3 Piece Knife Starter Set
3 Piece Knife Starter Set KN500
A great little 3 piece detail carving knife set from Flexcut. As with all their edge tools, they are extremely comfortable to handle and will hold a razor sharp edge. The set containsKN20 - Mini Chip KnifeKN27 - Mini Detail KnifeKN19 - Mini Pelican Knife A block of Flexcut Gold sharpening compound
£63.65
Detail Knife Set
Detail Knife Set KN400
Flexcut have put together the perfect package to get you started in carving with knives. These knives are made with the same edge-holding properties as their gouges and chisels and come honed and ready for use. The comfortable curved ergonomic handle allows for long periods of carving without hand fatigue. Set includes: KN12 - Cutting Knife KN13 - Detail Knife KN14 - Roughing Knife a...
£93.95

Beginner Palm and Knife Set
Beginner Palm and Knife Set KN600
The Flexcut beginner palm and knife set is a great way to get started in this rewarding craft. It includes the most popular palm tools and knives from the Flexcut range. Each tool is supplied razor sharp and ready to use. Set includes KN12 Cutting Knife, KN13 Detail Knife, FR307 V Tool and FR306 Gouge.
£86.50
3 Piece Chip Carving Set
3 Piece Chip Carving Set KN115
Create the intricate geometric or freestyle patterns that are the hallmark of the craft of chip carving with this dedicated set. Set includes chip carving knife, mini-chip knife and a skew knife.
£69.15

Deluxe Woodcarving Starter Set
Sale
Deluxe Woodcarving Starter Set SK108
A complete carving set all in one box. Suitable for mallet, palm or knife carving. Includes a sharpening SlipStrop and compound for honing your tools to a razor edge.
Was £215.95 Now £212.92
Woodcarving Starter Set
Woodcarving Starter Set SK108B
All you need to start out in the fascinating hobby of woodcarving, 10 Flexcut items in a wooden box at a substantial cost saving. Adaptor available for using these tools in a Bosch or Skill power carver. Includes 3 x 1/4" (6mm) and 7/8" (22mm) gouges and 3/8" (9mm) V tool. Palm handle for detail work, power handle for harder work, carving knife sharp and ready to carve, slipstrop...
£112.50

Woodcarvers SetWoodcarvers Set
Woodcarvers Set SK10
Set interchangeable carving tools with a standard interchangeable handle in a handy safety pouch.
from £65.00
Beginner Craft Carver Set
Beginner Craft Carver Set SK111
Carving tutor Peter Berry designed and developed this package for Flexcut and thoroughly recommends the kit as an ideal introduction to the fascinating craft of woodcarving. It's supplied with two interchangeable carving blades together with an ABS handle so that as you gain experience, additions could easily be made from the extensive range of Flexcut SK blades. A bassword blank for leaf...
£36.40

Skew Knife
Skew Knife KN11
Carving Knives with long lasting Flexcut razor edge. The comfortable carved handle allows for long periods of carving without hand fatigue.
£21.65
Cutting Knife
Cutting Knife KN12
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN12 Cutting Knife is a general purpose carving knife. Its more rounded point is very durable. A great beginners knife, 28mm blade length. The comfortable carved handle allows for long periods of carving without fatigue.
£23.95

Detail Knife
Detail Knife KN13
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The KN13 Detail Knife has a very fine point for making the very narrow cuts associated with detailing. Its straight 38mm blade can accommodate larger stock removal if needed. The comfortable carved handle allows for long periods of carving without fatigue.
£23.95
Roughing Knife
Roughing Knife KN14
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. It features a straight 2' blade for heavier stock removal, with a rounded durable point.
£25.50

