStabilizing Resin & Catalyst
Stabilizing Resin & Catalyst STABRESIN
To be used with the Stabilising System, this resin has a low viscosity which assists greater wood penetration.A low cure working temperature of 200F allows the cure to be in a small toaster type oven.It can be coloured with dye that will add dramatic effects.Uncatalyzed it has a 3 year shelf life, after adding catalyst the shelf life is 3 months.The tanks can be cleaned with soap and water.
from £36.95
Standard - Rotating Centre
Standard - Rotating Centre SRCMT
Standard Duty Rotating Centre. 31mm dia. head with 60 deg. point. Excellent general purpose centre. Twin deep groove ball races.
£29.95

Steb DriveSteb Drive
Steb Drive STBCHUCK
The Steb Drive uses the same innovatively designed head as the original Stebcentre.The Steb Drive is designed to fit into the jaws of the majority of 4 jaw woodturning chucks available.It has a positive and secure location utilising the flats of the spigot.
from £47.45
StebcentreStebcentre
Stebcentre STBCENTRE
The original Stebcentre is a lathe drive centre with several unique features.It uses razor sharp serrated teeth to grip the work piece, without the need for pre-marking the wood with the drive prior to putting it onto the lathe.The greatest benefit the Stebcentre has over any other driver available on the market is the spring loaded centre point.Pressure can be applied so the wood can be driven with...
from £47.45

Stickfast Dyes Mixed - Pack of 5
Stickfast Dyes Mixed - Pack of 5 351-5
Stickfast dyes are formulated to work with the Resin.This mixed pack contains a 1oz jar of Black, Blue, Red, Violet and Yellow Dye.
£38.50
SuperNOVA2 Chuck Companion (insert req)SuperNOVA2 Chuck Companion (insert req)
SuperNOVA2 Chuck Companion (insert req) 23067
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. It has unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides and Comfortable T Bar Handle. Powerful patented Tuff Lock™ gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration...
£99.99

SuperNOVA2 Chuck Companion (M33 x 3.5)
SuperNOVA2 Chuck Companion (M33 x 3.5) 23073
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. It has unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides and Comfortable T Bar Handle. Powerful patented Tuff Lock™ gearing with precise, hardened action. Delivers incredibly smooth strength for a solid, vibration...
£99.99
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (insert req)
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (insert req) 23250
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2" Jaws come standard. Powerful patented Tuff Lock™ gearing with precise, hardened action. Delivers incredibly smooth...
£159.99

SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (M33 x 3.5mm direct thread)
SuperNOVA2 Chuck w/Pin Jaws & Universal Spanner (M33 x 3.5mm direct thread) 23253
Powerful and fast Tuff Lock™ geared action Unique tilt away T Bar handle for easy and convenient access Composite indexing backing plate reinforced with stranded glass fibres for extra strength Fits full range of NOVA Chuck Accessories Special NOVA Wood turning profile on Jaws to cut into and grip wood fibres firmly Precision machined from solid steel 4-Jaws Lock down solidly Includes:...
£149.99
SuperNOVA2 Chuck w/Pin Jaws (1.1/4" x 8tpi direct thread)
SuperNOVA2 Chuck w/Pin Jaws (1.1/4" x 8tpi direct thread) 23251
Suitable for a wide variety of lathes with up to 20" swing. The SuperNOVA2 Chuck is fully featured and one of the most popular on the market today. Unique features such as Composite Indexing Back, Auto Stop, Copper composite Jaw Slides, Woodworm Screw, Comfortable T Bar Handle and 2" Jaws come standard. Powerful patented Tuff Lock™ gearing with precise, hardened action. Delivers incredibly smooth...
£149.99

Support Arm
Support Arm US-105
An extra Universal tool support for your T-5 can be a very useful addition, allowing quick interchange between the horizontal and vertical mounting positions, especially if it is preferable to save a particular set up.The US-105 features a micro adjuster making for smoother and easier operation and offering an accurate method to find and replicate an edge angle.This is an excellent upgrade for an older...
£41.95
T8 Tormek Sharpening Machine
T8 Tormek Sharpening Machine T8
The Tormek T-8 sharpening system is the perfect answer to your sharpening requirements. For any professional or amateur needing a versatile, reliable and repeatable sharpening system, the T-8 should be on the top of your list. The T-8 has a 250mm x 50mm water-cooled grindstone and a 220mm x 31mm leather tyred honing wheel. Powered by a quiet 200W motor, Tormek’s unique and efficient drive system...
£571.88

Threaded Rod
Threaded Rod V844
Spare threaded rod
£3.95
Tip Holder
Tip Holder 472
A handy little accessory which will accept most Robert Sorby cutters.It avoids skinning fingers when sharpening.Tip not included.
£8.95

Titan 1.1/4" X 8TPI - Titan III Chuck w/Power Jaws (direct thread)
Titan 1.1/4" X 8TPI - Titan III Chuck w/Power Jaws (direct thread) 13060
The largest chuck in the NOVA chuck range. Ideal for those large lathes with 20"/508mm diameter swing and larger. Super Aggressive Holding Power. The Nova Titan Chuck is a large solid chuck designed for use on large lathes and for larger projects. This solid 5” diameter chuck with it’s larger jaw capacity is capable of handling much larger projects than the SuperNova 2 Chuck. The Titan can also...
£249.99
Titan III 5.75" Deep Grip JawTitan III 5.75" Deep Grip Jaw
Titan III 5.75" Deep Grip Jaw 13040
Titan III jaw Deep Grip Jaw Set 3 Screw Hole Mount ONLY designed to fit Nova Titan III chuck Huge 5-3/4" Jaw designed for turning very large work A great compliment to the 5? Powergrip jaws that come with the Titan III chuck
£49.99

Titan III 6.5" Deep Grip Jaw
Titan III 6.5" Deep Grip Jaw 13041
3 Screw Hole Mount ONLY designed to fit Nova Titan III chuck Huge 6-1/2" jaw designed for turning very large work A great compliment to the 5" Powergrip jaws that come with the Titan III chuck
£54.99
Titan M33 x 3.5 - Titan III Chuck w/Power Jaws (direct thread)
Titan M33 x 3.5 - Titan III Chuck w/Power Jaws (direct thread) 13061
The largest chuck in the NOVA chuck range. Ideal for those large lathes with 20"/508mm diameter swing and larger. Super Aggressive Holding Power. The Nova Titan Chuck is a large solid chuck designed for use on large lathes and for larger projects. This solid 5” diameter chuck with it’s larger jaw capacity is capable of handling much larger projects than the SuperNova 2 Chuck. The Titan can also...
£249.99

Tool Rest - DML305 - 4"
Tool Rest - DML305 - 4" DML305-B
4" Tool Rest For DML305 & Early CL3/4 (3/4" stem)
£14.99
Tool Rest - DML305 - 6"
Tool Rest - DML305 - 6" DML305-C
6" Tool Rest For DML305 & Early CL3/4 (3/4" stem)
£16.99

Tool Rest StemTool Rest Stem
Tool Rest Stem 765-S
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9"as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available...
£10.00
Tormek - 250mm Grinding Wheel
Tormek - 250mm Grinding Wheel SG-250
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life.This stone efficiently cuts all types of tools and steel qualities including HSS.250mm diameter wheel, 220 grit.
£123.00
Page: First | | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |