Round Scraper Tip
Round Scraper Tip TRS230C
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Hollowmaster the tool it was designed for and for delivering those...
£19.26
Excelsior Round Scraper Tip
Excelsior Round Scraper Tip TRS230GC
The Robert Sorby Full Round Cutter is the perfect circular cutter for all general and large purpose hollow form turning. An incredible all rounder this cutter, like all full round cutters, provides the opportunity to rotate a couple of times to provide a clean sharp edge before it requires sharpening. The perfect accompaniment for the Hollowmaster the tool it was designed for and for delivering those...
£23.34

Shallow Hollowing 14"
Shallow Hollowing 14" B850001
850H Shallow Hollowing 14" Tool End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. The smallest (850H) is designed to work through the narrowest of apertures, down to as small as 3/8" (10mm).
£52.02
Medium Hollowing Tool
Medium Hollowing Tool 851H
More exaggerated swan neck and thicker shaft that the 850H.Has a replaceable tip (ref 851C).Min aperture: 1/2'Max depth: 5'
£52.02

Swan Neck Hollowing Tool 20"
Swan Neck Hollowing Tool 20" B855003
855H Swan Neck Hollowing Tool A very versatile, general purpose hollower. Ideal for under-cutting. Fitted with a replaceable HSS tip (851C). Min aperture: 1/2" Max depth: 6"
£57.12
Swan Neck Hollowing Tool 24"
Swan Neck Hollowing Tool 24" B859004
Swan Neck Hollowing Tool 24" 859H The individual shape of these tools makes them suitable for blind turning or under cutting here reach is restricted. The 14" version (851H) is designed for end grain use on shallower depth projects whilst the slightly larger model (855H) allows for greater reach. The 24" version (859H) is produced from a more substantial section steel, and is more...
£77.52

Micro Straight Tool HSS
Micro Straight Tool HSS B87606W
This narrow ornamental tool is ideal for creating apertures in miniature vases or for straight hollowing. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
£31.26
Micro Cranked Tool 3/16"
Micro Cranked Tool 3/16" B87706W
The cranked tool is ideal for taking the undercuts required in miniature hollowing work. Use in combination with the Hook tool to create some unbelievably small hollow forms. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
£35.28

Micro Hook Tool 3/16"
Micro Hook Tool 3/16" B87806W
This narrow ornamental tool is ideal for creating apertures in miniature vases or for straight hollowing. Available individually or in the ornamental hollowing set (A38HS3T) originally designed for crafting Christmas decorations.
£35.28
Three Piece Micro Hollow/Ornamental Set
Three Piece Micro Hollow/Ornamental Set A38HS3T
This set of micro turning tools has been specifically designed for miniature hollowing. 
£103.08

Hollowing Tool 3/16"Hollowing Tool 3/16"
Hollowing Tool 3/16" 873
Ideal for miniature projects, Christmas ornaments.Sharpen with a diamond hone.Min aperture: 1/4'Max depth: 1.1/2'
from £27.36
Modular Micro Boring
Modular Micro Boring 888-6
As the name suggests this tools is designed for boring out apertures and for straight hollowing on small projects.
£19.98

Modular Micro Swan Neck
Modular Micro Swan Neck 888-7
A great tool for developing the undercut and taking the hollowing shape to the next level. Excellent for developing small hollow forms such as small vases and egg cups.
£19.98
Three Piece Modular Micro Hollowing Set
Three Piece Modular Micro Hollowing Set A87HS3T
This modular hollowing set is a great starter set for those wanting to experiment with hollowing forms in miniature.
£76.68

Main Handle - Sorby System
Main Handle - Sorby System TRS202
This pistol shaped support is one of two handles available to support Robert Sorby?s deep vessel hollowing tools. These include the Hooker (RS210), The Slicer (RS205), The Chattertool Shank (RS215) and the Articulated Probe (RS213C). The Arm Brace (RS206) is the other handle for these tools and provides additional support along the woodturner?s forearm.
£69.18
Reversible Hooker
Reversible Hooker TRS210
The Hooker is designed as a safe method of hollowing vessels through narrow openings. It comes fitted with a scraper cutter (RS222) for finishing but also takes the swivel assembly and hollowing tips (RS211C and RS212C). Its design allows for both inboard and outboard turning. It should be fitted to the Main Handle (RS202) and Side Handle (RS203) or alternatively the Arm Brace (RS206).
£77.34

