|
|
|
 | Deep Hollowing System
The RS2000 System is derived from the original Stewart System which was one of the first tools devised for hollowing out deep vessels. One of its advantages is that it is modular in construction which means that it can be adapted to meet specific applications.
It comes complete with both a Slicer for the coning of bowls to save waste wood and a Hooker for hollowing under the rims of vessels. The Arm Brace is an optional extra.
The RS2000 System comes in two variations - one complete (RS2000), and the other complete except for the chattertool element (RS2001). Complete with full instructional manual.
All components are available separately.
|
|
 | Detail Point Tool
The Detail Point Tool is a 3/8" round shaft with a 3 facet point. It is ideal for fine detailing on bowl and spindle work. |
|
 | Dimensioning Tools
A collection of tools designed for the woodturner to measure wall thickness, internal and external dimensions. |
|
|
 | Hollowing - End Grain
These are designed for the more delicate hollowing of end grain projects like vases and weed pots. Their swan-neck shape makes them ideal for blind turning or under-cutting.
The tools are differentiated by the scale of project to be undertaken.
All except the 14" long version (850H) have replaceable HSS tips.
|
|
 | Hollowing - Straight
These three tools can be used on both side and end-grain. They are ideal for longer projects like deep vases. All three come with replaceable HSS tips which are easily sharpened with a diamond hone. |
|
 | Interchangable Cutter System
This system uses a specially machined cutter seat in a uniquely designed flat shaft. The cutter seat has been machined so that when the cutter is in position, it is slightly angled down to the front and into the direction of the cut. It is machined in this way on both sides so that the cutter is in the correct position when cutting from either direction while keeping the shaft flat on the tool rest. The tool is available in two options; there is the standard and long version. There are many different shaped cutters available for various applications, specifically designed to fit into the cutter seat. |
|
 | Lamp and Long Hole Auger
For long hole boring standard lamps and table lamps. 950 Lamp Standard Shell Augers 30" overall length - supplied handled.
5/16" and 3/8". For long hole boring. |
|
 | Modular Micro Turning Tools
Robert Sorby continues to lead the way with woodworking tool innovation with the introduction of the all new Micro tool system.The system is centred on the beautifully engineered burgundy anodised aluminium handle. Into this handle can be fitted an array of tools.
There are 4 separate tools available:
Micro Sandmaster
Micro Spindle Set
Micro Spiralling Tool
Micro Hollowing Set
The main benefit of this system is that the woodturner can buy just one of the above sets which include the modular handle and then add any of the other sets to complement their collection
|
|
 | Micro Turning Tools
Ideal for those working in 1/12" scale or miniature projects, the micro HSS turning tools gave fine control for detail work. Their size - overall length is 10" - means that even when working on a mini lathe there is no fouling the bed bars.
These tools are great for pens, dolls house furniture, Christmas ornaments, lace bobbins, finials on small box lids, jewellery, and other small projects.
The Multi Scraper is one of the handiest tools in any turner's kit.
Available as individual tools or sets.
|
|
 | Midi Turning Tools
This collection of HSS turning tools is ideal for those who have a midi or mini lathe or who work in restricted areas. These are scaled down versions of regular tools. Overall length is 14". |
|
 | Parting Tools
Parting tools are primarily used for parting off projects. The thinner section tools are particular beneficial when using the more exotic woods. However, parting tools may also be used to provide thin banded decorations on turnings.
Fluted parting tools are specially shaped to give an extra clean finish.
Available with and without handle except for the Slim Parting Tool..
The shape of the Diamond Parting Tools prevents both binding in the cut and heat build-up which may lead to burning of the project..
Fluted parting tools are specially shaped to give an extra clean finish.
The Beading and Parting Tool is extremely versatile. Its finesse allows for the production of beads whilst it can also be used for conventional parting off. Its more massive section makes it much more rigid and hence it is ideal for making spigots.
Made from the same section as the Beading and Parting Tool, the Bedan, which is a popular tool in France, has a relieved side clearance. This allows it to be used for both beading and parting as well as plunge cuts in bowls and boxes.
In order to obtain accurate and consistent diameters up to 3" the Sizing Tool is a useful accessory. It takes the ¼" parting tool, 3/16" diamond parting tool and the beading & parting tool
|
|
 | Roughing Gouges
A roughing gouge is a fundamental part of any spindle turners tool kit. The roughing gouge is designed specifically to turn square wood into round between centres. On no account should it ever be used for roughing out bowls. It was never designed for that task and will not withstand the rigours of bowl turning. The 3/4" version is the more popular size.
Available with or without handle.
|
|
 | Sandmaster
Allows sanding and polishing of work piece whilst still on the lathe
Multi-position 2" velcro pad
Also takes optional 3" velcro pad
Complete with 2 discs of each of 5 grits: 60, 120, 180, 240 & 400
Also accepts goblet and bowl mops to apply different types of finish
Watch a Video Clip:
Introduction (27mb)
Using the Sandmaster (47mb) |
|
 | Sovereign System
Sovereign is a new handle system for woodturners. Like all other Robert Sorby products it is made in Sheffield to the most exacting engineering standards. Sovereign is the name of the interchangeable handle and is available in two lengths - 16" and 22".