Chip Carving Knife
Chip Carving Knife KN15
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. This traditional chip carving knife is honed, polished and ready to carve. The comfortable carved handle allows for long periods of carving without fatigue.
£23.20
Scorp Set
Scorp Set KN150
Scorps Set includes: KN12 - Cutting Knife KN13 - Detail Knife KN18 - Pelican Knife KN19 - Mini Pelican Knife Presented in a handy tool roll with a specially shaped strap. Choose a right-handed tool to cut towards you and a left-handed tool to cut away from you.
£106.80

Mini-Pelican Knife
Mini-Pelican Knife KN19
KN19 Mini Pelican Knife. The mini-pelican knives offer the same features as their larger brother (KN18) only with a 22mm ultra thin blade for the lowest resistance when fine cutting is required. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions
£26.65
Mini Chip Carving Knife
Mini Chip Carving Knife KN20
KN20 Mini Chip Knife. The mini-chip carving knife has a 16mm ultra thin blade, making unwanted chipping in delicate cuts less likely. The smaller handle is faceted with multiple control points to allow them to be held in a variety of comfortable positions.
£21.90

8mm Right-Handed Scorp
8mm Right-Handed Scorp KN23
KN23 5/16" (8mm) Right-Handed Scorp Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself.
£25.25
3" Draw Knife
3" Draw Knife KN25
This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. It fits nicely into your tool box. A leather sheath is included to help protect your cutting edge.
£43.75

Mini Detail Knife
Mini Detail Knife KN27
The Mini Detail Knife has the smallest 19mm straight blade. It is made from ultra-thin material so as not to disturb adjacent wood for very delicate cuts.
£27.65
Flexcut Knife Strop
Flexcut Knife Strop PW14
Although Flexcut call this a knife strop, it can also be used for other edge tools just as effectively.If a blade has already been honed, it will benefit from stropping to polish the steel further and give an extra┬║ of sharpness.Regular stropping of a blade means less honing which saves time and effort.Supplied with a block of Flexcut Gold Polishing Compound for a razor edge.
£17.75

5" Draw Knife
5" Draw Knife KN16
This Draw Knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The tool can be flexed to accommodate concave or convex surfaces. Cuts can be made that conform more closely to the finished shape, taking less time to sand or scrape. A leather sheath is included to help protect your cutting edge.
£45.60
5mm Right-Handed Scorp
5mm Right-Handed Scorp KN22
KN22 3/16" (5mm) Right-Handed Scorp Scorps are essentially right-angled gouges designed for carving areas where the full length of a gouge will not fit. Knife carvers will find them useful for hollowing deep, narrow cavities. Right and left-handed models are available. Right-Handed carvers should choose a right-handed tool to cut towards yourself.
£25.25

Flexcut Gold Polishing Compound
Flexcut Gold Polishing Compound PW11
Designed for quickly maintaining a sharp edge, Flexcut Gold Polishing Compound has been specially formulated to apply like a crayon. Its blend of aluminium and titanium oxide provide a balance between aggressive removal of hardened tool steel and offering a high-colour polish.
£11.75
Pelican Knife
Pelican Knife KN18
These knives are made with the same edge-holding steel as the Flexcut gouges and chisels. The comfortable carved handle allows for long periods of carving without fatigue. The curved 1.5/8' blade offers a clean slicing action similar to a skew. The point is narrowed for a tight turning radius while still being durable. Cuts very well in hollow areas.
£26.95

Flexcut Slip Strop
Flexcut Slip Strop PW12
The Flexcut SlipStrop is an economical way for maintaining the tools razor edge.It has been specially moulded to allow for polishing and deburring the hard to reach areas on the inside of V-tools and gouges as well as the outside edge bevel.Either side of the strop can be used.Each SlipStrop includes a mini-bar of Flexcut Gold polishing compound and detailed instructions
£19.95
Pocket JackPocket Jack
Pocket Jack JKN89
The Pocket Jack for Carvin' is the streamlined version of our Carvin' Jack with the same high-quality. It weighs 3 ounces and has a closed length of 4-1/4". Blades included: Detail Knife, Straight Gouge, Gouge Scorp, and V-Scorp.
£99.96