Swivel Tip Complete - Rs2000
Swivel Tip Complete - Rs2000 TRS211
This set comprises the swivel clamp that holds the tip firmly in place. Includes a Round End Swivel Tip. This cutter curved cutting edge is the perfect tool for providing a gentle sweeping curve for example on the bottom of vases.
£41.64
Domed Cutter for RS215KT
Domed Cutter for RS215KT TRS221
One of two double ended chattertool cutters that will produce a myriad of decorative patterns. Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre. To be produced on end grain only. Sharpening: Use a diamond file or honing stone flat across the top face....
£8.94

Diamond Sharpening File
Diamond Sharpening File RS224
Ideal handy accessory for sharpening replaceable tool tips.Can also be used on knives, scissors, even tungsten carbide router bits.For maximum life lubricate with water during use.
£18.36
Swivel Tip ProbesSwivel Tip Probes
Swivel Tip Probes B8801003
For increased access in restricted openings (tall vases and deep vessels) these probes are ideal.They work on both end and bowl grain.The largest of the three (8803H) comes with an articulated head which gives easier access to those difficult to reach areas.In its unhandled form (RS213) this fits neatly into the arm brace of the RS2000 system.Project dimensions:20'Probe Min Aperture: 1/2'Max Depth:...
from £54.36

Jaw & Collet ToolJaw & Collet Tool
Jaw & Collet Tool 817
Designed to cut the perfect dovetail required on a tenon or in a recess when mounting a timber blank on the jaw or collets of a woodturning chuck.
from £46.62
Relief Cutting Tool
Relief Cutting Tool 895H
The Relief Cutting Tool enables the turner to produce a recess prior to threading.
£41.04

Crush Grind Tool with One NotchCrush Grind Tool with One Notch
Crush Grind Tool with One Notch B895CG1
Robert Sorby Crush Grind Tool For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly. The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand side allows the...
£45.66
Ring Tool HSS
Ring Tool HSS B845133
Robert Sorby Ring Tool 1/2" - 13mm. High Speed Steel, available handled or unhandled. Designed specifically for end grain hollowing. The dual bevels allow for hollowing of internal curved surfaces and flat bottomed vessels. This tool produces an unrivalled surface finish on end grain. Ideal for goblets and egg cups. Comes complete with full instructions.
from £51.78

Thread CuttersThread Cutters
Thread Cutters 890
If you have been making lidded boxes for a while the next step is to started producing threaded lids. This is not a project for the novice or the faint hearted. Producing threads needs a lot of practice and a steady hand but once mastered this technique adds significant value to your project. These Robert Sorby thread cutters were designed in conjunction with master turner Robert Sorby and have...
from £58.50
Texturing ToolTexturing Tool
Texturing Tool 310
This is a novel tool which will enhance the visual and tactile qualities of even the most bland piece of wood.By rubbing the cutter across the turned project an interesting textured effect can be created.The texture pattern can altered by changing the angle of the cutter, the speed of the lathe, the position of the tool rest and the type of wood.The range of textures can vary from an orange peel effect...
from £84.18

Spiralling ToolSpiralling Tool
Spiralling Tool 320-330
Creating barley twists, spirals and flutes has always represented a problem for the woodturner. The Spiralling System (330H) not only overcomes many of these difficulties, but also allows the turner's imagination to run wild as he enters a new field of decoration. Based on the same principle as the texturing tool, it is simple to use even in the hands of a novice - but still comes with instructions...
from £123.72
Toolrest
Toolrest 360
The tool rest enables those who already possess a Texturing Tool to convert it to a Spiralling System.
£39.72

Texturing Cutter
Texturing Cutter 350-0
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects. One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results. Sharpening:...
£48.42
Spiralling CutterSpiralling Cutter
Spiralling Cutter 350
The Robert Sorby Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 2mm on bowl and spindle projects. One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results. Sharpening:...
£48.42

Modular Micro Spiralling Tool (Unhandled)
Modular Micro Spiralling Tool (Unhandled) 370/0
The unhandled micro spiralling tool comes complete with two spiralling cutters and is used in exactly the same way as the conventional Spiralling System (B320, B320S). This tool is also available with a handle (B370/A). A further texturing cutter is available as an optional extra.
£70.98
Micro Texturing CutterMicro Texturing Cutter
Micro Texturing Cutter 370
The Robert Sorby Fine Micro Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of small spiral patterns and textures on a range of projects including bowls, vases and boxes. One of three cutters for the Modular Micro Spiralling Tool. Experiment using the various pitch depths these cutters provide. With a bit of practice you'll be amazed at the results. Sharpening:...
£16.32