The handles are made of aluminium and alloy in combination to give the best of strength, balance and vibration dampening qualities. Each handle comes with a durable Softex grip for extra comfort. Additional knurling provides a further non-slip surface. Both handles will take turning chisels with a 5/8" diameter shaft. Also included are 3/8" and 1/2" collets to accept tools with those diameters thereby allowing the turner to use his Sovereign for a whole host of different chisels (Note: American-made tools are measured by bar diameter whilst European brands are measured by flute size. Hence the 3/8" collet is designed for a European 1/4" gouge, and the 1/4" collet for a 3/8" gouge whilst the 1/2" gouge will fit directly into the handle ).The Sovereign handles and collet system are ideal for quick change from one tool to another. At the same time they enable the turner to lengthen or shorten the tool length.
|
|
 | Scrapers
Scrapers are an essential part of any turner's took kit. They are designed to give to a very fine finish primarily on bowl or face-plate work. Unlike other turning tools they are held in the perpendicular on the tool rest. When used correctly they will virtually eliminate the need for sanding. |
|
 | Skew Chisels
The skew chisel is the equivalent of the plane to the spindle turner as it is used to obtain an even and clean finish on between-centres projects. It should not be used on bowl projects.
There are two shapes of skew chisel. The oval skew glides effortlessly along the tool rest and its shape gives much more manoeuvrability. On the other hand the standard skew is rectangular in section. Its heavier weight makes it ideal for larger projects like newel posts and chair legs.
|
|
 | Spindle Gouges
Spindle gouges are used for producing shapes - beads and coves - on spindle work. These are delicate tools designed for creating fine detail. These are not rugged enough to be used on face-plate work.
Available with or without handle. |
|
 | Spindlemaster
The Spindlemaster is unique to Robert Sorby. It is an exceptionally user-friendly variant of the skew chisel, but acts like a gouge. Unlike the skew chisel, it has not corners which might cause those infamous 'dig-ins'. Instead it is high versatile - it coves, it beads, it planes and it trims end grain. At the same time it is easy to sharpen. Just run a diamond hone across the top face - nothing could be easier.
Available handled and unhandled in full size and micro size.
Watch a Video Clip:
Introduction & Use (24mb)
Using the Spindlemaster (45mb)
|
|
 | Spiralling & Texturing
The Spiralling System is a tool unique to Robert Sorby. It is designed to provide decorative spirals on turned work - round the rims of bowls, round, the stems of goblets and candle-sticks. It will not cut threads.
Spirals can be cut at different angles, left or right and in different sizes. Such is the variety. It is possible to cut one spiral over another to produce cross hatches, diamonds and rope effects. Even now turners are still experimenting with this tool in conjunction with colours, inlays and hollow forms. It really challenges the imagination. The indexed reference points on the tool rest enable repeatability of spirals.
There are two options. The complete system comes with four cutters - three for spiralling and one for texturing. The basic tool comes with just cutter but is an ideal introduction to this decorative technique. Spare and additional cutters are available.
Both come with instructions on use.
The Spiralling System is not intended for use on soft woods.
Use a diamond sharpening file (RS224) to keep the tool in tip-top condition
Further information on use of this and other decorative tools is available on the Decorative Tools video (VRS03A)
Watch a Video Clip:
Introduction & Sharpening (44mb)
Setup and Use (64mb) |
|
 | Starter Sets
When first beginning turning, the novice is faced with a vast array of choices. One of those choices is to cut corners by buying an inexpensive set. That could be your worst decision as cheap tools perform inadequately leading to immediate frustration….cause not by the turners inability, but by the poor quality of tools.
We strongly recommend this set of six HSS turning tools. It contains the six basic tools which the turner will always have a need for. This set does not back you into the corner of making an early choice between spindle and bowl turning. Instead it allows the turner to try out both disciplines.
|
|
 | Texan Turning Tools
This is a selection of large scale work for those carrying out massive projects. Not only are they longer in reach but their large section makes them more stable and less prone to vibration. Overall length including handle is 38" |
|
 | Threading Tools
If you have been making lidded boxes for a while the next step is to started producing threaded lids. This is not a project for the novice or the faint hearted. Producing threads needs a lot of practice and a steady hand but once mastered this technique adds significant value to your project.
These Robert Sorby thread cutters were designed in conjunction with master turner Robert Sorby and have been specially produced for cutting in wood. Thread cutters are available in matching pairs for internal and external threads.
The Relief Tool is a handy accessory to cut the relief in the bottom of female threads whilst the Tool Support enables extra access.
The gauge is extremely useful for any box maker as it enables the accurate sizing of the lid whether threaded or a push fit. One of the anvils gives a 1:1 measurement for a push fit whilst the other three accurately give the size required for the specific depth of thread - whether 10ppi, 16ppi or 20ppi.
Watch a Thread Cutting Video Clip:
Cutting an external thread (29mb)
Cutting an internal thread (33mb)
Using the Robert Sorby thread or sizing gauge (30mb)
|
|