Chattertool Kit
Chattertool Kit RS215KT
The Chattertool creates random decorative patterns on end grain only.That makes it ideal for box lids and jewellery.Each pattern created is unique as it is determined by the shape of the cutter, the speed of the lathe, the length of protrusion of the blade, and the type of wood.Because of the random nature of these decorations they are unrepeatable unless exactly the same conditions exist.The Chattertool...
£90.90
Tool Support
Tool Support 893H
Extra control is given by the tool support when threading internally.
£41.04

Sandmaster
Sandmaster W410
The Sandmaster is an essential part of every turner's tool kit. It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time. It avoids an uneven finish often associated with hand sanding and there is no danger of catching hands on the revolving project. There is little to no surface damage/head build-up, as there is with power sanding...
£67.86
Goblet & Bowl MopsGoblet & Bowl Mops
Goblet & Bowl Mops MOP
Produced from a fine grade of cotton these deluxe mops have been made to deliver the ultimate finish.They are used after sanding to buff oil, lacquer and wax finishes to a lustrous sheen.Mops are fixed to the Sandmaster using the pigtail mandrel.
from £28.14

Aluminium Oxide Discs 50mm
Aluminium Oxide Discs 50mm 412
Velcro Sanding Discs (10 pack)
from £5.82
Aluminium Oxide Discs 75mm
Aluminium Oxide Discs 75mm 413
Velcro Sanding Discs (10 pack)
from £9.12

Micro Sandmaster Unhandled
Micro Sandmaster Unhandled 888-0
The perfect tool to help finish projects before applying finishing oils or paints. Like its full size equivalent the Micro Sandmaster has an adjustable head to reach into tight corners. It comes with a Velcro covered sponge pad onto which four different abrasive grits may be attached.
£45.66
Aluminium Oxide Discs 25mm
Aluminium Oxide Discs 25mm W411A120
Abrasive Discs (Pack of 10)
£3.00

Sizing Tool
Sizing Tool 970
In order to obtain accurate and consistent diameters up to 3' the Sizing Tool is a useful accessory.It takes the parting tool, 3/16' diamond parting tool and the beading & parting tool.
£40.44
Vessel CaliperVessel Caliper
Vessel Caliper H9710000
These vessel callipers are designed for internal and thin-wall dimensioning. The straight arm is especially useful for accessing narrow vessels. Sizes can be read at either end. Available in 2 1/2', 5' and 10' models.
from £21.66

Double Ended CalipersDouble Ended Calipers
Double Ended Calipers 974
These are an indispensable addition to the turner's armoury for measuring both wall thickness and diameters. Because of their design the measurement taken at one end automatically transfers to the opposite end. This enables the turners to take an accurate measurement reading without the need to remove the callipers. Available in 4' and 7' models. The 7' version has an increased depth of throat at one...
from £24.36
Internal/External Caliper 8.1/2"
Internal/External Caliper 8.1/2" 9785
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture. As with double ended callipers the measurement at one end automatically transfers to the opposite. Available in 6" and 8 1/2" models.
£40.50

Inside/Outside Calipers 6"
Inside/Outside Calipers 6" 976
The design of these callipers allows not only the measurement of wall thickness but also inside dimensions like the size of an aperture. As with double ended callipers the measurement at one end automatically transfers to the opposite. Available in 6" and 8 1/2" models.
£29.34
Depth Stop for Boring Tool
Depth Stop for Boring Tool 853
End grain hollowing tools designed for hollowing small and miniature work, using branchwood or end grain timber. The boring bar and depth stop (852H and 853) form an ideal method of quickly opening up a vessel to provide both entry opening and final hollowing depth. Photo shows 853 fitted onto a tool.
£18.50

Thread & Sizing Gauge
Thread & Sizing Gauge 973
Thread and sizing gauge taking the guesswork out of dimensioning.
£49.86
Ultima Finishing Cutter HeadUltima Finishing Cutter Head
Ultima Finishing Cutter Head ULTFCH
An optional finishing cutter head which has a shear scraper cutter can be fitted allowing the turner to achieve a smooth surface finish.This cutter head can also be used with a variety of cutters already available from Robert Sorby.
£35.04
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |